# od -tx1 -Ax /proc/bus/pci/00/01.0
# cat /proc/pci
where /proc/bus/pci/00/01.0 is the NCR810 (kernel messages below)
any idea what's wrong with accessing /proc/bus/pci/00/01.0 and `cat /proc/pci'
and/or 2.1.122 ?
-------------------------------------------------------------------------------
# od -tx1 -Ax /proc/bus/pci/00/01.0
000000 00 10 01 00 07 00 00 82 02 00 00 01 00 40 00 00
000010 01 e8 00 00 00 f0 fe fb 00 00 00 00 00 00 00 00
000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000030 00 00 00 00 00 00 00 00 00 00 00 00 0f 01 00 00
000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
000080 da 00 00 13 47 08 00 1f 35 00 80 00 80 00 0f 02
000090 ff a0 09 00 00 ff ff ff 00 f0 35 20 f0 de 00 00
0000a0 00 08 00 54 00 00 00 50 54 d3 00 00 54 d3 00 00
0000b0 a0 cf 00 00 08 00 00 00 80 7d 00 01 f4 a2 01 00
0000c0 8f 05 00 00 4f 00 00 0f 0c 00 80 00 06 00 00 80
0000d0 00 00 ff ff 00 ff ff ff 00 00 ff ff 00 41 00 00
0000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
000100
# cat /proc/pci
[ long wait for SCSI bus reset ... ]
PCI devices found:
Bus 0, device 0, function 0:
Non-VGA device: Intel 82424ZX Saturn (rev 4).
Medium devsel. Master Capable. Latency=96.
Bus 0, device 1, function 0:
SCSI storage controller: NCR 53c810 (rev 2).
Medium devsel. IRQ f. Master Capable. Latency=64.
I/O at 0xe800 [0xe801].
Non-prefetchable 32 bit memory at 0xfbfef000 [0xfbfef000].
Bus 0, device 2, function 0:
Non-VGA device: Intel 82378IB (rev 3).
Medium devsel. Master Capable. No bursts.
Bus 0, device 6, function 0:
VGA compatible controller: S3 Inc. Trio32/Trio64 (rev 84).
Medium devsel. IRQ a.
Non-prefetchable 32 bit memory at 0xf4000000 [0xf4000000].
#
-------------------------------------------------------------------------------
ncr53c810-0: SCSI parity error detected: SCR1=65 DBC=50000000 SSTAT1=f
scsi : aborting command due to timeout : pid 4132143, scsi0, channel 0, id 0, lun 0 Read (6) 0c f4 93 08 00
ncr53c8xx_abort: pid=4132143 serial_number=4132150 serial_number_at_timeout=4132150
ncr53c810-0: abort ccb=c009a020 (cancel)
SCSI host 0 abort (pid 4132143) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
ncr53c8xx_reset: pid=4132143 reset_flags=2 serial_number=4132150 serial_number_at_timeout=4132150
ncr53c810-0: restart (scsi reset).
ncr53c810-0-<0,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
cat uses obsolete /proc/pci interface
ncr53c810-0-<1,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
-------------------------------------------------------------------------------
ncr53c810-0: SCSI parity error detected: SCR1=65 DBC=50000000 SSTAT1=f
scsi : aborting command due to timeout : pid 4132590, scsi0, channel 0, id 0, lun 0 Write (6) 1d 88 7f 02 00
ncr53c8xx_abort: pid=4132590 serial_number=4132605 serial_number_at_timeout=4132605
ncr53c810-0: abort ccb=c1c0a820 (cancel)
SCSI host 0 abort (pid 4132590) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
ncr53c8xx_reset: pid=4132590 reset_flags=2 serial_number=4132605 serial_number_at_timeout=4132605
ncr53c810-0: restart (scsi reset).
ncr53c810-0-<0,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
-------------------------------------------------------------------------------
Harald
--
All SCSI disks will from now on ___ _____
be required to send an email notice 0--,| /OOOOOOO\
24 hours prior to complete hardware failure! <_/ / /OOOOOOOOOOO\
\ \/OOOOOOOOOOOOOOO\
\ OOOOOOOOOOOOOOOOO|//
Harald Koenig, \/\/\/\/\/\/\/\/\/
Inst.f.Theoret.Astrophysik // / \\ \
koenig@tat.physik.uni-tuebingen.de ^^^^^ ^^^^^
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/