G'day
Since 2.1.105 I have finally been able to use SCSI emulation along with
my Mitsumi CR2800TE.
Which means I can record stuff onto cds with cdrecord 1.6final.
There is a small problem though, when all data is written and it is
supposed to write the end of the session I get some errors and cdrecord
exits. The toaster continues to burn though.
I've attached the output from cdrecord -v
The write-led is still shining so I assume it is still writing.
After about 30secs (very approx) it seems to stop though.
Any ideas?
I use 2.1.106-ac1 which runs just fine otherwise on my k6-233.
Btw, how do I mount a specfic data-track?
mount -t iso9660 /dev/sr0 cdrom
will just give me the first one...
Thanks in advance!!
-- Kalle Andersson kalle.andersson@mbox303.swipnet.se --------------9DCA109519A3C3B87F3EB8D4 Content-Type: text/plain; charset=us-ascii; name="cd-problem.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="cd-problem.txt"Track 03: 21 of 21 MB written (fifo 100%). Track 03: Total bytes read/written: 22128640/22128640 (10805 sectors). Writing time: 162.585s Fixating... cdrecord: Success. close track/session: scsi sendcmd: retryable error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 06 00 00 00 00 06 00 00 00 0A 2E 00 00 00 Sense Key: 0x6 Unit Attention, Segment 0 Sense Code: 0x2E Qual 0x00 (invalid sense code 0x2E) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 3.087s timeout 480s Fixating time: 3.228s cdrecord: Success. prevent/allow medium removal: scsi sendcmd: retryable error CDB: 1E 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 06 00 00 00 00 2C 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.001s timeout 40s cdrecord: fifo had 676 puts and 676 gets. cdrecord: fifo was 0 times empty and 540 times full, min fill was 97%. -----
The write-led is still shinig so I assume it is still writing. After about 30secs (very approx) it seems to stop though. Any ideas?? --------------9DCA109519A3C3B87F3EB8D4--
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu