> I looked through the changes from -ac1 to -ac7, and found nothing
> that could be causing this behavior... Nothing changed in ide relevant
> sections or ide-scsi, for that matter. Is this with the same config?
> You didn't enable DMA or something in between?
No DMA. The IDE interface works just fine. Only when using /dev/sg0 does
the problem come up. Maybe it has to do with fragmentation of memory and
scatter gather support?
> Doug, I also checked the sg updates and the change is really miniscule.
> If the config options didn't change between the two runs, I'm baffled...
Will do some more tests.
-----------------------------------------------------------------------------
Christoph Lameter, MSCS, M.Div.
Available for a job or consulting (see http://lameter.com/consulting.html)
-----------------------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/