[PATCH v2 4/4] arm64: dts: qcom: nord-rrd: Describe the PCIe M.2 Key B connector

From: Krishna Chaitanya Chundru

Date: Sun Nov 22 2026 - 01:46:31 EST


The Nord RRD has an M.2 WWAN slot connected to PCIe3, but neither the
slot supply nor its power control is described. Describe the slot as a
PCIe M.2 Mechanical Key B connector, so that the slot power is
controlled through the pwrseq-pcie-m2 driver and the PCI pwrctrl
framework.

The slot is powered by the vreg_wwan fixed regulator, which is enabled
by the MODEM_SW_PWR_EN GPIO. The MOD_FULL_CARD_POWER_ON_OFF GPIO drives
FULL_CARD_POWER_OFF#, which the Adapter treats as asserted when the
signal is low, so describe it as active low.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/nord-rrd.dts | 40 +++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/nord-rrd.dts b/arch/arm64/boot/dts/qcom/nord-rrd.dts
index 827d3ba3a238..59a0210e7fbd 100644
--- a/arch/arm64/boot/dts/qcom/nord-rrd.dts
+++ b/arch/arm64/boot/dts/qcom/nord-rrd.dts
@@ -100,6 +100,40 @@ vreg_wcn_core_vh_1p95: regulator-wcn-core-vh-1p95 {
enable-active-high;
};

+ vreg_wwan: regulator-wwan {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg_wwan";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ wwan-connector {
+ compatible = "pcie-m2-b-connector";
+ vpcie3v3-supply = <&vreg_wwan>;
+
+ full-card-power-off-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wwan_m2_pcie_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&pcie3_port0_ep>;
+ };
+ };
+ };
+ };
+
wcn7850-pmu {
compatible = "qcom,wcn7850-pmu";

@@ -537,6 +571,12 @@ &pcie3 {
&pcie3_port0 {
reset-gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+
+ port {
+ pcie3_port0_ep: endpoint {
+ remote-endpoint = <&wwan_m2_pcie_ep>;
+ };
+ };
};

&qupv3_0 {

--
2.34.1