Slackware 3.0, procps-0.99, 486DX33, IDE, NCPFS, KSMBFS, NFS,
IP Acct, IP Firewall, IP Alias, NE2000, Real time clock, Watchdog.
Jim
>
> i just installed linux 1.3.95, upgrading from 85 and earlier beta versions.
> im getting a mess of these on logins, and had a couple (first two) at bootup.
> the original installation was slackware 3.0 running 1.3.20, upgraded to 1.3.57,
> then 85. this is the first i've seen this. any clues?
>
> fcntl_setlk() called by process 71 with broken flock() emulation
> fcntl_setlk() called by process 73 with broken flock() emulation
> fcntl_setlk() called by process 80 with broken flock() emulation
> fcntl_setlk() called by process 79 with broken flock() emulation
> fcntl_setlk() called by process 79 with broken flock() emulation
> fcntl_setlk() called by process 91 with broken flock() emulation
> fcntl_setlk() called by process 91 with broken flock() emulation
> fcntl_setlk() called by process 80 with broken flock() emulation
>
> here's my config:
>
> #
> # Automatically generated make config: don't edit
> #
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODVERSIONS=y
> CONFIG_KERNELD=y
>
> #
> # General setup
> #
> # CONFIG_MATH_EMULATION is not set
> CONFIG_NET=y
> # CONFIG_MAX_16M is not set
> CONFIG_PCI=y
> # CONFIG_PCI_OPTIMIZE is not set
> CONFIG_SYSVIPC=y
> CONFIG_BINFMT_AOUT=m
> CONFIG_BINFMT_ELF=y
> CONFIG_KERNEL_ELF=y
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> CONFIG_M586=y
> # CONFIG_M686 is not set
>
> #
> # Floppy, IDE, and other block devices
> #
> CONFIG_BLK_DEV_FD=m
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see drivers/block/README.ide for help/info on IDE drives
> #
> CONFIG_BLK_DEV_HD_IDE=y
> CONFIG_BLK_DEV_IDECD=y
> # CONFIG_BLK_DEV_IDETAPE is not set
> # CONFIG_BLK_DEV_IDE_PCMCIA is not set
> # CONFIG_BLK_DEV_CMD640 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> # CONFIG_BLK_DEV_TRITON is not set
> # CONFIG_IDE_CHIPSETS is not set
> # CONFIG_BLK_DEV_RAM is not set
> CONFIG_BLK_DEV_LOOP=m
> CONFIG_BLK_DEV_HD=y
> # CONFIG_BLK_DEV_XD is not set
> # CONFIG_BLK_DEV_MD is not set
>
> #
> # Networking options
> #
> # CONFIG_FIREWALL is not set
> # CONFIG_NET_ALIAS is not set
> CONFIG_INET=y
> # CONFIG_IP_FORWARD is not set
> # CONFIG_IP_MULTICAST is not set
> # CONFIG_IP_ACCT is not set
> # CONFIG_ARPD is not set
>
> #
> # (it is safe to leave these untouched)
> #
> # CONFIG_INET_PCTCP is not set
> # CONFIG_INET_RARP is not set
> # CONFIG_NO_PATH_MTU_DISCOVERY is not set
> # CONFIG_TCP_NAGLE_OFF is not set
> CONFIG_IP_NOSR=y
> CONFIG_SKB_LARGE=y
>
> #
> #
> #
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_AX25 is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_NETLINK is not set
>
> #
> # SCSI support
> #
> # CONFIG_SCSI is not set
>
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
> CONFIG_DUMMY=m
> # CONFIG_SLIP is not set
> # CONFIG_PPP is not set
> # CONFIG_STRIP is not set
> # CONFIG_WIC is not set
> # CONFIG_SCC is not set
> # CONFIG_PLIP is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_DLCI is not set
> CONFIG_NET_ALPHA=y
> # CONFIG_NET_VENDOR_SMC is not set
> # CONFIG_LANCE is not set
> # CONFIG_NET_VENDOR_3COM is not set
> CONFIG_NET_ISA=y
> # CONFIG_E2100 is not set
> # CONFIG_DEPCA is not set
> # CONFIG_EWRK3 is not set
> # CONFIG_SEEQ8005 is not set
> # CONFIG_AT1700 is not set
> # CONFIG_FMV18X is not set
> CONFIG_EEXPRESS_PRO=y
> # CONFIG_EEXPRESS is not set
> # CONFIG_NI52 is not set
> # CONFIG_NI65 is not set
> # CONFIG_WAVELAN is not set
> # CONFIG_ETH16I is not set
> # CONFIG_HPLAN_PLUS is not set
> # CONFIG_HPLAN is not set
> # CONFIG_HP100 is not set
> # CONFIG_NE2000 is not set
> # CONFIG_SK_G16 is not set
> # CONFIG_NET_EISA is not set
> # CONFIG_NET_POCKET is not set
> # CONFIG_TR is not set
> # CONFIG_ARCNET is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN is not set
>
> #
> # CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
> #
> # CONFIG_CD_NO_IDESCSI is not set
>
> #
> # Filesystems
> #
> # CONFIG_QUOTA is not set
> CONFIG_MINIX_FS=y
> # CONFIG_EXT_FS is not set
> CONFIG_EXT2_FS=y
> # CONFIG_XIA_FS is not set
> CONFIG_FAT_FS=m
> CONFIG_MSDOS_FS=m
> CONFIG_VFAT_FS=m
> CONFIG_UMSDOS_FS=m
> CONFIG_PROC_FS=y
> # CONFIG_NFS_FS is not set
> CONFIG_SMB_FS=m
> CONFIG_ISO9660_FS=m
> # CONFIG_HPFS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_UFS_FS is not set
>
> #
> # Character devices
> #
> CONFIG_SERIAL=y
> # CONFIG_DIGI is not set
> # CONFIG_CYCLADES is not set
> # CONFIG_STALDRV is not set
> # CONFIG_RISCOM8 is not set
> CONFIG_PRINTER=m
> # CONFIG_BUSMOUSE is not set
> # CONFIG_PSMOUSE is not set
> # CONFIG_MS_BUSMOUSE is not set
> # CONFIG_ATIXL_BUSMOUSE is not set
> # CONFIG_UMISC is not set
> # CONFIG_QIC02_TAPE is not set
> # CONFIG_FTAPE is not set
> # CONFIG_APM is not set
> # CONFIG_WATCHDOG is not set
> # CONFIG_RTC is not set
>
> #
> # Sound
> #
> CONFIG_SOUND=m
>
> #
> # Kernel hacking
> #
> # CONFIG_PROFILE is not set
>
-- James R. Leu Network Administrator CORE Digital Communication Services jleu@coredcs.com