I'm trying to make a big firewall with a linux box (Dell PowerEdge 2300 -
One PII 400 - 128M RAM).
The main problem is a boot (tulip driver is linked into the kernel) I've
got this output :
Jun 2 11:32:33 pc-xb kernel: Enabling bus-master transmits and whole-frame receives.
Jun 2 11:32:33 pc-xb kernel: tulip.c:v0.89H 5/23/98 becker@cesdis.gsfc.nasa.gov
Jun 2 11:32:33 pc-xb kernel: eth1: Digital DS21142/3 Tulip at 0xdc80, 00 00 d1 1d 41 c4, IRQ 10.
Jun 2 11:32:33 pc-xb kernel: eth1: EEPROM default media type Autosense.
Jun 2 11:32:33 pc-xb kernel: eth1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
Jun 2 11:32:33 pc-xb kernel: eth1: ***WARNING***: No MII transceiver found!
Jun 2 11:32:33 pc-xb kernel: eth2: Digital DS21142/3 Tulip at 0xdc00, EEPROM not present, 00 00 d1 1d 41 c5, IRQ 10.
Jun 2 11:32:33 pc-xb kernel: eth2: Controller 1 of multiport board.
Jun 2 11:32:33 pc-xb kernel: eth2: EEPROM default media type Autosense.
Jun 2 11:32:33 pc-xb kernel: eth2: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
Jun 2 11:32:33 pc-xb kernel: eth2: ***WARNING***: No MII transceiver found!
Even if my card is connected to the network hub (100Mbit or 10Mbit) the
link led doesn't light and ifconfig eth1 up doesn't help...
Any hints about this problem ?
/Xavier
-- In 1984 mainstream users were choosing VMS over UNIX. Ten years later they are choosing Windows over UNIX. What part of that message aren't you getting? - Tom Payne *** Xavier Beaudouin - 06 6026 5108 - kiwi@oav.net - http://www.oav.net/ [ Below is a random fortune, which is unrelated to the above message. ]If money can't buy happiness, I guess you'll just have to rent it.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/