If you just need one mainboard then I can mail it to you by UPS.
So, you need to tell me your mailing address.
By the way, we also develop Audio device and Ethernet (LAN) device.
So, we also need Linux Audio and LAN driver and application support.
Do you have channel which can support us the Linux Audio and LAN device?
Thank you!
Best Regards,
K.M. Liu
-----原始郵件-----
寄件者: Andre M. Hedrick <hedrick@Astro.Dyer.Vanderbilt.Edu>
收件者: kmliu@sis.com.tw <kmliu@sis.com.tw>
日期: 1999年7月1日 AM 08:07
主旨: SiS IDE UDMA driver (announcement) (fwd)
One thing that I forgot to ask for, due to the wee hours of the morning
that I replied to you, was a mainboard or two that has chipsets that have
no/poor support in linux. If there is a USA based part of the company,
I will send you my mailing address do that I can receive these item(s)
for testing.
Just the mainboard(s)....I have various proccessors, memory, ide-devices.
Attached is FREE PR, I gave you over the Linux Development Kernel List.
This is because you came to me with an open hand to work with Linux.
Regards,
Andre Hedrick
The Linux IDE guy
---------- Forwarded message ----------
Date: Mon, 28 Jun 1999 11:16:28 -0500 (CDT)
From: "Andre M. Hedrick" <hedrick@Astro.Dyer.Vanderbilt.Edu>
To: linux-kernel@vger.rutgers.edu
Subject: SiS IDE UDMA driver (announcement)
Anyone out there with this chipset.
I just got a give of datasheets from SIS direct.
They came to me for help.
This looks like a friendly vendor.
If you have a board with troubles, speak up.
I have enough on the plate for now, just cueing things up.
> Andre:
>
> I attached SiS620 data sheet which include north bridge, IDE, VGA.
> And register recommand setting to you.
> If you have any question please let me know.
>
> Best Regards,
> K.M. Liu
>
>
> 主旨: Re: Fw: SiS IDE UDMA driver
>
>
> >On Mon, 28 Jun 1999, K.M. Liu wrote:
> >
> >
> >> Hi,
> >
> >> Thank you for your support of SiS IDE UDMA driver.
> >> If you need any SiS data sheet for porting Linux driver please let me
> know.
> >> I will do my best to help you!
> >> Thank you very much!
> >>
> >> Best Regards,
> >> K.M. Liu
> >
> >Data sheets on all SIS-IDE hardware would be useful.
> >Any special init code in C-source would speed the process.
> >All chipset tuning specs with respect to setfeature calls that define
> >transfer rates at INIT, would be fantastic.
> >IRQ routing table.
> >HOST-Bridge and/or ISA-Bridge setups to enable features.
> >Simplex disable registers.
> >SMP issues?
> >ATA-33 and ATA-66 drive conflicts.
> >
> >Any thing that you can tell me to easy the guess work will be fully used.
> >
> >Kind Regards,
> >
> >Andre Hedrick
> >The Linux IDE guy
> >
>
Andre Hedrick
The Linux IDE guy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/