[snip]
> * If you have a Logitech M-S48 mouse, the wheel will work.
Wheel does not currently work with Logitech M-C48 mouse on serial port
using inputattach. It works fine otherwise.
I used
CONFIG_INPUT_SERPORT=y
CONFIG_INPUT_SERMOUSE=y
CONFIG_INPUT_MOUSEMU=y
CONFIG_INPUT_MOUSEMU_IMPS=y
and
./inputattach --mmwheel /dev/ttyS0
(--mouseman gives same result)
> * No more mouse problems when switching to and from X
The keyboard focus stays on vt 1 when X switches to vt 7, unless I
press ctrl-alt-F7. I think you mentioned this one a while ago though.
> * You can unplug and re-plug AT keyboards and PS/2 mice, and they
> will keep working, and won't loose the LED and autorepeat settings
AT keyboard still isn't working here without PS/2 mouse. I haven't tried
it with the M-C48 plugged into the PS/2 port yet.
It prints:
Jun 6 23:11:53 fatale kernel: serio0: i8042 KBD port at 0x60,0x64 irq 1
Jun 6 23:11:53 fatale kernel: serio1: i8042 AUX port at 0x60,0x64 irq 12
Jun 6 23:11:53 fatale kernel: input0: AT Set 3 keyboard on serio0
...
Jun 6 23:11:53 fatale kernel: fb0: MATROX VGA frame buffer device
Jun 6 23:11:53 fatale kernel: keyboard.c: Adding keyboard: input0
but doesn't respond to keypresses.
USB keyboard and mouse are working fine except the mouse wheel is
backwards. Not surprising since that's not a part of boot protocol, and we
don't have an HID parser.
Also, I use matroxfb with a Matrox Millenium I, and the screen area to the
right of the penguin boot logo shows a corrupted segment of vt 1 from the
previous boot (a bunch of X stuff). It doesn't do that with plain 2.3.5.
Brad
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/