-Phil
--- i2c module initialized. Linux video capture interface: v0.01 ALPHA i2c char device interface initialized. i2c module initialized. Linux video capture interface: v0.01 ALPHA i2c char device interface initialized. bttv0: Brooktree Bt878 (rev 2) bus: 0, devfn: 80, irq: 11, memory: 0xe1001000. bttv0: ioremap... request_irq (11)... pci busmaster... pci latency... ok bttv: 1 Bt848 card(s) found. i2c(bit): Adapter: bt848 #0 scl: 1 sda: 1 -- testing... i2c(bit):1 scl: 1 sda: 0 i2c(bit):2 scl: 1 sda: 1 i2c(bit):3 scl: 0 sda: 1 i2c(bit):4 scl: 1 sda: 1 i2c(bit): bt848 #0 passed test. bttv0: i2c reg: I2C char device (id 0xffffffff) tuner: chip found @ 0x61 bttv0: i2c reg: i2c tv tuner chip (id 0x2) msp3400: setvolume: 0:0 0x00 0x00 msp3400: thread: start msp3400: thread: sleep bttv0: i2c reg: MSP3430G-A1 (id 0x1) msp3400: init: chip=MSP3430G-A1, registered as sound mixer i2c(bit): scanning bus bt848 #0. i2c(bit): found chip at addr=0x40 i2c(bit): found chip at addr=0x50 i2c(bit): found chip at addr=0x61 bttv0: model: HAUPPAUGE msp3400: thread: wakeup msp3400: setvolume: 0:0 0x00 0x00 msp3400: setmode: 0 msp3400: carrier1 val: 1618 / 4.5 NTSC msp3400: carrier1 val: 1385 / 5.5 PAL B/G msp3400: carrier1 val: 969 / 6.0 PAL I msp3400: carrier1 val: 649 / 6.5 PAL SAT / SECAM msp3400: setmode: 3 msp3400: B/G setstereo: 1 msp3400: setvolume: 65535:65535 0x73 0x00 msp3400: thread: sleep msp3400: thread: wakeup msp3400: stereo detect register: -16 msp3400: thread: sleep msp3400: thread: wakeup msp3400: stereo detect register: -16 msp3400: thread: sleep bttv: PCI display adapter: UNKNOWN. bttv: Unknown video memory base address. bttv: Video memory override: 0xe0000000 bttv: PCI display adapter: UNKNOWN. bttv: Unknown video memory base address. bttv: Video memory override: 0xe0000000 msp3400: setvolume: 65535:65535 0x73 0x00 msp3400: setbass: 32768 0x00 msp3400: settreble: 32768 0x00 tuner: tv freq set to 67.25 msp3400: thread: wakeup msp3400: setvolume: 0:0 0x00 0x00 msp3400: setmode: 0 msp3400: carrier1 val: 65508 / 4.5 NTSC msp3400: carrier1 val: 222 / 5.5 PAL B/G msp3400: carrier1 val: 198 / 6.0 PAL I msp3400: carrier1 val: 108 / 6.5 PAL SAT / SECAM msp3400: setmode: 3 msp3400: B/G setstereo: 1 msp3400: setvolume: 65535:65535 0x73 0x00 msp3400: thread: sleep msp3400: thread: wakeup msp3400: stereo detect register: -16 msp3400: thread: sleep msp3400: thread: wakeup msp3400: stereo detect register: -16 msp3400: thread: sleep msp3400: setvolume: 65535:65535 0x73 0x00 msp3400: setbass: 32768 0x00 msp3400: settreble: 32768 0x00 msp3400: thread: wakeup msp3400: stereo detect register: -16 msp3400: thread: sleep msp3400: thread: wakeup msp3400: stereo detect register: -16 msp3400: thread: sleep msp3400: thread: wakeup msp3400: stereo detect register: -16 msp3400: thread: sleep msp3400: thread: wakeup msp3400: stereo detect register: -16 msp3400: thread: sleep msp3400: thread: wakeup msp3400: stereo detect register: -16 msp3400: thread: sleep----Phil
On 26-Jul-98 Gerd Knorr wrote: > In lists.linux.kernel you write: > >>Hello, > >>I have a newer Hauppauge WinTV card (2 actually, models 400 and 401) which >>both >>have a Bt878 chip, Philips NTSC tuner, MSP3430G-A1. Video card is and ATI >>3DXpression+ PC2TV with 4MB SGRAM. > >>I am currently using XawTV 2.18 and the experimental drivers included with >>it. >>The more standard BTTV drivers under 2.0.35 cause i2c i/o errors and the >>tuner >>can't change channels or fine adjust. > >>The experimental drivers under 2.1.111 have no problems with i2c. The >>problem >>that I have is that the picture comes in just fine, but the sound is off by >>about +17 fine adjustments. :( My hunch is that the Philips tuner on the >>newer cards are somehow not completely supported, but are very close. If >>anyone has any ideas, patches, or suggestions, it would be of great help. =) >>Just getting it on channel 4 with the sound sort of aligned would be great, >>as >>the cable box will do the rest. :) > >>And the resulting kernel messages... > > [ ... ] > > Again please, and insmod both tuner and msp3400 module with "debug=1" > > Gerd > > -- > Gerd Knorr <kraxel@cs.tu-berlin.de>
--------------------------------------------------- E-Mail: Phillip K. Hornung <redx@pknet.com> Web: http://www.pknet.com/ ICQ: 2392585 Address: PSC Box 4074 Beale AFB, CA 95903 Phone: (530) 788-2346 Date: 26-Jul-98 Time: 10:25:12
Never eat more than you can lift. -- Miss Piggy
This message was sent by XFMail 1.3 (Linux 2.0.34 i586) ---------------------------------------------------
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html