------------------------------------------
Michael Slater
aonline@tnet.com.au
http://www.tnet.com.au/~aonline
------------------------------------------
On Thu, 22 Aug 1996, Rajnish Sinha wrote:
>
> I am trying to install X windows on linux. My linux version is
> 1.2.13 with a patch for IP in IP tunnelling support. I have
> installed XFree86 version 3.1.2 with files from the elf and common
> distribution.
>
> I am using a NEC Versa 4050C laptop.
> My laptop has Super VGA or SVGA video and I installed
> the file X32SVGA.tgz from the XFree86 distribution.
> I got the XF86config file for NEC Versa from the Linux laptops
> home page.
> I followed the instructions given in the INSTALL document to install
> the X software.
>
> I was able to run X when I used linux kernel version 1.2.13.
> But when I added the patch for IP in IP,
> I get the following error message when I start X.
> As you see in the error message, PS2 mouse support is recognized.
>
> Any suggestions on what I can do to make this work?
>
> Thanks
>
>
> XFree86 Version 3.1.2 / X Window System
> (protocol Version 11, revision 0, vendor release 6000)
> Operating System: Linux
> Configured drivers:
> SVGA: server for 8-bit colour SVGA (Patchlevel 0):
> et4000, et4000w32, et4000w32i, et4000w32p, et3000, pvga1, wd90c00,
> wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, vgawonder,
> tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga9000, clgd5420,
> clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430,
> clgd5434,
> clgd5436, clgd6205, clgd6215, clgd6225, clgd6235, ncr77c22,
> ncr77c22e,
> cpq_avga, oti067, oti077, oti087, mx, al2101, ali2228, ali2301,
> ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7,
> ct65520, ct65530, ct65540, ct65545, ark1000vl, ark1000pv,
> ark2000pv,
> realtek, generic
> (using VT number 7)
>
> XF86Config: /usr/X11R6/lib/X11/XF86Config
> (**) stands for supplied, (--) stands for probed/default values
> (**) Mouse: type: PS/2, device: /dev/psaux, baudrate: 1200,
> 3 button emulation (timeout: 50ms)
> (**) SVGA: Graphics device ID: "Laptop"
> (**) SVGA: Monitor ID: "C&T Laptop"
> (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/"
> (**) SVGA: chipset: ct65545
> (**) SVGA: videoram: 1024k
> (--) SVGA: clocks: 28.38 28.32 28.33 28.32 28.37 28.32 28.32
> 28.39
> (--) SVGA: Maximum allowed dot-clock: 65.000 MHz
> (--) SVGA: There is no defined dot-clock matching mode "1024x768"
> (--) SVGA: Removing mode "1024x768" from list of valid modes.
> (--) SVGA: There is no mode definition named "800+600"
> (--) SVGA: Removing mode "800+600" from list of valid modes.
> (**) SVGA: Mode "800x600": mode clock = 28.300, clock used = 28.320
> (--) SVGA: There is no mode definition named "704x600"
> (--) SVGA: Removing mode "704x600" from list of valid modes.
> (**) SVGA: Mode "640x480": mode clock = 28.300, clock used = 28.320
> (--) SVGA: Virtual resolution set to 800x600
> (--) SVGA: SpeedUp code selection modified because virtualX != 1024
>
> Fatal server error:
> Cannot open mouse (Device or resource busy)
>
> xinit: No such file or directory (errno 2): unexpected signal 13
>