Hi,
>Regarding my previous message about linux-2.0 and sbpcd; I don't know what's
>wrong yet but I made it work. When I boot from LILO with "sbpcd=230,
>Soundblaster" option (as I've always done before), CD-ROM doesn't get
>mounted. That's what I get:
>Jun 11 20:28:54 borg kernel: sbpcd-0 [01]: sbpcd.c v4.4 Eberhard Moenkeberg
><emoenke@gwdg.de>
>Jun 11 20:28:54 borg kernel: sbpcd-0 [02]: Scanning 0x230 (LaserMate)...
>Jun 11 20:28:54 borg kernel: sbpcd-0 [03]: Drive 0 (ID=0): CR-562 (0.80) at
>0x230 (type 0)
Your option is written wrong ! Try "SoundBlaster" and not "Soundblaster" !
~ ~
Maybe the driver is confused about the wrong option.
But the best way is configure your "/usr/src/linux/include/linux/sbpcd.h"
for your needs. It' quite simple. As you seems to have a real SoundBlaster
with exactly one CDROM connected, you've to use the following options in
"sbpcd.h"
#if !(SBPCD_ISSUE-1) /* first (or if you have only one) interface board: */
#define CDROM_PORT 0x230 /* <-----------<< port address */
#define SBPRO 1 /* <-----------<< interface type */
#define MAX_DRIVES 1 /* set to 1 if the card does not use "drive select" */
#define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0 */
#endif
But have a look at the documentation in sbpcd.h, it's more than complete
Marc
-- ___________________________________________________________________________ Marc Neitzner | marc@zeus.han.de | Tel.: 0511-2714507 Alte Ziegelei 7 | neitzner@rvs.uni-hannover.de | Fax : 0511-2714537 30419 Hannover | |