> I have a laptop that is running a kernel compiled on a system that has
> SCSI disks. The laptop doesn't, but it hasn't crashed before.
>
> 2.1.103 hung on me right after the floppy drive check:
>
> ...
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a National Semiconductor PC87306
>
> 2.1.102 didn't hang there. On 2.1.102, the output afterwards would be:
>
> ...
> scsi : 0 hosts.
> scsi : detected total.
> Partition check:
> ...
>
> If I took out CONFIG_SCSI=y, the problem went away. That disabled the
Same here, but not a laptop. I created a 2.1.103 boot floppy with SCSI
and IDE support. Works fine on the SCSI box, hangs after
FDC 0 is a post-1991 82077
on the IDE box.
One difference: the kernel was compiled on another IDE machine. Didn't
check to see if it would boot on that one.
--Mike
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu