[PATCH] ARM: dts: qcom: msm8974-hammerhead: Fix the IMU mount matrix
From: EMCP333 via B4 Relay
Date: Sun Nov 22 2026 - 00:13:07 EST
From: EMCP333 <emcp@xxxxxxxx>
The mount matrix added for the MPU6515 is the negative of the one the
vendor kernel uses. LG's hammerhead device tree maps the axes as
axis_map_x = <1>; axis_map_y = <0>; axis_map_z = <2>;
negate_x = <0>; negate_y = <0>; negate_z = <1>;
that is x = y_raw, y = x_raw, z = -z_raw, while the current matrix gives
x = -y_raw, y = -x_raw, z = z_raw. Every axis is inverted, so a phone
lying face up reads -1 g on z (face down), and held upright in portrait
it reads -1 g on y, which orientation daemons take as upside down: the
screen rotates to 180 degrees when the phone is held normally.
The current matrix also has determinant -1, a reflection, which no
physical mounting can produce. The vendor mapping is a proper rotation
and gives +1 g out of the screen when face up, as
Documentation/devicetree/bindings/iio/mount-matrix.txt expects.
Tested on a Nexus 5 running the postmarketOS 6.16 kernel with only this
matrix changed in its DTB. Held upright, sideways both ways and lying
face up, it read +9.7 m/s^2 on y, +9.7 and -9.7 on x, and +9.4 to +10.0
on z, and the orientation daemon turned the screen the right way up in
each case. With the old matrix, portrait was shown upside down. On
v7.4-rc2 the DTB builds with no new dtbs_check warnings.
The code and this changelog were prepared with the help of an AI coding
assistant. The submitter has reviewed both and takes responsibility for
them.
Fixes: 73c9729f0fb5 ("ARM: dts: qcom: msm8974-hammerhead: add mount matrix for IMU")
Signed-off-by: EMCP333 <emcp@xxxxxxxx>
---
arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index e34d7b864e..9128c66125 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -213,9 +213,9 @@ mpu6515@68 {
pinctrl-names = "default";
pinctrl-0 = <&mpu6515_pin>;
- mount-matrix = "0", "-1", "0",
- "-1", "0", "0",
- "0", "0", "1";
+ mount-matrix = "0", "1", "0",
+ "1", "0", "0",
+ "0", "0", "-1";
i2c-gate {
#address-cells = <1>;
---
base-commit: 7475ea8b58616b33c04afb976cf0fbaad9dd63fb
change-id: 20261122-b4-hammerhead-imu-mount-matrix-3baa8237755a
Best regards,
--
EMCP333 <emcp@xxxxxxxx>