Anybody has been able to make the pnp driver activate the SB AWE64
?? i just can't !!!! i have tried as it says in the isapnp.txt file but it
doesn't work...it does activates my modem but there is something
strange...here's the whole thing:
1.- here's /proc/isapnp:
Card 1 'CTL00e4:Creative SB AWE64 PnP' PnP version 1.0 Product version 1.0
Logical device 0 'CTL0045:Audio'
Device is active
Active port 0x220,0x330,0x388
Active IRQ 5 [0x2]
Active DMA 1,5
Resources 0
Priority preferred
Port 0x220-0x220, align 0x0, size 0x10, 16-bit address decoding
Port 0x330-0x330, align 0x0, size 0x2, 16-bit address decoding
Port 0x388-0x388, align 0x0, size 0x4, 16-bit address decoding
IRQ 5 High-Edge
DMA 1 8-bit byte-count compatible
DMA 5 16-bit word-count compatible
Alternate resources 0:1
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
Port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding
Port 0x388-0x388, align 0x0, size 0x4, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
DMA 5,6,7 16-bit word-count compatible
Alternate resources 0:2
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
Port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
DMA 5,6,7 16-bit word-count compatible
Alternate resources 0:3
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
DMA 5,6,7 16-bit word-count compatible
Alternate resources 0:4
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
Port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding
Port 0x388-0x388, align 0x0, size 0x4, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
Alternate resources 0:5
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
Port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
Alternate resources 0:6
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
Alternate resources 0:7
Priority functional
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
Port 0x300-0x330, align 0xf, size 0x2, 16-bit address decoding
Port 0x388-0x394, align 0x3, size 0x4, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
DMA 5,6,7 16-bit word-count compatible
Logical device 1 'CTL7002:Game'
Compatible device PNPb02f
Device is not active
Resources 0
Priority preferred
Port 0x200-0x200, align 0x0, size 0x8, 16-bit address decoding
Alternate resources 0:1
Priority acceptable
Port 0x200-0x208, align 0x7, size 0x8, 16-bit address decoding
Logical device 2 'CTL0022:WaveTable'
Device is active
Active port 0x620,0xa20,0xe20
Resources 0
Priority preferred
Port 0x620-0x620, align 0x0, size 0x4, 16-bit address decoding
Alternate resources 0:1
Priority acceptable
Port 0x620-0x680, align 0x1f, size 0x4, 16-bit address decoding
Card 2 'NSC0000:PNP DATA/FAX MODEM' PnP version 1.0
Logical device 0 'ADN0000:Unknown'
Supported registers 0x2
Device is active
Active port 0x3e8
Active IRQ 3 [0x2]
Active DMA ,0
Resources 0
Priority preferred
Port 0x3f8-0x3f8, align 0x0, size 0x8, 16-bit address decoding
IRQ 4 High-Edge
Alternate resources 0:1
Priority preferred
Port 0x2f8-0x2f8, align 0x0, size 0x8, 16-bit address decoding
IRQ 3 High-Edge
Alternate resources 0:2
Priority preferred
Port 0x3e8-0x3e8, align 0x0, size 0x8, 16-bit address decoding
IRQ 5 High-Edge
Alternate resources 0:3
Priority preferred
Port 0x2e8-0x2e8, align 0x0, size 0x8, 16-bit address decoding
IRQ 5 High-Edge
Alternate resources 0:4
Priority acceptable
Port 0x3f8-0x3f8, align 0x0, size 0x8, 16-bit address decoding
IRQ 3,4,5,2/9,10,11,12,15 High-Edge
Alternate resources 0:5
Priority acceptable
Port 0x2f8-0x2f8, align 0x0, size 0x8, 16-bit address decoding
IRQ 4,5,2/9,10,11,12,15 High-Edge
Alternate resources 0:6
Priority acceptable
Port 0x3e8-0x3e8, align 0x0, size 0x8, 16-bit address decoding
IRQ 3,5,2/9,10,11,12,15 High-Edge
Alternate resources 0:7
Priority acceptable
Port 0x2e8-0x2e8, align 0x0, size 0x8, 16-bit address decoding
IRQ 4,5,2/9,10,11,12,15 High-Edge
2.- Here's how i activate my modem:
cat > /proc/isapnp <<EOF
card 0 NSC0000
dev 0 ADN0000
port 0 0x3e8
irq 0 3
activate
And it works...but the strange i think it's that the modem isn't
card 0 right ???
With the SB 64 i tried card 0,1,2,3, even -1 but just nothing...
why the driver can't activate it....What can i do ??? i would like to stop
using isapnptools...
Greetings....
fito.
-- fito@telebot.net- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/