2.3.18ac4 ide detection messages

Thomas Molina (tmolina@home.com)
Wed, 15 Sep 1999 07:14:51 -0500 (CDT)

On a positive note, I upgraded my CPU from a K6-350 to a K6-450 and
Linux didn't even hiccup. It correctly detected the processor and speed
(now to try that mtrr stuff) as opposed to the bios which thinks it's a
400MHz processor. Kernel compile time went from 10:48 to 6:45.

I ran the reccommended sh linux/scripts/MAKEDEV.ide and still get the
following messages:

Uniform Multi-Platform E-IDE driver Revision: 6.20
request_module[ide-probe]: Root fs not mounted
request_module[ide-probe]: Root fs not mounted
request_module[ide-probe]: Root fs not mounted
request_module[ide-probe]: Root fs not mounted
request_module[ide-probe]: Root fs not mounted
request_module[ide-probe]: Root fs not mounted
request_module[ide-probe]: Root fs not mounted
request_module[ide-probe]: Root fs not mounted
request_module[ide-probe]: Root fs not mounted
request_module[ide-probe]: Root fs not mounted
hda: SAMSUNG VG34323A (4.32GB), ATA DISK drive
hdb: WDC AC14300R, ATA DISK drive
hdc: 40X CD-ROM, ATAPI CDROM drive
hdd: PHILIPS CDD3610 CD-R/RW, ATAPI CDROM drive
ide6: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/