2.1.94 as module, 2.1.95 compiled in, started with parport=0x378,7
lpq says 'waiting for lp to become ready (offline?)
dmesg of .95 attached.
-- Garst --------------CE831BB810FF6A04EB2B3D05 Content-Type: text/plain; charset=us-ascii; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg"Linux version 2.1.95 (root@grr) (gcc version egcs-2.90.27 980315 (egcs-1.0.2 release)) #1 Fri Apr 10 16:43:57 ADT 1998 Console: 16 point font, 400 scans Console: colour VGA+ 80x25, 1 virtual console (max 63) Calibrating delay loop... 33.28 BogoMIPS Memory: 19024k/20480k available (620k kernel code, 392k reserved, 420k data, 24k init) Checking if this processor honours the WP bit even in supervisor mode... Ok. Swansea University Computer Society NET3.039 for Linux 2.1 Swansea University Computer Society TCP/IP for NET3.037 IP Protocols: ICMP, UDP, TCP CPU: Intel 486 DX/2 stepping 05 Checking 386/387 coupling... Ok, fpu using exception 16 error reporting. Checking 'hlt' instruction... Ok. POSIX conformance testing by UNIFIX Starting kswapd v 1.5 parport0: PC-style at 0x378, irq 7 [SPP,PS2] Serial driver version 4.24 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16450 ttyS01 at 0x02f8 (irq = 3) is a 16450 lp0: using parport0 (interrupt-driven). APM BIOS version 1.0 Flags 0xf3 (Driver version 1.4) Entry f000:762f cseg16 f000 dseg f000 AC on line, battery status high, battery life 100% hda: TOSHIBA MK1302MAN, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: TOSHIBA MK1302MAN, 1296MB w/128kB Cache, CHS=658/64/63 Partition check: hda: hda1 hda2 hda3 VFS: Mounted root (ext2 filesystem) readonly. Starting kmod Freeing unused kernel memory: 24k freed Adding Swap: 42332k swap-space (priority -1) IPv4 over IPv4 tunneling driver NET3: Unix domain sockets 0.16 for Linux NET3.038. Linux PCMCIA Card Services 3.0.1 kernel build: 2.1.95 #1 Fri Apr 10 16:43:57 ADT 1998 options: [apm] Intel PCIC probe: Cirrus PD672x at port 0x3e0 ofs 0x00, 2 sockets host opts [0]: [ring] [65/6/0] [1/15/0] host opts [1]: [ring] [freq bypass] [65/6/0] [1/15/0] ISA irqs (default) = 3,4,5,9,10,11,12 status change on irq 11 cs: IO port probe 0x0100-0x03ff: excluding 0x190-0x197 0x228-0x22f 0x250-0x257 0x290-0x297 0x388-0x397 0x3b8-0x3e7 cs: memory probe 0x0c8000-0x0cffff: clean. Ql: Using preset base address of 230 Ql: Using preset IRQ 3 scsi0 : Qlogicfas Driver version 0.46, chip 50 at 230, IRQ 3, TPdma:1 scsi : 1 host. Vendor: SyQuest Model: EZ135S Rev: 1_13 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi removable disk sda at scsi0, channel 0, id 3, lun 0 Vendor: MATSHITA Model: KME CD-ROM02 Rev: 1.05 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0 Uniform CD-ROM driver Revision: 2.12 SCSI device sda: hdwr sector= 512 bytes. Sectors= 262144 [128 MB] [0.1 GB] sda: Write Protect is off sda: sda1 VFS: Disk change detected on device 0b:00 tty02 at 0x03e8 (irq = 9) is a 16550A
--------------CE831BB810FF6A04EB2B3D05--
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu