Someone else wrote:
>> that fix a bug in parport_procfs before. Be sure also to not run "echo
>> 0>/proc/parport/?/irq" because the parport procfs will free the 0 irq in
>> order to gain it and your machine will hang (of course if int 0 is the
>> timer interrupt as with i386).
>
>Right now parport as of 2.1.8x doesnt even detect my parallel port. The old
>lp driver did, the direct qcam drives it fine but parport loads and sees
>zilch
As of 2.1.78 (and 2.1.82), I receive the correct io port but the wrong irq.
# cat /proc/parport/0/hardware
base: 0x378
irq: none
dma: none
modes: SPP
It was easily fixed by:
options parport_pc io=0x378 irq=7
# cat /proc/parport/0/hardware
base: 0x378
irq: 7
dma: none
modes: SPP
I have an old crummy SPP parallel port and an ECP port (both on 486's) that
I can test with if someone has patches. They are currently connected by
PLIP.
-George Greer
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu