Re: [PATCH v2 2/2] media: i2c: ov13858: Add device tree support

From: Haipeng Lin

Date: Sat Nov 21 2026 - 14:10:52 EST


On 10/18/26 5:10 PM, George Neacsu via B4 Relay wrote:
> From: George Neacsu <geocausa@xxxxxxxxx>
>
> Add an OF match table for OV13858 and parse its firmware endpoint at
> probe time. Require a four-lane D-PHY endpoint and both link frequencies
> used by the existing sensor modes.

[...]

Hi George,

Tested on a Surface Pro 11 (X1P-64-100, LCD 5G) together with Sergey's
power v4 on a v7.3.4-based tree with out-of-tree CCI/CAMSS & camera DT
nodes.

The sensor binds via OF at cci0 bus 1 (0x10) on csiphy1 (4 lanes,
540/270 MHz) and streams 4224x3136 at ~30 fps via libcamera v0.7.2.

A few notes from the X1P/LCD SKU for a future SP11 DT supporting the
cameras:

- The rear module is mounted upside down on this device
(rotation = <180>)
- Routing and power sequencing match what you decoded for X1E/OLED:
IR, rear, and front sensors all identify on cci0 bus 0, cci0 bus 1,
cci1 bus 1.
- Rear VCM at 0x0c on cci0 bus 1 works with dw9719 as "donwoon,dw9800k"
(vdd = L16B; focus_absolute shifts focus) but it only answers when
the sensor's DOVDD (L6M) is up so dw9719 times out at boot unless we
keep L6M on.

Tested-by: Haipeng Lin <jimmie.lin@xxxxxxxxx> # Surface Pro 11 (LCD 5G)

Thanks,
Haipeng