I am using a NEC Versa 4050C laptop.
My laptop has Super VGA or SVGA video and I installed
the file X32SVGA.tgz from the XFree86 distribution.
I got the XF86config file for NEC Versa from the Linux laptops
home page.
I followed the instructions given in the INSTALL document to install
the X software.
I was able to run X when I used linux kernel version 1.2.13.
But when I added the patch for IP in IP,
I get the following error message when I start X.
As you see in the error message, PS2 mouse support is recognized.
Any suggestions on what I can do to make this work?
Thanks
XFree86 Version 3.1.2 / X Window System
(protocol Version 11, revision 0, vendor release 6000)
Operating System: Linux
Configured drivers:
SVGA: server for 8-bit colour SVGA (Patchlevel 0):
et4000, et4000w32, et4000w32i, et4000w32p, et3000, pvga1, wd90c00,
wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, vgawonder,
tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga9000, clgd5420,
clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430,
clgd5434,
clgd5436, clgd6205, clgd6215, clgd6225, clgd6235, ncr77c22,
ncr77c22e,
cpq_avga, oti067, oti077, oti087, mx, al2101, ali2228, ali2301,
ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7,
ct65520, ct65530, ct65540, ct65545, ark1000vl, ark1000pv,
ark2000pv,
realtek, generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) Mouse: type: PS/2, device: /dev/psaux, baudrate: 1200,
3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "Laptop"
(**) SVGA: Monitor ID: "C&T Laptop"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/"
(**) SVGA: chipset: ct65545
(**) SVGA: videoram: 1024k
(--) SVGA: clocks: 28.38 28.32 28.33 28.32 28.37 28.32 28.32
28.39
(--) SVGA: Maximum allowed dot-clock: 65.000 MHz
(--) SVGA: There is no defined dot-clock matching mode "1024x768"
(--) SVGA: Removing mode "1024x768" from list of valid modes.
(--) SVGA: There is no mode definition named "800+600"
(--) SVGA: Removing mode "800+600" from list of valid modes.
(**) SVGA: Mode "800x600": mode clock = 28.300, clock used = 28.320
(--) SVGA: There is no mode definition named "704x600"
(--) SVGA: Removing mode "704x600" from list of valid modes.
(**) SVGA: Mode "640x480": mode clock = 28.300, clock used = 28.320
(--) SVGA: Virtual resolution set to 800x600
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
Fatal server error:
Cannot open mouse (Device or resource busy)
xinit: No such file or directory (errno 2): unexpected signal 13