The boot mesages, /proc/pci, /proc/interrupts, /proc/ioports are:
Aug 20 22:28:29 localhost syslogd 1.3-3: restart.
Aug 20 22:28:29 localhost kernel: klogd 1.3-3, log source = /proc/kmsg started.
Aug 20 22:28:29 localhost kernel: Cannot find map file.
Aug 20 22:28:29 localhost kernel: No module symbols loaded.
Aug 20 22:28:29 localhost kernel: Console: 16 point font, 400 scans
Aug 20 22:28:29 localhost kernel: Console: colour VGA+ 80x25, 1 virtual console
(max 63)
Aug 20 22:28:29 localhost kernel: pcibios_init : BIOS32 Service Directory
structure at 0x000f7540
Aug 20 22:28:29 localhost kernel: pcibios_init : BIOS32 Service Directory entry
at 0xfd740
Aug 20 22:28:29 localhost kernel: pcibios_init : PCI BIOS revision 2.10 entry
at 0xfd943
Aug 20 22:28:29 localhost kernel: Probing PCI hardware.
Aug 20 22:28:29 localhost kernel: Calibrating delay loop.. ok - 232.65 BogoMIPS
Aug 20 22:28:29 localhost kernel: Memory: 63412k/65536k available (576k kernel
code, 384k reserved,
1164k data)
Aug 20 22:28:29 localhost kernel: Swansea University Computer Society NET3.035
for Linux 2.0
Aug 20 22:28:29 localhost kernel: NET3: Unix domain sockets 0.13 for Linux
NET3.035.
Aug 20 22:28:29 localhost kernel: Swansea University Computer Society TCP/IP
for NET3.034
Aug 20 22:28:29 localhost kernel: IP Protocols: ICMP, UDP, TCP
Aug 20 22:28:29 localhost kernel: Checking 386/387 coupling... Ok, fpu using
exception 16 error rep
orting.
Aug 20 22:28:29 localhost kernel: Checking 'hlt' instruction... Ok.
Aug 20 22:28:29 localhost kernel: Linux version 2.0.35
(root@localhost.localdomain) (gcc version 2.
7.2.3) #1 Tue Aug 18 02:40:46 CEST 1998
Aug 20 22:28:29 localhost kernel: Starting kswapd v 1.4.2.2
Aug 20 22:28:29 localhost kernel: Serial driver version 4.13 with no serial
options enabled
Aug 20 22:28:29 localhost kernel: tty00 at 0x03f8 (irq = 4) is a 16550A
Aug 20 22:28:29 localhost kernel: tty01 at 0x02f8 (irq = 3) is a 16550A
Aug 20 22:28:29 localhost kernel: APM BIOS version 1.2 Flags 0x03 (Driver
version 1.2)
Aug 20 22:28:29 localhost kernel: Entry f000:61bb cseg16 f000 dseg 40 cseg
len ffff, dseg len f
fff
Aug 20 22:28:29 localhost kernel: Connection version 1.1
Aug 20 22:28:29 localhost kernel: AC on line, battery status unknown,
battery life unknown
Aug 20 22:28:29 localhost kernel: battery flag 0x80, battery life unknown
Aug 20 22:28:29 localhost kernel: Real Time Clock Driver v1.09
Aug 20 22:28:29 localhost kernel: ide: i82371 PIIX (Triton) on PCI bus 0
function 57
Aug 20 22:28:29 localhost kernel: ide0: BM-DMA at 0xfcd0-0xfcd7
Aug 20 22:28:29 localhost kernel: ide1: BM-DMA at 0xfcd8-0xfcdf
Aug 20 22:28:29 localhost kernel: hda: FUJITSU MPB3032ATU, 3093MB w/0kB Cache,
CHS=785/128/63, UDMA
Aug 20 22:28:29 localhost kernel: hdc: SAMSUNG WN321620A (2.16 GB), 2060MB
w/109kB Cache, CHS=4186/
16/63, DMA
Aug 20 22:28:29 localhost kernel: hdd: MATSHITA CR-585, ATAPI CDROM drive
Aug 20 22:28:29 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug 20 22:28:29 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Aug 20 22:28:29 localhost kernel: md driver 0.36.3 MAX_MD_DEV=4,
MAX_REAL=8
>> Aug 20 22:28:29 localhost kernel: ncr53c8xx: at PCI bus 0, device 6,
function 0
>> Aug 20 22:28:29 localhost kernel: ncr53c8xx: not initializing, both I/O and
memory mappings disabled
>> Aug 20 22:28:29 localhost kernel: scsi : 0 hosts.
>> Aug 20 22:28:29 localhost kernel: scsi : detected total.
Aug 20 22:28:29 localhost kernel: Partition check:
Aug 20 22:28:29 localhost kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
Aug 20 22:28:29 localhost kernel: hdc: [PTBL] [523/128/63] hdc1 hdc2 < hdc5
hdc6 hdc7 hdc8 hdc9 hdc10 >
Aug 20 22:28:29 localhost kernel: VFS: Mounted root (ext2 filesystem) readonly.
Aug 20 22:28:29 localhost kernel: Adding Swap: 40284k swap-space (priority -1)
Aug 20 22:28:29 localhost kernel: Adding Swap: 44316k swap-space (priority -2)
[root@localhost /usr]# cat /proc/pci
PCI devices found:
Bus 0, device 13, function 0:
VGA compatible controller: ATI Mach64 GT (Rage II) (rev 154).
Medium devsel. Fast back-to-back capable. IRQ 255. Master Capable.
Latency=66. Min Gnt=8.
Non-prefetchable 32 bit memory at 0xfd000000.
I/O at 0xf800.
Non-prefetchable 32 bit memory at 0xfedff000.
Bus 0, device 7, function 3:
Bridge: Intel 82371AB PIIX4 ACPI (rev 1).
Medium devsel. Fast back-to-back capable.
Bus 0, device 7, function 2:
USB Controller: Intel 82371AB PIIX4 USB (rev 1).
Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable.
Latency=64.
I/O at 0xfce0.
Bus 0, device 7, function 1:
IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=64.
I/O at 0xfcd
Bus 0, device 7, function 0:
ISA bridge: Intel 82371AB PIIX4 ISA (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. No bursts.
Bus 0, device 6, function 0:
Non-VGA device: NCR 53c810 (rev 1).
Medium devsel. Master Capable. No bursts.
I/O at 0xff00.
Non-prefetchable 32 bit memory at 0xff00.
Bus 0, device 1, function 0:
PCI bridge: Intel 440LX - 82443LX PAC AGP (rev 3).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=64.
Bus 0, device 0, function 0:
Host bridge: Intel 440LX - 82443LX PAC Host (rev 3).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.
Prefetchable 32 bit memory at 0xf8000000.
[root@localhost /proc]# cat /proc/interrupts
0: 221361 timer
1: 5274 keyboard
2: 0 cascade
3: 9852 + serial
8: 1 + rtc
12: 28357 PS/2 Mouse
13: 1 math error
14: 18803 + ide0
15: 1452 + ide1
[root@localhost /proc]# cat ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-009f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : npu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
fcd0-fcd7 : IDE DMA
fcd8-fcdf : IDE DMA
I'd like to know if there are some means to make working my NCR810
on that board.
Regards and thanks if someone can help.
Andrea
----------------------------------
Home e-mail: ferraris@biella.alpcom.it
Work: eita.teiafer@memo.ericsson.se
20-Aug-98 22:36:01
This message was sent by XFMail
----------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html