CPU 6x86MX PR233+
Its not even detecting the stepping correctly..
[gregm@tweetie gregm]$ cat /proc/cpuinfo
processor : 0
cpu family : 4
model : 6x86MX 2.5x Core/Bus Clock
vendor_id : CyrixInstead
stepping : 2.6
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
fpu : yes
fpu_exception : yes
cpuid level : -1
wp : yes
flags :
bogomips : 186.78
As you can see its saying in the model 2.5x for the stepping yet the
'stepping' line is saying 2.6? Also its still insisting that it is a cpu
family 4 when it should be a 6.
On boot up the CPU line is as such:
CPU: Cyrix 6x86MX 2.5x Core/Bus Clock stepping 2.6
Now before I get accused of over/underclocking. The external clock is set to
75 MHZ and the stepping is set to 2.5 per the motherboard's instructions.
The motherboard in question is a GCT-8STB.
(http://www.jmcomputers.com/mboard/global.html#8stb)
So anyone have any clues?
-- Gregory McLean Engineer ComStar Communications Inc.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html