I've been working on compiling Linux kernel pre2.0.9, a.k.a. 1.99.9.
Configuring the kernel compile with menuconfig, the compile fails with a
linker error, apparently in routines associated with my SoundBlaster sound
card. The last page of makefile output is:
>make[2]: Entering directory /usr/src/linux-pre2.0.9/arch/i386/lib'
>gcc -D__KERNEL__ -I/usr/src/linux-pre2.0.9/include -Wall -Wstrict-prototypes
>-O2 -fomit-frame-pointer -fno-strength-reduce -pipe -m486 -DCPU=486 -c -o
>checksum.o checksum.c
>rm -f lib.a
>ar rcs lib.a checksum.o
>make[2]: Leaving directory /usr/src/linux-pre2.0.9/arch/i386/lib'
>make[1]: Leaving directory /usr/src/linux-pre2.0.9/arch/i386/lib'
>ld -m elf_i386 -Ttext 0x100000 -e stext arch/i386/kernel/head.o init/main.o
>init/version.o \
> arch/i386/kernel/kernel.o arch/i386/mm/mm.o kernel/kernel.o mm/mm.o
>fs/fs.o ipc/ipc.o net/network.a \
> fs/filesystems.a \
> drivers/block/block.a drivers/char/char.a drivers/net/net.a
>drivers/cdrom/cdrom.a drivers/scsi/scsi.a drivers/sound/sound.a \
> /usr/src/linux-pre2.0.9/arch/i386/lib/lib.a
>/usr/src/linux-pre2.0.9/lib/lib.a
>/usr/src/linux-pre2.0.9/arch/i386/lib/lib.a -o vmlinux
>sb_dsp.o(.text+0x15e): undefined reference to `Sb16_dsp_interrupt'
>sb_dsp.o(.text+0x1ec): undefined reference to `DMAbuf_outputintr'
>sb_dsp.o(.text+0x21a): undefined reference to `DMAbuf_inputintr'
>sb_dsp.o(.text+0xc9c): undefined reference to `Sb16_dsp_detect'
>sb_dsp.o(.text+0xcb8): undefined reference to `Sb16_dsp_init'
>sb_dsp.o(.text+0xd56): undefined reference to `Unload_sb16'
>make: *** [vmlinux] Error 1
Doing the compile with the same options and the older "make config" results
in a successful compile. I've attached my configuration file from
menuconfig for the aborted compile.
If I can be of further help to you in troubleshooting this, please let me know.
--=====================_833713138==_
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: attachment; filename="kernel209.config"
#
# Automatically generated by make menuconfig: don't edit
#
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_KERNELD is not set
#
# General setup
#
# CONFIG_MATH_EMULATION is not set
CONFIG_NET=y
# CONFIG_MAX_16M is not set
# CONFIG_PCI is not set
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
CONFIG_M486=y
#
# Floppy, IDE, and other block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_IDE is not set
# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_XD is not set
#
# Networking options
#
# CONFIG_FIREWALL is not set
CONFIG_NET_ALIAS=y
CONFIG_INET=y
# CONFIG_IP_FORWARD is not set
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ACCT is not set
CONFIG_IP_ALIAS=y
# CONFIG_INET_PCTCP is not set
# CONFIG_INET_RARP is not set
# CONFIG_NO_PATH_MTU_DISCOVERY is not set
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_AX25 is not set
# CONFIG_NETLINK is not set
#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
CONFIG_SCSI_AIC7XXX=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_AM53C974 is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_RADIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
CONFIG_EL3=y
# CONFIG_VORTEX is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_EISA is not set
# CONFIG_NET_POCKET is not set
# CONFIG_TR is not set
# CONFIG_ARCNET is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
CONFIG_CD_NO_IDESCSI=y
# CONFIG_AZTCD is not set
# CONFIG_GSCD is not set
CONFIG_SBPCD=y
# CONFIG_SBPCD2 is not set
# CONFIG_MCD is not set
# CONFIG_MCDX is not set
# CONFIG_OPTCD is not set
# CONFIG_CM206 is not set
# CONFIG_SJCD is not set
# CONFIG_CDI_INIT is not set
# CONFIG_CDU31A is not set
# CONFIG_CDU535 is not set
#
# Filesystems
#
# CONFIG_QUOTA is not set
# CONFIG_LOCK_MANDATORY is not set
CONFIG_MINIX_FS=y
# CONFIG_EXT_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_XIA_FS is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_UMSDOS_FS=y
CONFIG_PROC_FS=y
CONFIG_NFS_FS=y
# CONFIG_ROOT_NFS is not set
CONFIG_SMB_FS=m
CONFIG_ISO9660_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_UFS_FS is not set
#
# Character devices
#
CONFIG_SERIAL=y
# CONFIG_DIGI is not set
# CONFIG_CYCLADES is not set
# CONFIG_STALDRV is not set
# CONFIG_RISCOM8 is not set
CONFIG_PRINTER=y
# CONFIG_BUSMOUSE is not set
# CONFIG_PSMOUSE is not set
# CONFIG_MS_BUSMOUSE is not set
# CONFIG_ATIXL_BUSMOUSE is not set
# CONFIG_UMISC is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_FTAPE is not set
# CONFIG_APM is not set
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
#
# Sound
#
CONFIG_SOUND=y
# CONFIG_PAS is not set
CONFIG_SB=y
# CONFIG_ADLIB is not set
# CONFIG_GUS is not set
# CONFIG_MPU401 is not set
# CONFIG_UART6850 is not set
# CONFIG_PSS is not set
# CONFIG_GUS16 is not set
# CONFIG_GUSMAX is not set
# CONFIG_MSS is not set
# CONFIG_SSCAPE is not set
# CONFIG_TRIX is not set
# CONFIG_MAD16 is not set
# CONFIG_CS4232 is not set
# CONFIG_MAUI is not set
# CONFIG_AUDIO is not set
CONFIG_MIDI=y
# CONFIG_YM3812 is not set
# CONFIG_SMWAVE is not set
SBC_BASE=220
SBC_IRQ=5
SBC_DMA=1
SB_DMA2=5
SB_MPU_BASE=330
SB_MPU_IRQ=-1
#
# Kernel hacking
#
# CONFIG_PROFILE is not set
--=====================_833713138==_
Content-Type: text/plain; charset="us-ascii"
Lindsay Haisley (______)
FMP Computer Services (oo) "The bull
fmouse@fmp.com /------\/ stops here!"
Austin, Texas, USA / | ||
512-259-1190 * ||---|| * * * * * *
~~ ~~ http://www.fmp.com
--=====================_833713138==_--