BJP> I'm _not_ seeing errors; see below.
I'm not seeing any errors either. No problems with IDE, or SCSI, or
IDE to SCSI interactions.
Here's the info:
[kayvan@satyr /usr/src/redhat/BUILD/linux]$ cat /proc/version
Linux version 2.2.9-ac6 (root@satyr.sylvan.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Sun Jun 13 21:10:43 PDT 1999
Excerpts from /var/log/dmesg:
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:pio, hdd:pio
hda: WDC AC313000R, ATA DISK drive
hdc: BCD-40XH CD-ROM, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: WDC AC313000R, 12416MB w/512kB Cache, CHS=1582/255/63, (U)DMA
hdc: ATAPI 24X CD-ROM drive, 256kB Cache
[...]
(scsi0) <Adaptec AIC-7860 Ultra SCSI host adapter> found at PCI 12/0
(scsi0) Narrow Channel, SCSI ID=7, 3/255 SCBs
(scsi0) Downloading sequencer code... 419 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.13/3.2.4
<Adaptec AIC-7860 Ultra SCSI host adapter>
scsi : 1 host.
Vendor: Model: CRW620 Rev: 2.40
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Vendor: QUANTUM Model: FIREBALL ST4.3S Rev: 0F0C
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
(scsi0:0:1:0) Synchronous at 10.0 Mbyte/sec, offset 15.
Vendor: CONNER Model: CFP2105S 2.14GB Rev: 172A
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 2, lun 0
(scsi0:0:2:0) Synchronous at 10.0 Mbyte/sec, offset 15.
Vendor: MAXTOR Model: MXT-540SL !N Rev: JA6I
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdc at scsi0, channel 0, id 4, lun 0
(scsi0:0:4:0) Synchronous at 10.0 Mbyte/sec, offset 15.
Vendor: IBM Model: DDRS-34560 Rev: S97B
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdd at scsi0, channel 0, id 6, lun 0
(scsi0:0:6:0) Synchronous at 10.0 Mbyte/sec, offset 15.
sr0: scsi3-mmc drive: 6x/6x writer cd/rw xa/form2 cdda tray
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8519216 [4159 MB] [4.2 GB]
sda: sda1
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 4194304 [2048 MB] [2.0 GB]
sdb: sdb1
SCSI device sdc: hdwr sector= 512 bytes. Sectors= 1065912 [520 MB] [0.5 GB]
sdc: sdc1
SCSI device sdd: hdwr sector= 512 bytes. Sectors= 8925000 [4357 MB] [4.4 GB]
sdd: sdd1
I am running Linux-2.2.9 + patch-2.2.9-ac6 + linux-2.2.6-nbd.patch
(reproduced below):
--- drivers/block/nbd.c.~1~ Thu Apr 15 12:38:38 1999
+++ drivers/block/nbd.c Fri Apr 23 00:16:40 1999
@@ -401,7 +401,7 @@
return 0;
case NBD_SET_SIZE_BLOCKS:
nbd_sizes[dev] = arg;
- nbd_bytesizes[dev] = arg << nbd_blksize_bits[dev];
+ nbd_bytesizes[dev] = ((u64) arg) << nbd_blksize_bits[dev];
return 0;
case NBD_DO_IT:
if (!lo->file)
-- Kayvan Aghaiepour Sylvan | Proud husband of | Father to my kids: Sylvan Associates, Inc. | Laura Isabella Sylvan | Katherine Yelena (8/8/89) http://sylvan.com/~kayvan | | Robin Gregory (2/28/92)- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/