[PATCH 0/3] power: supply: bq27xxx: fix wrong battery states after resume
From: Michael Auer
Date: Sat Nov 21 2026 - 15:41:48 EST
On a OnePlus 6 (bq27541 on i2c-qcom-geni) user space sometimes sees a
wrong battery state right after resume.
Patch 1 fixes "Not charging" while on battery, when the current reads 0
after deep sleep. Patches 2 and 3 fix a battery that is reported as
missing at 0 % after a failed read, which made the desktop start its
critical battery action. It happened in about 1 of 350 resumes. Patch 2
covers a single missed transfer, patch 3 a failure that lasts longer.
All three are in daily use on a OnePlus 6 with an sdm845-mainline
7.1-rc1 based kernel, patch 1 since late September, patches 2 and 3
since early October. On power-supply for-next they were only build
tested (W=1, arm64 and x86_64 allmodconfig).
Tool use: the analysis, the code and the commit messages were
written with an LLM coding assistant (Claude Code). I reviewed all
of it and tested it on my phone as described above.
Michael Auer (3):
power: supply: bq27xxx: report discharging at zero current without a
charger
power: supply: bq27xxx: retry a failed register read once
power: supply: bq27xxx: keep the last values over a short read failure
drivers/power/supply/bq27xxx_battery.c | 60 ++++++++++++++++++++++++++
include/linux/power/bq27xxx_battery.h | 2 +
2 files changed, 62 insertions(+)
base-commit: abbe0a96bdbadae9e29489a1528fa436c55aca25
--
2.43.0