Re: Linux-2.1.98..

Roy P. Turner (ecstasy@dopamine.com)
Fri, 24 Apr 1998 08:41:18 -0400

In message <19980424074725.A605@jackalz.dyn.ml.org>, Myrdraal writes:
> Hi,
> Has anyone had any luck with 2.1.98 on an IDE system? It gets a null
> pointer dereference in swapper, oopses, and "Aiee, killing interrupt
> handler"s. It does that right after printing out the PIO information
> for my IDE chipset. I had no problems in 2.1.97.
> -Myrdraal

Works fine here on a VIA VP2 based board with three UDMA IDE drives.

VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x6000-0x6007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x6008-0x600f, BIOS settings: hdc:pio, hdd:pio
hda: WDC AC12100L, ATA DISK drive
hdb: WDC AC22000L, ATA DISK drive
hdc: WDC AC24300L, ATA DISK drive
hdd: ATAPI CDROM, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: WDC AC12100L, 2014MB w/256kB Cache, CHS=4092/16/63, UDMA
hdb: WDC AC22000L, 1907MB w/256kB Cache, CHS=3876/16/63, UDMA
hdc: WDC AC24300L, 4112MB w/256kB Cache, CHS=8912/15/63, UDMA

Roy

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu