Note that the device may claim to be in some initialisation process
only after a reset and while it is spinning up.
Gerard.
On Sun, 15 Feb 1998, Andreas Haumer wrote:
> Hi!
>
> Robert L Harris wrote:
> >
> > When I try and read files off my jaz, usually it seems to lock my machine.
> > It locks the scsi activity light on and if I can get to the console I get
> > alot of errors concerning the queue. This time I didn't change the adapter
> > defaults.
> >
> > Who do I work with to see about fixing this?
> >
> Try disabling command queueing for the JAZ device in the adapter
> setup. This helped for me, though I have to admit that a SCSI device
> shouldn't completely lock up the system.
>
> With a ncr53c8xx-based board the JAZ drive still doesn't work well with
> command queueing, but the driver doesn't completely lock up the machine,
> it returns an error code after a short timeout and continues working.
>
> With command queuing turned off for the JAZ drive it works stable and
> well!
>
> Hope that helps!
>
> - andreas
>
> --
> Andreas Haumer | email: andreas@xss.co.at | PGP key available
> *x Software + Systeme | phone: +43.1.6001508 | on request.
> Buchengasse 67/8 | +43.664.3004449 |
> A-1100 Vienna, Austria | fax: +43.1.6001507 |
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu