>> I have a PS/2 486SLC which is a 17 bogomip machine. I am having a lot
>> of problems with PPP throughput since moving up from 2.2.10 to 2.2.12.
>> At times I see up to 50% incoming PPP frame errors over a V90 modem
>> link.
>
>Probably. Check for overrun errors - in /proc/tty/driver/serial - they
>show as oe:. For example, I see
>
I have ATM:
0: uart:16550A port:3F8 irq:4 baud:9600 tx:119175 rx:651773 oe:153
CTS|DSR
(Baud rate when in use is 115200)
ifconfig ppp0 shows.
RX packets:54 errors:17 dropped:0 overruns:0 frame:17
So oe is the factor, but I wasn't getting them to the same extent
under 2.2.10.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/