the sb module is for SoundBlaster ISA cards.. And you should really
compile support for the ES1371, not teh 1370., as the 1371 is a closer
match to the PCI128 (1371 is the SB PCI64v)
The settings in conf.modules look like ISA settings. IRQ 11 sounds right
for one of the settings. Others, who knows. I'm not sure what the I/O and
DMA settings should be for a PCI sound card.
I can guess at DMA 5 and 1, but as to I/O base? Who knows. 220 may work.
On Fri, 7 May 1999, Ruben Schattevoy wrote:
> Hi!
>
> I have problems in getting my soundcard SB128PCI running under
> a 2.2.7 Kernel (SuSE 6.1 system). I have made a kernel with
> support for my soundcard (Ensoniq AudioPCI (rev. 01) with an
> ES1370, I suppose). I can activate the "sound" module:
>
> >modprobe sound
> >lsmod
> Module Size Used by
> sound 59000 0
> soundlow 304 0 [sound]
> soundcore 2788 3 [sound]
>
> But I cannot activate the "sb" module:
>
> >modprobe sb
> /lib/modules/2.2.7/misc/sb.o: init_module: Device or resource busy
> /lib/modules/2.2.7/misc/sb.o: insmod /lib/modules/2.2.7/misc/sb.o failed
> /lib/modules/2.2.7/misc/sb.o: insmod sb failed
>
> The message file gives another hint:
>
> May 7 16:34:00 rzpc kernel: Soundblaster audio driver ...
> May 7 16:34:00 rzpc kernel: sb: dsp reset failed.
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/