Yes. My netmask is 255.255.248.0
My network runs from 204.178.40.1 -> 204.178.47.255
204.178.40.0 is the "network" address, 204.178.47.255 is the
"broadcast" address. Because of some defective software in some
machines, we don't use 204.178.40.255, 41.255, 42.255, 43.255,
44.255, 45.255, or 46.255 because some machines think that these
are broadcast addresses. The machines that abuse these addresses are
M$garbage machines.
The idea of class A->C networks has come and gone because of the
lack of suitable continuous addresses defined by the original
standard. It is now common to make large networks using contiguous
small networks. The netmask is the thing that defines the "network".
Stuff that doesn't fit through the mask is sent/received through
the "default" route. Once this is understood, configuring a network
is simple.
> Anyone? The HOWTO is rather ambiguous about it. I think it's legal,
> but am not entirely sure. This also seems to imply a broadcast addr. of
> something like 194.111.1.255 for a network address of 194.111.0.0,
> presumably that's OK too?
The broadcast address is the IP number that will be put into packets
that have a hardware destination of ff:ff:ff:ff:ff:ff (did I put in
enough). These packets are received by everyone on the LAN. They
will be received regardless of the IP number contained therein. For
compatibility, its a good idea that the address be within the LAN
range, and contain .255 as its last number. However, some OS don't
care because they never check. Stuff that goes out in the Internet
is changed and cleaned up by the router. Ethernet hardware addresses
are not used on a WAN (like the Internet).
Cheers,
Dick Johnson
***** FILE SYSTEM WAS MODIFIED *****
Penguin : Linux version 2.2.1 on an i686 machine (400.59 BogoMips).
Warning : It's hard to remain at the trailing edge of technology.
Wisdom : It's not a Y2K problem. It's a Y2Day problem.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/