Re: [PATCH v3 08/11] arm64: dts: qcom: kaanapali: Add the second DSI controller and PHY

From: Joonhoe Kim

Date: Sat Nov 21 2026 - 12:23:27 EST


On Fri, Nov 20, 2026 at 09:23:10PM +0530, Venkat Yadlapati wrote:
> Kaanapali has two DSI controllers. Describe DSI1 and its PHY next to
> DSI0, connect it to the INTF2 output of the display processor and feed
> the PHY's byte and pixel clocks to the display clock controller.

Tested on a Lenovo Y700 Gen 5 (TB323FU, Kaanapali), whose dual-DSI
panel uses both links, with a board DT that is not upstream yet. Both
DSI hosts bind, and the panel works after boot, after a display
blank/unblank and after s2idle.

Tested-by: Joonhoe Kim <26rote@xxxxxxxxx> # Lenovo Y700 Gen 5 (TB323FU)