What's happen on aic7xxx and 2.0.11

Patpong Wetyanon (pat@ksc.net.th)
Fri, 9 Aug 1996 07:27:52 -0700 (GMT)

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Alan Shutko: "Re: Linux <-> Apple Laser 16/600 [TCP problems??]"
Previous message: Ian Goldberg: "Re: Fixes to loop.c et al. for DES,IDEA,stego now done"

What does this message means:
SCSI bus is being reset for host 0 channel 0.
aic7xxx: (abort_reset) scb state 0x7, Message-In phase, SCSISIGI = 0x54
aic7xxx: Target 0, channel A, now synchronous at 10.0MHz, offset(0xf).
aic7xxx: No active SCB for reconnecting target 0, channel A - Issuing
ABORT. SAVED_TCL(0x0).
scsi : aborting command due to timeout : pid 71, scsi0, channel 0, id 0,
lun 0 0x08 03 98 e4 10 00
aic7xxx: (abort_reset) scb state 0x1, Message-In phase, SCSISIGI = 0x44
SCSI host 0 abort (pid 71) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
aic7xxx: (abort_reset) scb state 0x7, Message-In phase, SCSISIGI = 0x54
aic7xxx: Target 0, channel A, now synchronous at 10.0MHz, offset(0xf).

Thanks

Next message: Alan Shutko: "Re: Linux <-> Apple Laser 16/600 [TCP problems??]"
Previous message: Ian Goldberg: "Re: Fixes to loop.c et al. for DES,IDEA,stego now done"