eth0: reset did not complete at ei_rx_overrun

Thomas =?ISO-8859-1?Q?K=F6nig?= (Thomas.Koenig@ciw.uni-karlsruhe.de)
Tue, 7 May 1996 18:58:41 +0200 (MET DST)

I got the above error message with 1.3.99. I have no idea what
it means; there didn't appear to be anything wrong with the system
afterwards.

Here are the complete messages. The system is a P90 with 32 Megs of
RAM and a NCR 53c810, no IDE. Complete config follows.

May 7 15:37:17 myhost kernel: eth0: 3c503 at i/o base 0x310, node 02 60 8c 8d 94 c6, using internal xcvr.
May 7 15:37:17 myhost kernel: eth0: 3c503/16 - 16kB RAM, 8kB shared mem window at 0xcc000-0xcdfff.
May 7 18:30:23 myhost kernel: eth0: reset did not complete at ei_rx_overrun.

CONFIG_EXPERIMENTAL=y
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KERNELD=y
CONFIG_NET=y
CONFIG_PCI=y
CONFIG_PCI_OPTIMIZE=y
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_M586=y
CONFIG_BLK_DEV_FD=y
CONFIG_FIREWALL=y
CONFIG_INET=y
CONFIG_IP_FIREWALL=y
CONFIG_IP_ACCT=y
CONFIG_ARPD=y
CONFIG_INET_PCTCP=y
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y
CONFIG_NETLINK=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_NCR53C7xx=y
CONFIG_SCSI_NCR53C7xx_sync=y
CONFIG_SCSI_NCR53C7xx_DISCONNECT=y
CONFIG_SCSI_PPA=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL2=y
CONFIG_QUOTA=y
CONFIG_MINIX_FS=y
CONFIG_EXT2_FS=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_PROC_FS=y
CONFIG_NFS_FS=y
CONFIG_ISO9660_FS=y
CONFIG_SERIAL=y
CONFIG_RTC=y

-- 
Thomas Koenig, Thomas.Koenig@ciw.uni-karlsruhe.de, ig25@dkauni2.bitnet.
The joy of engineering is to find a straight line on a double
logarithmic diagram.