I have two SMP Machines. One is only 166MHz and the other is 266MHz.
They both have identical Buslogic Controllers, hard disks, and tape
drives. The tape drives are Exabyte EXB-8505 drives that have internal
compression.
The drive on the 266MHz machine will start to record, then lock up the
SCSI bus a few minutes into a backup. The BusLogic controller software
does its best to reset everything, however, since the 'tar' process
goes into the 'down' state, it can't be killed so the tape-write
commands keep piling up, the BusLogic Controller Software keeps, aborting,
resetting, retrying, etc., <forever>. The result is the need for the
boot-switch.
I modified st_options.h to prevent queued commands, etc., this did not
fix anything. A temporary hack is to add udelay(60000) ahead of the
scsi write command (hey I need a backup...). However, I can't read
the resulting tape if I ever need to do so.
Is there any fix?
Info.. I tried to edit out a lot of non-pertainent stuff, but editing
over PPP with the _awful_ 3 to 20 second pauses is the pits. Hopefully
sobody will fix this sometime.
Jul 23 14:50:59 bombserver kernel: klogd 1.3-0, log source = /proc/kmsg started.
Jul 23 14:51:00 bombserver kernel: Loaded 6728 symbols from /System.map.
Jul 23 14:51:00 bombserver kernel: Symbols match kernel version.
Jul 23 14:51:00 bombserver kernel: Linux version 2.1.108 (root@boneserver) (gcc version 2.7.2) #2 SMP Tue Jul 14 12:06:56 EDT 1998
Jul 23 14:51:00 bombserver kernel: Intel MultiProcessor Specification v1.1
Jul 23 14:51:00 bombserver kernel: Virtual Wire compatibility mode.
Jul 23 14:51:00 bombserver kernel: OEM ID: INTEL Product ID: 440LX APIC at: 0xFEE00000
Jul 23 14:51:00 bombserver kernel: Processor #0 Pentium(tm) Pro APIC version 17
Jul 23 14:51:00 bombserver kernel: Processor #1 Pentium(tm) Pro APIC version 17
Jul 23 14:51:00 bombserver kernel: I/O APIC #2 Version 17 at 0xFEC00000.
Jul 23 14:51:00 bombserver kernel: Processors: 2
Jul 23 14:51:00 bombserver kernel: PIRQ redirection SETUP, working around broken MP-BIOS.
Jul 23 14:51:00 bombserver kernel: ... PIRQ0 -> IRQ 0
Jul 23 14:51:00 bombserver kernel: Console: colour VGA+ 80x25
Jul 23 14:51:00 bombserver kernel: Calibrating delay loop... 265.42 BogoMIPS
Jul 23 14:51:00 bombserver kernel: Memory: 127624k/131072k available (1136k kernel code, 400k reserved, 1868k data, 44k init)
Jul 23 14:51:00 bombserver kernel: Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Jul 23 14:51:00 bombserver kernel: Checking 'hlt' instruction... OK.
Jul 23 14:51:00 bombserver kernel: POSIX conformance testing by UNIFIX
Jul 23 14:51:00 bombserver kernel: CPU0: Intel Pentium II (Klamath) stepping 03
Jul 23 14:51:00 bombserver kernel: calibrating APIC timer ...
Jul 23 14:51:00 bombserver kernel: ..... CPU clock speed is 266.4630 MHz.
Jul 23 14:51:00 bombserver kernel: ..... APIC bus clock speed is 66.6155 MHz.
Jul 23 14:51:00 bombserver kernel: Booting processor 1 eip 2000
Jul 23 14:51:00 bombserver kernel: Calibrating delay loop... 266.24 BogoMIPS
Jul 23 14:51:00 bombserver kernel: OK.
Jul 23 14:51:00 bombserver kernel: CPU1: Intel Pentium II (Klamath) stepping 03
Jul 23 14:51:00 bombserver kernel: Total of 2 processors activated (531.66 BogoMIPS).
Jul 23 14:51:00 bombserver kernel: enabling symmetric IO mode... ...done.
Jul 23 14:51:00 bombserver kernel: ENABLING IO-APIC IRQs
Jul 23 14:51:00 bombserver kernel: init IO_APIC IRQs
Jul 23 14:51:00 bombserver kernel: IO-APIC pin 0, 9, 10, 11, 17, 20, 21, 22, 23 not connected.
Jul 23 14:51:00 bombserver kernel: ..MP-BIOS bug: 8254 timer not connected to IO-APIC
Jul 23 14:51:00 bombserver kernel: ...trying to set up timer as ExtINT... .. (found pin 0) ... works.
Jul 23 14:51:00 bombserver kernel: number of MP IRQ sources: 17.
Jul 23 14:51:00 bombserver kernel: number of IO-APIC registers: 24.
Jul 23 14:51:00 bombserver kernel: testing the IO APIC.......................
Jul 23 14:51:00 bombserver kernel: .... register #00: 02000000
Jul 23 14:51:00 bombserver kernel: ....... : physical APIC id: 02
Jul 23 14:51:00 bombserver kernel: .... register #01: 00170011
Jul 23 14:51:00 bombserver kernel: ....... : max redirection entries: 0017
Jul 23 14:51:00 bombserver kernel: ....... : IO APIC version: 0011
Jul 23 14:51:00 bombserver kernel: .... register #02: 04000000
Jul 23 14:51:00 bombserver kernel: ....... : arbitration: 04
Jul 23 14:51:00 bombserver kernel: .... IRQ redirection table:
Jul 23 14:51:00 bombserver kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
Jul 23 14:51:00 bombserver kernel: 00 001 01 0 0 0 0 0 1 7 51
Jul 23 14:51:00 bombserver kernel: 01 0FF 0F 0 0 0 0 0 1 1 59
Jul 23 14:51:00 bombserver kernel: 02 0FF 0F 0 0 0 0 0 1 1 51
Jul 23 14:51:00 bombserver kernel: 03 0FF 0F 0 0 0 0 0 1 1 69
Jul 23 14:51:00 bombserver kernel: 04 0FF 0F 0 0 0 0 0 1 1 71
Jul 23 14:51:00 bombserver kernel: 05 0FF 0F 0 0 0 0 0 1 1 79
Jul 23 14:51:00 bombserver kernel: 06 0FF 0F 0 0 0 0 0 1 1 81
Jul 23 14:51:00 bombserver kernel: 07 0FF 0F 0 0 0 0 0 1 1 89
Jul 23 14:51:00 bombserver kernel: 08 0FF 0F 0 0 0 0 0 1 1 91
Jul 23 14:51:00 bombserver kernel: 09 000 00 1 0 0 0 0 0 0 00
Jul 23 14:51:00 bombserver kernel: 0a 000 00 1 0 0 0 0 0 0 00
Jul 23 14:51:00 bombserver kernel: 0b 000 00 1 0 0 0 0 0 0 00
Jul 23 14:51:00 bombserver kernel: 0c 0FF 0F 0 0 0 0 0 1 1 B1
Jul 23 14:51:00 bombserver kernel: 0d 000 00 1 0 0 0 0 0 0 00
Jul 23 14:51:00 bombserver kernel: 0e 0FF 0F 0 0 0 0 0 1 1 C1
Jul 23 14:51:00 bombserver kernel: 0f 0FF 0F 0 0 0 0 0 1 1 C9
Jul 23 14:51:00 bombserver kernel: 10 0FF 0F 0 1 0 1 0 1 1 A1
Jul 23 14:51:00 bombserver kernel: 11 000 00 1 0 0 0 0 0 0 00
Jul 23 14:51:00 bombserver kernel: 12 0FF 0F 0 1 0 1 0 1 1 A9
Jul 23 14:51:00 bombserver kernel: 13 0FF 0F 0 1 0 1 0 1 1 99
Jul 23 14:51:00 bombserver kernel: 14 000 00 1 0 0 0 0 0 0 00
Jul 23 14:51:00 bombserver kernel: 15 000 00 1 0 0 0 0 0 0 00
Jul 23 14:51:00 bombserver kernel: 16 000 00 1 0 0 0 0 0 0 00
Jul 23 14:51:00 bombserver kernel: 17 000 00 1 0 0 0 0 0 0 00
Jul 23 14:51:00 bombserver kernel: IRQ to pin mappings:
Jul 23 14:51:00 bombserver kernel: 0->2 1->1 2->-1 3->3 4->4 5->5 6->6 7->7 8->8 9->19 10->16 11->18 12->12 13->13 14->14 15->15 16->-1 17->-1 18->-1 19->-1 20->-1 21->-1 22->-1 23->-1
Jul 23 14:51:00 bombserver kernel: .................................... done.
Jul 23 14:51:00 bombserver kernel: Swansea University Computer Society NET3.039 for Linux 2.1
Jul 23 14:51:00 bombserver kernel: NET3: Unix domain sockets 0.16 for Linux NET3.038.
Jul 23 14:51:00 bombserver kernel: Swansea University Computer Society TCP/IP for NET3.037
Jul 23 14:51:00 bombserver kernel: IP Protocols: ICMP, UDP, TCP
Jul 23 14:51:00 bombserver kernel: Initializing RT netlink socket
Jul 23 14:51:00 bombserver kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdb91
Jul 23 14:51:00 bombserver kernel: PCI: Using configuration type 1
Jul 23 14:51:00 bombserver kernel: PCI: Probing PCI hardware
Jul 23 14:51:00 bombserver kernel: PCI: Enabling I/O for device 00:3a
Jul 23 14:51:00 bombserver kernel: Starting kswapd v 1.5
Jul 23 14:51:00 bombserver kernel: Serial driver version 4.26 with no serial options enabled
Jul 23 14:51:00 bombserver kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Jul 23 14:51:00 bombserver kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Jul 23 14:51:00 bombserver kernel: Floppy drive(s): fd0 is 1.44M
Jul 23 14:51:00 bombserver kernel: FDC 0 is a National Semiconductor PC87306
Jul 23 14:51:00 bombserver kernel: scsi: ***** BusLogic SCSI Driver Version 2.1.13 of 17 April 1998 *****
Jul 23 14:51:00 bombserver kernel: scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
Jul 23 14:51:00 bombserver kernel: scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
Jul 23 14:51:00 bombserver kernel: scsi0: Firmware Version: 5.07B, I/O Address: 0xEFF4, IRQ Channel: 10/Level
Jul 23 14:51:00 bombserver kernel: scsi0: PCI Bus: 0, Device: 11, Address: 0xFEBEF000, Host Adapter SCSI ID: 7
Jul 23 14:51:00 bombserver kernel: scsi0: Parity Checking: Enabled, Extended Translation: Enabled
Jul 23 14:51:00 bombserver kernel: scsi0: Synchronous Negotiation: Fast, Wide Negotiation: Enabled
Jul 23 14:51:00 bombserver kernel: scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
Jul 23 14:51:00 bombserver kernel: scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
Jul 23 14:51:00 bombserver kernel: scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192
Jul 23 14:51:00 bombserver kernel: scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
Jul 23 14:51:00 bombserver kernel: scsi0: Error Recovery Strategy: Default, SCSI Bus Reset: Enabled
Jul 23 14:51:00 bombserver kernel: scsi0: SCSI Bus Termination: High Enabled, SCAM: Disabled
Jul 23 14:51:00 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 23 14:51:00 bombserver kernel: scsi0 : BusLogic BT-958
Jul 23 14:51:00 bombserver kernel: scsi : 1 host.
Jul 23 14:51:00 bombserver kernel: Vendor: SEAGATE Model: ST32171W Rev: 0484
Jul 23 14:51:00 bombserver kernel: Type: Direct-Access ANSI SCSI revision: 02
Jul 23 14:51:00 bombserver kernel: Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Jul 23 14:51:00 bombserver kernel: Vendor: QUANTUM Model: VIKING 2.3 NSE Rev: 8808
Jul 23 14:51:00 bombserver kernel: Type: Direct-Access ANSI SCSI revision: 02
Jul 23 14:51:00 bombserver kernel: Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Jul 23 14:51:00 bombserver kernel: Vendor: QUANTUM Model: VIKING 2.3 NSE Rev: 8808
Jul 23 14:51:00 bombserver kernel: Type: Direct-Access ANSI SCSI revision: 02
Jul 23 14:51:00 bombserver kernel: Detected scsi disk sdc at scsi0, channel 0, id 2, lun 0
Jul 23 14:51:00 bombserver kernel: Vendor: NEC Model: CD-ROM DRIVE:464 Rev: 1.05
Jul 23 14:51:00 bombserver kernel: Type: CD-ROM ANSI SCSI revision: 02
Jul 23 14:51:00 bombserver kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Jul 23 14:51:00 bombserver kernel: scsi0: Target 0: Queue Depth 28, Wide Synchronous at 20.0 MB/sec, offset 15
Jul 23 14:51:00 bombserver kernel: scsi0: Target 1: Queue Depth 28, Synchronous at 10.0 MB/sec, offset 15
Jul 23 14:51:00 bombserver kernel: scsi0: Target 2: Queue Depth 28, Synchronous at 10.0 MB/sec, offset 15
Jul 23 14:51:00 bombserver kernel: scsi0: Target 3: Queue Depth 3, Synchronous at 10.0 MB/sec, offset 15
Jul 23 14:51:00 bombserver kernel: scsi : detected 1 SCSI cdrom 3 SCSI disks total.
Jul 23 14:51:00 bombserver kernel: Uniform CD-ROM driver Revision: 2.12
Jul 23 14:51:00 bombserver kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors= 4194057 [2047 MB] [2.0 GB]
Jul 23 14:51:00 bombserver kernel: SCSI device sdb: hdwr sector= 512 bytes. Sectors= 4446801 [2171 MB] [2.2 GB]
Jul 23 14:51:00 bombserver kernel: SCSI device sdc: hdwr sector= 512 bytes. Sectors= 4446801 [2171 MB] [2.2 GB]
Jul 23 14:51:00 bombserver kernel: PPP: version 2.3.3 (demand dialling)
Jul 23 14:51:00 bombserver kernel: TCP compression code copyright 1989 Regents of the University of California
Jul 23 14:51:00 bombserver kernel: PPP line discipline registered.
Jul 23 14:51:00 bombserver kernel: eth0: 3Com 3c905 Boomerang 100baseTx at 0xef00, 00:10:4b:2f:f8:40, IRQ 9
Jul 23 14:51:00 bombserver kernel: 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
Jul 23 14:51:00 bombserver kernel: eth0: MII transceiver found at address 24.
Jul 23 14:51:00 bombserver kernel: Enabling bus-master transmits and whole-frame receives.
Jul 23 14:51:00 bombserver kernel: 3c59x.c:v0.47H 12/4/97 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
Jul 23 14:51:00 bombserver kernel: Partition check:
Jul 23 14:51:00 bombserver kernel: sda: sda1 sda2 sda3
Jul 23 14:51:00 bombserver kernel: sdb: sdb1
Jul 23 14:51:00 bombserver kernel: sdc: sdc1
Jul 23 14:51:00 bombserver kernel: VFS: Mounted root (ext2 filesystem) readonly.
Jul 23 14:51:00 bombserver kernel: Freeing unused kernel memory: 44k freed
Jul 23 14:51:00 bombserver kernel: scsi0: Tagged Queuing now active for Target 0
Jul 23 14:51:00 bombserver kernel: Adding Swap: 128516k swap-space (priority -1)
Jul 23 14:51:00 bombserver kernel: scsi0: Tagged Queuing now active for Target 1
Jul 23 14:51:00 bombserver kernel: scsi0: Tagged Queuing now active for Target 2
Jul 23 16:11:43 bombserver kernel: scsi : aborting command due to timeout : pid 4058, scsi0, channel 0, id 0, lun 0 0x08 0b 82 77 08 00
Jul 23 16:11:43 bombserver kernel: scsi0: Aborting CCB #6019 to Target 0
Jul 23 16:11:43 bombserver kernel: SCSI host 0 abort (pid 4058) timed out - resetting
Jul 23 16:11:43 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:11:43 bombserver kernel: scsi0: Tagged Queuing now disabled for Target 0
Jul 23 16:11:43 bombserver kernel: scsi0: Sending Bus Device Reset CCB #6047 to Target 0
Jul 23 16:11:44 bombserver kernel: scsi : aborting command due to timeout : pid 4059, scsi0, channel 0, id 0, lun 0 0x0a 00 40 53 02 00
Jul 23 16:11:44 bombserver kernel: scsi0: Unable to Abort Command to Target 0 - CCB Reset
Jul 23 16:11:44 bombserver kernel: scsi : aborting command due to timeout : pid 4060, scsi0, channel 0, id 0, lun 0 0x0a 01 40 51 02 00
Jul 23 16:11:44 bombserver kernel: scsi0: Unable to Abort Command to Target 0 - CCB Reset
Jul 23 16:11:44 bombserver kernel: scsi : aborting command due to timeout : pid 4061, scsi0, channel 0, id 0, lun 0 0x0a 01 40 5b 02 00
Jul 23 16:11:44 bombserver kernel: scsi0: Unable to Abort Command to Target 0 - CCB Reset
Jul 23 16:11:44 bombserver kernel: scsi : aborting command due to timeout : pid 4062, scsi0, channel 0, id 0, lun 0 0x0a 04 c0 b5 02 00
Jul 23 16:11:44 bombserver kernel: scsi0: Unable to Abort Command to Target 0 - CCB Reset
Jul 23 16:11:44 bombserver kernel: scsi : aborting command due to timeout : pid 4063, scsi0, channel 0, id 0, lun 0 0x0a 0d 00 4f 02 00
Jul 23 16:11:44 bombserver kernel: scsi0: Unable to Abort Command to Target 0 - CCB Reset
Jul 23 16:11:45 bombserver kernel: SCSI host 0 channel 0 reset (pid 4058) timed out - trying harder
Jul 23 16:11:45 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:11:45 bombserver kernel: scsi0: Resetting BusLogic BT-958 due to Target 0
Jul 23 16:11:45 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 23 16:12:04 bombserver kernel: scsi : aborting command due to timeout : pid 4136, scsi0, channel 0, id 0, lun 0 0x0a 00 34 ab 02 00
Jul 23 16:12:04 bombserver kernel: scsi0: Aborting CCB #6157 to Target 0
Jul 23 16:12:04 bombserver kernel: SCSI host 0 abort (pid 4136) timed out - resetting
Jul 23 16:12:04 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:12:04 bombserver kernel: scsi0: Sending Bus Device Reset CCB #6162 to Target 0
Jul 23 16:12:06 bombserver kernel: SCSI host 0 channel 0 reset (pid 4136) timed out - trying harder
Jul 23 16:12:06 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:12:06 bombserver kernel: scsi0: Resetting BusLogic BT-958 due to Target 0
Jul 23 16:12:06 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 23 16:12:09 bombserver kernel: st0: Error with sense data: extra data not valid Current error st09:00: sns = 70 6
Jul 23 16:12:09 bombserver kernel: ASC=29 ASCQ= 0
Jul 23 16:12:09 bombserver kernel: Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x29 0x00 0x00 0x00
Jul 23 16:12:59 bombserver kernel: scsi : aborting command due to timeout : pid 4390, scsi0, channel 0, id 0, lun 0 0x0a 00 40 55 02 00
Jul 23 16:12:59 bombserver kernel: scsi0: Aborting CCB #6616 to Target 0
Jul 23 16:12:59 bombserver kernel: scsi : aborting command due to timeout : pid 4391, scsi0, channel 0, id 0, lun 0 0x0a 00 c0 d1 02 00
Jul 23 16:12:59 bombserver kernel: scsi0: Aborting CCB #6617 to Target 0
Jul 23 16:12:59 bombserver kernel: scsi : aborting command due to timeout : pid 4392, scsi0, channel 0, id 0, lun 0 0x0a 01 40 5b 02 00
Jul 23 16:12:59 bombserver kernel: scsi0: Aborting CCB #6618 to Target 0
Jul 23 16:12:59 bombserver kernel: scsi : aborting command due to timeout : pid 4393, scsi0, channel 0, id 0, lun 0 0x0a 0d 00 4f 02 00
Jul 23 16:12:59 bombserver kernel: scsi0: Aborting CCB #6619 to Target 0
Jul 23 16:12:59 bombserver kernel: scsi : aborting command due to timeout : pid 4394, scsi0, channel 0, id 0, lun 0 0x0a 0d 00 55 02 00
Jul 23 16:12:59 bombserver kernel: scsi0: Aborting CCB #6620 to Target 0
Jul 23 16:12:59 bombserver kernel: SCSI host 0 abort (pid 4391) timed out - resetting
Jul 23 16:12:59 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:12:59 bombserver kernel: scsi0: Sending Bus Device Reset CCB #6622 to Target 0
Jul 23 16:12:59 bombserver kernel: SCSI host 0 abort (pid 4390) timed out - resetting
Jul 23 16:12:59 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:12:59 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 23 16:12:59 bombserver kernel: SCSI host 0 abort (pid 4392) timed out - resetting
Jul 23 16:12:59 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:12:59 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 23 16:12:59 bombserver kernel: SCSI host 0 abort (pid 4393) timed out - resetting
Jul 23 16:12:59 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:12:59 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 23 16:12:59 bombserver kernel: SCSI host 0 abort (pid 4394) timed out - resetting
Jul 23 16:12:59 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:12:59 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 23 16:13:01 bombserver kernel: SCSI host 0 channel 0 reset (pid 4390) timed out - trying harder
Jul 23 16:13:01 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:13:01 bombserver kernel: scsi0: Resetting BusLogic BT-958 due to Target 0
Jul 23 16:13:01 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 23 16:13:19 bombserver kernel: SCSI host 0 abort (pid 4390) timed out - resetting
Jul 23 16:13:19 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:13:19 bombserver kernel: scsi0: Sending Bus Device Reset CCB #6636 to Target 0
Jul 23 16:13:19 bombserver kernel: scsi : aborting command due to timeout : pid 4396, scsi0, channel 0, id 0, lun 0 0x0a 00 34 af 04 00
Jul 23 16:13:19 bombserver kernel: scsi0: Unable to Abort Command to Target 0 - CCB Reset
Jul 23 16:13:19 bombserver kernel: scsi : aborting command due to timeout : pid 4397, scsi0, channel 0, id 0, lun 0 0x0a 0b 80 b1 02 00
Jul 23 16:13:19 bombserver kernel: scsi0: Unable to Abort Command to Target 0 - CCB Reset
Jul 23 16:13:19 bombserver kernel: scsi : aborting command due to timeout : pid 4398, scsi0, channel 0, id 0, lun 0 0x0a 1c 00 6b 02 00
Jul 23 16:13:19 bombserver kernel: scsi0: Unable to Abort Command to Target 0 - CCB Reset
Jul 23 16:13:20 bombserver kernel: SCSI host 0 channel 0 reset (pid 4390) timed out - trying harder
Jul 23 16:13:20 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:13:20 bombserver kernel: scsi0: Resetting BusLogic BT-958 due to Target 0
Jul 23 16:13:20 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 23 16:13:38 bombserver kernel: SCSI host 0 abort (pid 4390) timed out - resetting
Jul 23 16:13:38 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:13:38 bombserver kernel: scsi0: Sending Bus Device Reset CCB #6647 to Target 0
Jul 23 16:13:38 bombserver kernel: scsi : aborting command due to timeout : pid 4400, scsi0, channel 0, id 0, lun 0 0x0a 06 40 b3 02 00
Jul 23 16:13:38 bombserver kernel: scsi0: Unable to Abort Command to Target 0 - CCB Reset
Jul 23 16:13:40 bombserver kernel: SCSI host 0 abort (pid 4400) timed out - resetting
Jul 23 16:13:40 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:13:40 bombserver kernel: scsi0: Resetting BusLogic BT-958 due to Target 0
Jul 23 16:13:40 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 23 16:13:58 bombserver kernel: scsi : aborting command due to timeout : pid 4407, scsi0, channel 0, id 0, lun 0 0x0a 06 40 b5 02 00
Jul 23 16:13:58 bombserver kernel: scsi0: Aborting CCB #6663 to Target 0
Jul 23 16:13:58 bombserver kernel: SCSI host 0 abort (pid 4407) timed out - resetting
Jul 23 16:13:58 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:13:58 bombserver kernel: scsi0: Sending Bus Device Reset CCB #6665 to Target 0
Jul 23 16:14:01 bombserver kernel: SCSI host 0 channel 0 reset (pid 4407) timed out - trying harder
Jul 23 16:14:01 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:14:01 bombserver kernel: scsi0: Resetting BusLogic BT-958 due to Target 0
Jul 23 16:14:01 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 23 16:14:18 bombserver kernel: scsi : aborting command due to timeout : pid 4432, scsi0, channel 0, id 0, lun 0 0x0a 06 40 b5 02 00
Jul 23 16:14:18 bombserver kernel: scsi0: Aborting CCB #6711 to Target 0
Jul 23 16:14:19 bombserver kernel: SCSI host 0 abort (pid 4432) timed out - resetting
Jul 23 16:14:19 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:14:19 bombserver kernel: scsi0: Sending Bus Device Reset CCB #6713 to Target 0
Jul 23 16:14:20 bombserver kernel: SCSI host 0 channel 0 reset (pid 4432) timed out - trying harder
Jul 23 16:14:21 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:14:21 bombserver kernel: scsi0: Resetting BusLogic BT-958 due to Target 0
Jul 23 16:14:21 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 23 16:14:38 bombserver kernel: scsi : aborting command due to timeout : pid 4434, scsi0, channel 0, id 0, lun 0 0x0a 06 40 b3 02 00
Jul 23 16:14:38 bombserver kernel: scsi0: Aborting CCB #6718 to Target 0
Jul 23 16:14:38 bombserver kernel: scsi0: CCB #6718 to Target 0 Aborted
Jul 23 16:19:11 bombserver kernel: scsi : aborting command due to timeout : pid 5134, scsi0, channel 0, id 0, lun 0 0x08 0a 11 d7 1a 00
Jul 23 16:19:11 bombserver kernel: scsi0: Aborting CCB #7421 to Target 0
Jul 23 16:19:11 bombserver kernel: SCSI host 0 abort (pid 5134) timed out - resetting
Jul 23 16:19:11 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:19:11 bombserver kernel: scsi0: Sending Bus Device Reset CCB #7449 to Target 0
Jul 23 16:19:13 bombserver kernel: SCSI host 0 channel 0 reset (pid 5134) timed out - trying harder
Jul 23 16:19:13 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:19:13 bombserver kernel: scsi0: Resetting BusLogic BT-958 due to Target 0
Jul 23 16:19:13 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 23 16:19:32 bombserver kernel: scsi : aborting command due to timeout : pid 5200, scsi0, channel 0, id 0, lun 0 0x0a 00 34 ed 02 00
Jul 23 16:19:32 bombserver kernel: scsi0: Aborting CCB #7541 to Target 0
Jul 23 16:19:32 bombserver kernel: SCSI host 0 abort (pid 5200) timed out - resetting
Jul 23 16:19:32 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:19:32 bombserver kernel: scsi0: Sending Bus Device Reset CCB #7550 to Target 0
Jul 23 16:19:34 bombserver kernel: SCSI host 0 channel 0 reset (pid 5200) timed out - trying harder
Jul 23 16:19:34 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:19:34 bombserver kernel: scsi0: Resetting BusLogic BT-958 due to Target 0
Jul 23 16:19:34 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 23 16:19:37 bombserver kernel: st0: Error with sense data: extra data not valid Current error st09:00: sns = 70 6
Jul 23 16:19:37 bombserver kernel: ASC=29 ASCQ= 0
Jul 23 16:19:37 bombserver kernel: Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x29 0x00 0x00 0x00
Jul 23 16:21:30 bombserver kernel: st0: Error with sense data: extra data not valid EOM Current error st09:00: sns = 70 45
Jul 23 16:21:30 bombserver kernel: ASC=26 ASCQ= 0
Jul 23 16:21:30 bombserver kernel: Raw sense data:0x70 0x00 0x45 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x26 0x00 0x00 0x00
Jul 23 16:21:34 bombserver kernel: st0: Error with sense data: extra data not valid EOM Current error st09:00: sns = 70 45
Jul 23 16:21:34 bombserver kernel: ASC=26 ASCQ= 0
Jul 23 16:21:34 bombserver kernel: Raw sense data:0x70 0x00 0x45 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x26 0x00 0x00 0x00
Jul 23 16:21:36 bombserver kernel: st0: Error with sense data: extra data not valid EOM Current error st09:00: sns = 70 45
Jul 23 16:21:36 bombserver kernel: ASC=26 ASCQ= 0
Jul 23 16:21:36 bombserver kernel: Raw sense data:0x70 0x00 0x45 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x26 0x00 0x00 0x00
Jul 23 16:21:38 bombserver kernel: st0: Error with sense data: extra data not valid EOM Current error st09:00: sns = 70 45
Jul 23 16:21:38 bombserver kernel: ASC=26 ASCQ= 0
Jul 23 16:21:38 bombserver kernel: Raw sense data:0x70 0x00 0x45 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x26 0x00 0x00 0x00
Jul 23 16:21:41 bombserver kernel: st0: Error with sense data: extra data not valid EOM Current error st09:00: sns = 70 45
Jul 23 16:21:41 bombserver kernel: ASC=26 ASCQ= 0
Jul 23 16:21:41 bombserver kernel: Raw sense data:0x70 0x00 0x45 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x26 0x00 0x00 0x00
Jul 23 16:21:44 bombserver kernel: st0: Error with sense data: extra data not valid EOM Current error st09:00: sns = 70 45
Jul 23 16:21:44 bombserver kernel: ASC=26 ASCQ= 0
Jul 23 16:21:44 bombserver kernel: Raw sense data:0x70 0x00 0x45 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x26 0x00 0x00 0x00
Jul 23 16:21:47 bombserver kernel: st0: Error with sense data: extra data not valid EOM Current error st09:00: sns = 70 45
Jul 23 16:21:47 bombserver kernel: ASC=26 ASCQ= 0
Jul 23 16:21:47 bombserver kernel: Raw sense data:0x70 0x00 0x45 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x26 0x00 0x00 0x00
Jul 23 16:21:51 bombserver kernel: st0: Error with sense data: extra data not valid EOM Current error st09:00: sns = 70 45
Jul 23 16:21:51 bombserver kernel: ASC=26 ASCQ= 0
Jul 23 16:21:51 bombserver kernel: Raw sense data:0x70 0x00 0x45 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x26 0x00 0x00 0x00
Jul 23 16:21:54 bombserver kernel: st0: Error with sense data: extra data not valid EOM Current error st09:00: sns = 70 45
Jul 23 16:21:54 bombserver kernel: ASC=26 ASCQ= 0
Jul 23 16:21:54 bombserver kernel: Raw sense data:0x70 0x00 0x45 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x26 0x00 0x00 0x00
Jul 23 16:21:56 bombserver kernel: st0: Error with sense data: extra data not valid EOM Current error st09:00: sns = 70 45
Jul 23 16:21:56 bombserver kernel: ASC=26 ASCQ= 0
Jul 23 16:21:56 bombserver kernel: Raw sense data:0x70 0x00 0x45 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x26 0x00 0x00 0x00
Jul 23 16:21:58 bombserver kernel: st0: Error with sense data: extra data not valid EOM Current error st09:00: sns = 70 45
Jul 23 16:21:58 bombserver kernel: ASC=26 ASCQ= 0
Jul 23 16:21:58 bombserver kernel: Raw sense data:0x70 0x00 0x45 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x26 0x00 0x00 0x00
Jul 23 16:22:01 bombserver kernel: st0: Error with sense data: extra data not valid EOM Current error st09:00: sns = 70 45
Jul 23 16:22:01 bombserver kernel: ASC=26 ASCQ= 0
Jul 23 16:22:01 bombserver kernel: Raw sense data:0x70 0x00 0x45 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x26 0x00 0x00 0x00
Jul 23 16:25:15 bombserver kernel: scsi : aborting command due to timeout : pid 8498, scsi0, channel 0, id 0, lun 0 0x08 0a 96 35 8a 00
Jul 23 16:25:15 bombserver kernel: scsi0: Aborting CCB #11325 to Target 0
Jul 23 16:25:15 bombserver kernel: SCSI host 0 abort (pid 8498) timed out - resetting
Jul 23 16:25:15 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:25:15 bombserver kernel: scsi0: Sending Bus Device Reset CCB #11333 to Target 0
Jul 23 16:25:17 bombserver kernel: SCSI host 0 channel 0 reset (pid 8498) timed out - trying harder
Jul 23 16:25:17 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:25:17 bombserver kernel: scsi0: Resetting BusLogic BT-958 due to Target 0
Jul 23 16:25:17 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 23 16:25:20 bombserver kernel: st0: Error with sense data: extra data not valid Current error st09:00: sns = 70 6
Jul 23 16:25:20 bombserver kernel: ASC=29 ASCQ= 0
Jul 23 16:25:20 bombserver kernel: Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x29 0x00 0x00 0x00
Jul 23 16:25:35 bombserver kernel: scsi : aborting command due to timeout : pid 8529, scsi0, channel 0, id 0, lun 0 0x0a 00 35 37 02 00
Jul 23 16:25:35 bombserver kernel: scsi0: Aborting CCB #11381 to Target 0
Jul 23 16:25:36 bombserver kernel: SCSI host 0 abort (pid 8529) timed out - resetting
Jul 23 16:25:36 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:25:36 bombserver kernel: scsi0: Sending Bus Device Reset CCB #11390 to Target 0
Jul 23 16:25:38 bombserver kernel: SCSI host 0 channel 0 reset (pid 8529) timed out - trying harder
Jul 23 16:25:38 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:25:38 bombserver kernel: scsi0: Resetting BusLogic BT-958 due to Target 0
Jul 23 16:25:38 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 23 16:25:39 bombserver kernel: st0: Error with sense data: extra data not valid Current error st09:00: sns = 70 6
Jul 23 16:25:39 bombserver kernel: ASC=29 ASCQ= 0
Jul 23 16:25:39 bombserver kernel: Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x29 0x00 0x00 0x00
Jul 23 16:29:46 bombserver kernel: scsi : aborting command due to timeout : pid 9951, scsi0, channel 0, id 0, lun 0 0x08 0c ab 5f 98 00
Jul 23 16:29:46 bombserver kernel: scsi0: Aborting CCB #12815 to Target 0
Jul 23 16:29:46 bombserver kernel: SCSI host 0 abort (pid 9951) timed out - resetting
Jul 23 16:29:46 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:29:46 bombserver kernel: scsi0: Sending Bus Device Reset CCB #12820 to Target 0
Jul 23 16:29:48 bombserver kernel: SCSI host 0 channel 0 reset (pid 9951) timed out - trying harder
Jul 23 16:29:48 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:29:48 bombserver kernel: scsi0: Resetting BusLogic BT-958 due to Target 0
Jul 23 16:29:48 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 23 16:29:51 bombserver kernel: st0: Error with sense data: extra data not valid Current error st09:00: sns = 70 6
Jul 23 16:29:51 bombserver kernel: ASC=29 ASCQ= 0
Jul 23 16:29:51 bombserver kernel: Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x29 0x00 0x00 0x00
Jul 23 16:30:06 bombserver kernel: scsi : aborting command due to timeout : pid 9982, scsi0, channel 0, id 0, lun 0 0x0a 00 35 2d 02 00
Jul 23 16:30:06 bombserver kernel: scsi0: Aborting CCB #12870 to Target 0
Jul 23 16:30:07 bombserver kernel: SCSI host 0 abort (pid 9982) timed out - resetting
Jul 23 16:30:07 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:30:07 bombserver kernel: scsi0: Sending Bus Device Reset CCB #12876 to Target 0
Jul 23 16:30:08 bombserver kernel: SCSI host 0 channel 0 reset (pid 9982) timed out - trying harder
Jul 23 16:30:08 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:30:08 bombserver kernel: scsi0: Resetting BusLogic BT-958 due to Target 0
Jul 23 16:30:08 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 23 16:30:13 bombserver kernel: st0: Error with sense data: extra data not valid Current error st09:00: sns = 70 6
Jul 23 16:30:13 bombserver kernel: ASC=29 ASCQ= 0
Jul 23 16:30:13 bombserver kernel: Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x29 0x00 0x00 0x00
Jul 23 16:40:38 bombserver kernel: scsi : aborting command due to timeout : pid 10825, scsi0, channel 0, id 0, lun 0 0x0a 0d 00 4f 02 00
Jul 23 16:40:38 bombserver kernel: scsi0: Aborting CCB #15386 to Target 0
Jul 23 16:40:38 bombserver kernel: scsi : aborting command due to timeout : pid 10826, scsi0, channel 0, id 0, lun 0 0x0a 0d 00 55 02 00
Jul 23 16:40:38 bombserver kernel: scsi0: Aborting CCB #15387 to Target 0
Jul 23 16:40:38 bombserver kernel: scsi : aborting command due to timeout : pid 10827, scsi0, channel 0, id 0, lun 0 0x0a 0f c0 4f 02 00
Jul 23 16:40:38 bombserver kernel: scsi0: Aborting CCB #15388 to Target 0
Jul 23 16:40:38 bombserver kernel: scsi : aborting command due to timeout : pid 10828, scsi0, channel 0, id 0, lun 0 0x0a 0f c0 57 1e 00
Jul 23 16:40:38 bombserver kernel: scsi0: Aborting CCB #15389 to Target 0
Jul 23 16:40:38 bombserver kernel: scsi : aborting command due to timeout : pid 10829, scsi0, channel 0, id 0, lun 0 0x0a 10 00 53 02 00
Jul 23 16:40:38 bombserver kernel: scsi0: Aborting CCB #15390 to Target 0
Jul 23 16:40:38 bombserver kernel: scsi : aborting command due to timeout : pid 10830, scsi0, channel 0, id 0, lun 0 0x0a 10 00 8f 04 00
Jul 23 16:40:38 bombserver kernel: scsi0: Aborting CCB #15391 to Target 0
Jul 23 16:40:38 bombserver kernel: scsi : aborting command due to timeout : pid 10831, scsi0, channel 0, id 0, lun 0 0x0a 16 40 4f 02 00
Jul 23 16:40:38 bombserver kernel: scsi0: Aborting CCB #15392 to Target 0
Jul 23 16:40:38 bombserver kernel: scsi : aborting command due to timeout : pid 10832, scsi0, channel 0, id 0, lun 0 0x0a 16 40 b3 04 00
Jul 23 16:40:38 bombserver kernel: scsi0: Aborting CCB #15393 to Target 0
Jul 23 16:40:38 bombserver kernel: scsi : aborting command due to timeout : pid 10833, scsi0, channel 0, id 0, lun 0 0x0a 19 c0 7d 04 00
Jul 23 16:40:38 bombserver kernel: scsi0: Aborting CCB #15394 to Target 0
Jul 23 16:40:38 bombserver kernel: scsi : aborting command due to timeout : pid 10834, scsi0, channel 0, id 0, lun 0 0x0a 1b 40 b3 04 00
Jul 23 16:40:38 bombserver kernel: scsi0: Aborting CCB #15395 to Target 0
Jul 23 16:40:39 bombserver kernel: SCSI host 0 abort (pid 10826) timed out - resetting
Jul 23 16:40:39 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:40:39 bombserver kernel: scsi0: Sending Bus Device Reset CCB #15407 to Target 0
Jul 23 16:40:39 bombserver kernel: SCSI host 0 abort (pid 10825) timed out - resetting
Jul 23 16:40:39 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:40:39 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 23 16:40:39 bombserver kernel: SCSI host 0 abort (pid 10827) timed out - resetting
Jul 23 16:40:39 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:40:39 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 23 16:40:39 bombserver kernel: SCSI host 0 abort (pid 10828) timed out - resetting
Jul 23 16:40:39 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:40:39 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 23 16:40:39 bombserver kernel: SCSI host 0 abort (pid 10830) timed out - resetting
Jul 23 16:40:39 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:40:39 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 23 16:40:39 bombserver kernel: SCSI host 0 abort (pid 10829) timed out - resetting
Jul 23 16:40:39 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:40:39 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 23 16:40:39 bombserver kernel: SCSI host 0 abort (pid 10831) timed out - resetting
Jul 23 16:40:39 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:40:39 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 23 16:40:39 bombserver kernel: SCSI host 0 abort (pid 10832) timed out - resetting
Jul 23 16:40:39 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:40:39 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 23 16:40:39 bombserver kernel: SCSI host 0 abort (pid 10834) timed out - resetting
Jul 23 16:40:39 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:40:39 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 23 16:40:39 bombserver kernel: SCSI host 0 abort (pid 10833) timed out - resetting
Jul 23 16:40:39 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:40:39 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 23 16:40:40 bombserver kernel: SCSI host 0 channel 0 reset (pid 10825) timed out - trying harder
Jul 23 16:40:40 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 23 16:40:40 bombserver kernel: scsi0: Resetting BusLogic BT-958 due to Target 0
Jul 23 16:40:40 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 23 16:40:43 bombserver kernel: st0: Error with sense data: extra data not valid Current error st09:00: sns = 70 6
Jul 23 16:40:43 bombserver kernel: ASC=29 ASCQ= 0
Jul 23 16:40:43 bombserver kernel: Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x29 0x00 0x00 0x00
Installed new tape drive, swapped BusLogic controller.....
Jul 24 16:08:03 bombserver kernel: scsi0: Aborting CCB #47804 to Target 0
Jul 24 16:08:03 bombserver kernel: scsi : aborting command due to timeout : pid 46332, scsi0, channel 0, id 0, lun 0 0x0a 10 00 4f 1a 00
Jul 24 16:08:03 bombserver kernel: scsi0: Aborting CCB #47805 to Target 0
Jul 24 16:08:03 bombserver kernel: scsi : aborting command due to timeout : pid 46333, scsi0, channel 0, id 0, lun 0 0x0a 10 c0 bb 04 00
Jul 24 16:08:03 bombserver kernel: scsi0: Aborting CCB #47806 to Target 0
Jul 24 16:08:03 bombserver kernel: scsi : aborting command due to timeout : pid 46334, scsi0, channel 0, id 0, lun 0 0x0a 1b 80 bd 06 00
Jul 24 16:08:03 bombserver kernel: scsi0: Aborting CCB #47807 to Target 0
Jul 24 16:08:03 bombserver kernel: scsi : aborting command due to timeout : pid 46335, scsi0, channel 0, id 0, lun 0 0x0a 1c c0 bb 02 00
Jul 24 16:08:03 bombserver kernel: scsi0: Aborting CCB #47808 to Target 0
Jul 24 16:08:03 bombserver kernel: scsi : aborting command due to timeout : pid 46336, scsi0, channel 0, id 0, lun 0 0x08 0a a2 61 14 00
Jul 24 16:08:03 bombserver kernel: scsi0: Aborting CCB #47809 to Target 0
Jul 24 16:08:03 bombserver kernel: scsi : aborting command due to timeout : pid 46337, scsi0, channel 0, id 0, lun 0 0x08 0a a2 77 1c 00
Jul 24 16:08:03 bombserver kernel: scsi0: Aborting CCB #47810 to Target 0
Jul 24 16:08:03 bombserver kernel: SCSI host 0 abort (pid 46329) timed out - resetting
Jul 24 16:08:03 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 24 16:08:03 bombserver kernel: scsi0: Sending Bus Device Reset CCB #47818 to Target 0
Jul 24 16:08:03 bombserver kernel: SCSI host 0 abort (pid 46328) timed out - resetting
Jul 24 16:08:03 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 24 16:08:03 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 24 16:08:03 bombserver kernel: SCSI host 0 abort (pid 46330) timed out - resetting
Jul 24 16:08:03 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 24 16:08:03 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 24 16:08:03 bombserver kernel: SCSI host 0 abort (pid 46332) timed out - resetting
Jul 24 16:08:03 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 24 16:08:03 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 24 16:08:03 bombserver kernel: SCSI host 0 abort (pid 46331) timed out - resetting
Jul 24 16:08:03 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 24 16:08:03 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 24 16:08:03 bombserver kernel: SCSI host 0 abort (pid 46333) timed out - resetting
Jul 24 16:08:03 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 24 16:08:03 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 24 16:08:03 bombserver kernel: SCSI host 0 abort (pid 46334) timed out - resetting
Jul 24 16:08:03 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 24 16:08:03 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 24 16:08:03 bombserver kernel: SCSI host 0 abort (pid 46336) timed out - resetting
Jul 24 16:08:03 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 24 16:08:03 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 24 16:08:03 bombserver kernel: SCSI host 0 abort (pid 46335) timed out - resetting
Jul 24 16:08:03 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 24 16:08:03 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 24 16:08:03 bombserver kernel: SCSI host 0 abort (pid 46337) timed out - resetting
Jul 24 16:08:03 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 24 16:08:03 bombserver kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending
Jul 24 16:08:05 bombserver kernel: SCSI host 0 channel 0 reset (pid 46328) timed out - trying harder
Jul 24 16:08:05 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 24 16:08:05 bombserver kernel: scsi0: Resetting BusLogic BT-958 due to Target 0
Jul 24 16:08:05 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 24 16:08:08 bombserver kernel: st0: Error with sense data: extra data not valid Current error st09:00: sns = 70 6
Jul 24 16:08:08 bombserver kernel: ASC=29 ASCQ= 0
Jul 24 16:08:08 bombserver kernel: Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x29 0x00 0x00 0x00
Jul 24 16:08:24 bombserver kernel: scsi : aborting command due to timeout : pid 46434, scsi0, channel 0, id 0, lun 0 0x0a 06 40 b5 02 00
Jul 24 16:08:24 bombserver kernel: scsi0: Aborting CCB #47982 to Target 0
Jul 24 16:08:25 bombserver kernel: SCSI host 0 abort (pid 46434) timed out - resetting
Jul 24 16:08:25 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 24 16:08:25 bombserver kernel: scsi0: Sending Bus Device Reset CCB #47984 to Target 0
Jul 24 16:08:26 bombserver kernel: SCSI host 0 channel 0 reset (pid 46434) timed out - trying harder
Jul 24 16:08:26 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 24 16:08:26 bombserver kernel: scsi0: Resetting BusLogic BT-958 due to Target 0
Jul 24 16:08:26 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 24 16:08:28 bombserver kernel: st0: Error with sense data: extra data not valid Current error st09:00: sns = 70 6
Jul 24 16:08:28 bombserver kernel: ASC=29 ASCQ= 0
Jul 24 16:08:28 bombserver kernel: Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x15 0x00 0x00 0x00 0x00 0x29 0x00 0x00 0x00
Jul 24 16:08:56 bombserver named[54]: ns_forw: query(media.preferences.com) A RR negative cache entry (ns5.nrsite.com:) learnt (NODATA=198.6.1.1:NS=198.6.1.1)
Jul 24 16:10:20 bombserver kernel: scsi0 channel 0 : resetting for second half of retries.
Jul 24 16:10:20 bombserver kernel: SCSI bus is being reset for host 0 channel 0.
Jul 24 16:10:20 bombserver kernel: scsi0: Resetting BusLogic BT-958 due to Target 3
Jul 24 16:10:20 bombserver kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Eventually was able to abort, but now can't read CDROM <no longer exists!>
Jul 24 16:10:22 bombserver kernel: sr0: CDROM not ready. Make sure there is a disc in the drive.
Jul 24 16:10:22 bombserver kernel: sr0: CDROM not ready. Make sure there is a disc in the drive.
Jul 24 16:10:22 bombserver kernel: cdrom: open failed.
Cheers,
Dick Johnson
***** FILE SYSTEM MODIFIED *****
Penguin : Linux version 2.1.108 on an i586 machine (66.15 BogoMips).
Warning : It's hard to remain at the trailing edge of technology.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html