Boot messages are:
Configuring Adaptec (SCSI-ID 7) at IO :334, IRQ 10, DMA priority 5
aha1542.c: Using extended bios translation
scsi0 : Adaptec 1542
scsi : 1 host.
Vendor: DEC Model: DSP3105S Rev: 386C
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 2, lun 0
Vendor: SEAGATE Model: ST31200N Rev: 8648
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 4, lun 0
Vendor: NEC Model: CD-ROM DRIVE:502 Rev: 2.3
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0
scsi : detected 1 SCSI cdrom 2 SCSI disks total.
aha1542.c: Trying device reset for target 5
HACC aha1542.c: interrupt received, but no mail.
Sent BUS RESET to scsi host 0
SCSI device sda: hdwr sector= 512 bytes. Sectors= 2050860 [1001 MB]
SCSI device sda: hdwr sector= 512 bytes. Sectors= 2061108 [1006 MB]
Thanks
Tony
-- E-Mail: Tony Gale <gale@minotaur.dra.hmg.gb> So many men, so many opinions; every one his own way. -- Publius Terentius Afer (Terence)The views expressed above are entirely those of the writer and do not represent the views, policy or understanding of any other person or official body.