Note this is a 2.2.10+SuSE+IDE built native.
<4>Linux version 2.2.10 (andre@suse.com) (gcc version egcs-2.91.66
19990314/Linux (egcs-1.1.2 release)) #1 SMP Sat Sep 11 11:30:19 CDT 1999
<4>Intel MultiProcessor Specification v1.1
<4> Virtual Wire compatibility mode.
<4>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
<4>Processor #0 Pentium(tm) Pro APIC version 17
<4>Processor #1 Pentium(tm) Pro APIC version 17
<4>I/O APIC #2 Version 17 at 0xFEC00000.
<4>Processors: 2
<4>mapped APIC to ffffe000 (fee00000)
<4>mapped IOAPIC to ffffd000 (fec00000)
<4>CPU0: Intel Celeron (Mendocino) stepping 05
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 374.0780 MHz.
<4>..... system bus clock speed is 68.0140 MHz.
<4>CPU1: Intel Celeron (Mendocino) stepping 05
<6>Total of 2 processors activated (747.11 BogoMIPS).
<4>enabling symmetric IO mode... ...done.
<4>ENABLING IO-APIC IRQs
<4>init IO_APIC IRQs
<4> IO-APIC pin 0, 16, 17, 20, 21, 22, 23 not connected.
<4>number of MP IRQ sources: 21.
<4>number of IO-APIC registers: 24.
<4>mtrr: your CPUs had inconsistent fixed MTRR settings
<4>mtrr: probably your BIOS does not setup all CPUs
<4>PCI: PCI BIOS revision 2.10 entry at 0xfb420
What is your take on the mtrr on the Dual Celeron ABit BP6?
Do either of you have a workaround/kludge for this blurb?
processor : 0 | 1
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
cpu MHz : 374.067940
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags (0) : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx osfxsr
flags (1) : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx osfxsr
bogomips : 373.56
Andre Hedrick
The Linux IDE guy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/