Dec 15 00:31:23 moving kernel: Swansea University Computer Society IPX 0.38 for NET3.037
Dec 15 00:31:23 moving kernel: IPX Portions Copyright (c) 1995 Caldera, Inc.
Dec 15 00:31:23 moving kernel: eth0: Emergency stop, looping startup interrupt.
Dec 15 00:31:23 moving kernel: eth0: Disabling interrupt handler 16 to avoid locking up the machine.
Dec 15 00:31:23 moving kernel: Trying to free free IRQ16
Dec 15 00:31:23 moving kernel: eth0: Using user-specified media MII.
Dec 15 00:31:24 moving kernel: CSLIP: code copyright 1989 Regents of the University of California
Dec 15 00:31:24 moving kernel: PPP: version 2.3.3 (demand dialling)
Dec 15 00:31:24 moving kernel: PPP line discipline registered.
Dec 15 00:31:24 moving kernel: registered device ppp0
Dec 15 00:31:24 moving pppd[24845]: pppd 2.3.3 started by r, uid 0
Dec 15 00:31:26 moving kernel: eth0: MII monitoring tick: CSR12 ffffff80, MII status 7809, Link partner report 0000.
Dec 15 00:31:26 moving kernel: eth0: No link beat on the MII interface, status then 7809 now 7809.
Dec 15 00:32:00 moving pppd[24845]: Serial connection established.
eth0 is a Netgear FA-310TX of the true DEC chip persuasion:
tulip.c:v0.83 10/19/97 becker@cesdis.gsfc.nasa.gov
eth0: Digital DS21140 Tulip at 0x6100, 00 40 05 41 96 fa, IRQ 16.
eth0: EEPROM default media type Autosense.
eth0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
eth0: MII transceiver found at MDIO address 0.
eth0: MII monitoring tick: CSR12 ffffff80, MII status 7809, Link partner report 0000.
eth0: No link beat on the MII interface, status then 7809 now 7809.
The cable is a crossover cable to my laptop, which is off.
Question is, why does PPP tickle the Ethernet card and any ideas on this
IRQ problem?
Linux version 2.1.131 (root@moving.van.ml.org) (gcc version egcs-2.91.60
19981201 (egcs-1.1.1 release)) #817 SMP Tue Dec 8 17:33:39
EST 1998
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) APIC version 17
Processor #1 Pentium(tm) APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 232.109 MHz processor.
Console: colour VGA+ 132x43
Calibrating delay loop... 462.03 BogoMIPS
Memory: 128168k/131072k available (704k kernel code, 412k reserved, 1748k
data, 40k init)
VFS: Diskquotas version dquot_6.4.0 initialized
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
CPU0: Intel Pentium MMX stepping 03
calibrating APIC timer ...
..... CPU clock speed is 232.1080 MHz.
..... APIC bus clock speed is 66.3163 MHz.
Booting processor 1 eip 2000
Calibrating delay loop... 463.67 BogoMIPS
OK.
CPU1: Intel Pentium MMX stepping 03
Total of 2 processors activated (925.70 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 20, 21, 22, 23 not connected.
number of MP IRQ sources: 21.
number of IO-APIC registers: 24.
testing the IO APIC.......................
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00170011
....... : max redirection entries: 0017
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 0 0 0 0 0 1 1 71
06 000 00 0 0 0 0 0 1 1 79
07 000 00 0 0 0 0 0 1 1 81
08 000 00 0 0 0 0 0 1 1 89
09 000 00 0 0 0 0 0 1 1 91
0a 000 00 0 0 0 0 0 1 1 99
0b 000 00 0 0 0 0 0 1 1 A1
0c 000 00 0 0 0 0 0 1 1 A9
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 B1
0f 000 00 0 0 0 0 0 1 1 B9
10 0FF 0F 1 1 0 1 0 1 1 C1
11 0FF 0F 1 1 0 1 0 1 1 C9
12 0FF 0F 1 1 0 1 0 1 1 D1
13 0FF 0F 1 1 0 1 0 1 1 D9
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
0->2 1->1 2->-1 3->3 4->4 5->5 6->6 7->7 8->8 9->9 10->10 11->11 12->12
13->13 14->14 15->15 16->16 17->17 18->18 19->19 20->-1 21->-1 22->-1
23->-1 24->-1 25->-1 26->-1 27->-1 28->-1 29->-1 30->-1 31->-1 32->-1
33->-1 34->-1 35->-1 36->-1 37->-1 38->-1 39->-1 40->-1 41->-1 42->-1
43->-1 44->-1 45->-1 46->-1 47->-1 48->-1 49->-1 50->-1 51->-1 52->-1
53->-1 54->-1 55->-1 56->-1 57->-1 58->-1 59->-1 60->-1 61->-1 62->-1
63->-1
.................................... done.
PCI: PCI BIOS revision 2.10 entry at 0xfb5a0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI->APIC IRQ transform: (B0,I20,P0) -> 16
Swansea University Computer Society NET3.039 for Linux 2.1
NET3: Unix domain sockets 0.16 for Linux NET3.038.
Swansea University Computer Society TCP/IP for NET3.037
IP Protocols: ICMP, UDP, TCP
Initializing RT netlink socket
Starting kswapd v 1.5
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.09
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: not 100%% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: Maxtor 71000 A, ATA DISK drive
hdb: CD820E.1v0789108, ATAPI CDROM drive
hdc: IBM-DTTA-371010, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: Maxtor 71000 A, 958MB w/64kB Cache, CHS=1946/16/63, DMA
hdc: IBM-DTTA-371010, 9641MB w/465kB Cache, CHS=19590/16/63, (U)DMA
Partition check:
hda: hda1 hda2 hda3 hda4
hdc: hdc1 hdc2 hdc3 hdc4
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 40k freed
CPU0 CPU1
0: 25464871 25805515 IO-APIC-edge timer
1: 118686 130226 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
3: 3454991 3550871 IO-APIC-edge serial
4: 306238 318997 IO-APIC-edge serial
8: 7 6 IO-APIC-edge rtc
13: 1 0 XT-PIC fpu
14: 248948 259673 IO-APIC-edge ide0
15: 221056 203923 IO-APIC-edge ide1
16: 1437 1444 IO-APIC-level Digital DS21140 Tulip
NMI: 0
IPI: 0
-George
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/