DS
> Here's an abbreviated startup log:
>
>CPU: AMD K6 (166 - 266) stepping 01
>Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
>Checking 'hlt' instruction... Ok.
>PCI: BIOS32 Service Directory structure at 0xc00fb080
>PCI: BIOS32 Service Directory entry at 0xfb480
>PCI: PCI BIOS revision 2.10 entry at 0xfb4b0
>PCI: Probing PCI hardware.
>PCI: Bogus IRQ for device 00:98 [pin=1], please report to <mj@ucw.cz>
>APM BIOS version 1.2 Flags 0x07 (Driver version 1.4)
> Entry f000:803e cseg16 f000 dseg fdfc cseg len 20a, cseg16 len 0, dseg
>len 0
> Connection version 1.2
> AC on line, battery status unknown, battery life unknown
> battery flag 0x80, battery life unknown
>PIIX4: IDE controller on PCI bus 00 dev 39
>PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>aic7xxx: <Adaptec AHA-294X Ultra SCSI host adapter> at PCI 16
>aic7xxx: BIOS enabled, IO Port 0x6300, IO Mem 0xe4001000, IRQ a, Revision B
>aic7xxx: Single Channel, SCSI ID 7, 16/255 SCBs, QFull 16, QMask 0x1f
>tulip.c:v0.83 10/19/97 becker@cesdis.gsfc.nasa.gov
>eth0: Digital DS21041 Tulip at 0x6800, 21041 mode, 00 40 05 40 ae c0, IRQ
9.
>eth0:21041 Media information at 30, default media 0800 (Autosense).
>eth0: 21041 media 00 (10baseT), csr13 0104 csr14 0000 csr15 0000.
>eth0: 21041 media 00 (10baseT), csr13 0000 csr14 0000 csr15 0000.
>eth0: 21041 media 00 (10baseT), csr13 0000 csr14 0000 csr15 0000.
>
> Here's a /proc/pci
>
>PCI devices found:
> Bus 0, device 0, function 0:
> Host bridge: Intel 82439TX (rev 1).
> Medium devsel. Master Capable. Latency=32.
> Bus 0, device 7, function 0:
> ISA bridge: Intel 82371AB PIIX4 ISA (rev 1).
> Medium devsel. Fast back-to-back capable. Master Capable. No
>bursts.
> Bus 0, device 7, function 1:
> IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
> Medium devsel. Fast back-to-back capable. Master Capable.
>Latency=32.
> I/O at 0xf000 [0xf001].
> Bus 0, device 7, function 2:
> USB Controller: Intel 82371AB PIIX4 USB (rev 1).
> Medium devsel. Fast back-to-back capable. IRQ b. Master Capable.
>Latency=64.
> I/O at 0x6700 [0x6701].
> Bus 0, device 7, function 3:
> Bridge: Intel 82371AB PIIX4 ACPI (rev 1).
> Medium devsel. Fast back-to-back capable.
> Bus 0, device 16, function 0:
> SCSI storage controller: Adaptec AIC-7881U (rev 0).
> Medium devsel. Fast back-to-back capable. IRQ a. Master Capable.
>Latency=32. Min Gnt=8.Max Lat=8.
> I/O at 0x6300 [0x6301].
> Non-prefetchable 32 bit memory at 0xe4001000 [0xe4001000].
> Bus 0, device 17, function 0:
> Ethernet controller: DEC DC21041 (rev 33).
> Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable.
>Latency=32.
> I/O at 0x6800 [0x6801].
> Non-prefetchable 32 bit memory at 0xe4000000 [0xe4000000].
> Bus 0, device 19, function 0:
> VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 1).
> Medium devsel. Master Capable. Latency=32. Min Gnt=4.Max Lat=255.
> Non-prefetchable 32 bit memory at 0xe0000000 [0xe0000000].
>
> And here's /proc/interrupts
>
> CPU0
> 0: 9189 XT PIC timer
> 1: 487 XT PIC keyboard
> 2: 0 XT PIC cascade
> 8: 0 XT PIC rtc
> 9: 76 XT PIC Digital DS21041 Tulip
>10: 52 XT PIC aic7xxx
>13: 1 XT PIC fpu
>14: 19 XT PIC ide0
>15: 2571 XT PIC ide1
>NMI: 0
>
> The machine is a K6-200 using a TX chipset motherboard. PCI devices
>include an STB Nitro (S3 Virge/DX) video card, a Tulip ethernet NIC, an SB
>AWE64, and an Adaptec SCSI card (2940u?). If you need any additional
>information, email me.
>
> Should I be worried?
>
> DS
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu