I have the same problem. Here is some more data:
2.2.12 does work fine
2.3.21 w/ bigmem oopses directly after memory detection
2.3.21 w/o bigmem does mount the root fs but then failes to run
/sbin/init with error =FAnable to load interpreter. (Yes I did
configure bin_fmt_elf!)
2.3.22 w/ bigmem does mount the root fs and nothing happens any more.
I append the kernel messages of 2.3.22 and 2.2.12 to this message.
(2.3.22 disables serial console in the serial driver init, so it is
truncated. Any idea how to work around this? 2.2.12 does this fine
also)
Greetings
Christoph
--Multipart_Tue_Oct_19_16:44:40_1999-1
Content-Type: application/octet-stream
Content-Disposition: attachment; filename="minicom.8way"
Content-Transfer-Encoding: 7bit
LILO boot: test
Loading test.............
Linux version 2.3.22 (root@ls3016) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #9 SMP Tue Oct 19 13:39:21 CEST 1999
e820: 646144 @ 00000000 (usable)
e820: 9216 @ 0009dc00 (reserved)
e820: 131072 @ 000e0000 (reserved)
e820: 66027520 @ 00100000 (usable)
e820: 31744 @ 03ff8000 (ACPI data)
e820: 1024 @ 03fffc00 type 4
e820: -335544320 @ 04000000 (usable)
e820: 20971520 @ fec00000 (reserved)
e820: 268435456 @ 00000000 (usable)
3520MB BIGMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at 01009120
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: OCPRF100 APIC at: 0xFEE00000
Processor #7 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
Bootup CPU
Processor #0 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
Processor #1 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
Processor #2 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
Processor #3 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
Processor #4 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
Processor #5 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
Processor #6 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
Bus #0 is PCI
Bus #1 is PCI
Bus #2 is PCI
Bus #3 is PCI
Bus #4 is ISA
I/O APIC #8 Version 19 at 0xFEC00000.
Processors: 8
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 550070964 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 548.86 BogoMIPS
memory region: 616k @ 00000003000
memory region: 64480k @ 00000100000
memory region: 3866624k @ 00004000000
memory region: 4456448k @ 00100000000
Memory: 3992876k/4063232k available (1232k kernel code, 436k reserved, 68576k data, 112k init, 3604480k bigmem)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
VFS: Diskquotas version dquot_6.4.0 initialized
Pentium-III serial number disabled.
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35 (19990512) Richard Gooch (rgooch@atnf.csiro.au)
Pentium-III serial number disabled.
per-CPU timeslice cutoff: 400.05 usecs.
CPU7: Intel Pentium III (Katmai) stepping 03
Getting VERSION: 40011
Getting VERSION: 40011
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#7
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
CPU map: ff
Booting processor 0 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Deasserting INIT.
Sending STARTUP #1.
After apic_write.
Startup point 1.
Initializing CPU#0
Waiting for send to finish...
CPU#0 waiting for CALLOUT
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 0.
After Callout 0.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 548.86 BogoMIPS
Stack at about c009bfbc
Pentium-III serial number disabled.
OK.
CPU0: Intel Pentium III (Katmai) stepping 03
CPU has booted.
Booting processor 1 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Deasserting INIT.
Sending STARTUP #1.
After apic_write.
Startup point 1.
Initializing CPU#1
Waiting for send to finish...
CPU#1 waiting for CALLOUT
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 1.
After Callout 1.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 548.86 BogoMIPS
Stack at about c0005fbc
Pentium-III serial number disabled.
OK.
CPU1: Intel Pentium III (Katmai) stepping 03
CPU has booted.
Booting processor 2 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Deasserting INIT.
Sending STARTUP #1.
After apic_write.
Startup point 1.
Initializing CPU#2
Waiting for send to finish...
CPU#2 waiting for CALLOUT
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 2.
After Callout 2.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#2
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 548.86 BogoMIPS
Stack at about c0097fbc
Pentium-III serial number disabled.
OK.
CPU2: Intel Pentium III (Katmai) stepping 03
CPU has booted.
Booting processor 3 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Deasserting INIT.
Sending STARTUP #1.
After apic_write.
Startup point 1.
Initializing CPU#3
Waiting for send to finish...
CPU#3 waiting for CALLOUT
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 3.
After Callout 3.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#3
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 548.86 BogoMIPS
Stack at about c0095fbc
Pentium-III serial number disabled.
OK.
CPU3: Intel Pentium III (Katmai) stepping 03
CPU has booted.
Booting processor 4 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Deasserting INIT.
Sending STARTUP #1.
After apic_write.
Startup point 1.
Initializing CPU#4
Waiting for send to finish...
CPU#4 waiting for CALLOUT
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 4.
After Callout 4.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#4
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 548.86 BogoMIPS
Stack at about c0093fbc
Pentium-III serial number disabled.
OK.
CPU4: Intel Pentium III (Katmai) stepping 03
CPU has booted.
Booting processor 5 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Deasserting INIT.
Sending STARTUP #1.
After apic_write.
Startup point 1.
Initializing CPU#5
Waiting for send to finish...
CPU#5 waiting for CALLOUT
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 5.
After Callout 5.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#5
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 548.86 BogoMIPS
Stack at about c000ffbc
Pentium-III serial number disabled.
OK.
CPU5: Intel Pentium III (Katmai) stepping 03
CPU has booted.
Booting processor 6 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Deasserting INIT.
Sending STARTUP #1.
After apic_write.
Startup point 1.
Initializing CPU#6
Waiting for send to finish...
CPU#6 waiting for CALLOUT
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 6.
After Callout 6.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#6
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 548.86 BogoMIPS
Stack at about c000dfbc
Pentium-III serial number disabled.
OK.
CPU6: Intel Pentium III (Katmai) stepping 03
CPU has booted.
Before bogomips.
Total of 8 processors activated (4390.91 BogoMIPS).
Before bogocount - setting activated=1.
Boot done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 8-0, 8-5, 8-10, 8-11, 8-15, 8-16, 8-17, 8-19, 8-20, 8-21, 8-22, 8-23, 8-24, 8-25, 8-26, 8-27, 8-28, 8-29, 8-30, 8-31, 8-32, 8-33, 8-34, 8-35, 8-37, 8-38, 8-39, 8-40, 8-41, 8-42, 8-43, 8-44, 8-45, 8-46, 8-47, 8-50, 8-51, 8-52, 8-53, 8-54, 8-55, 8-56, 8-57, 8-60, 8-61, 8-62, 8-63 not connected.
activating NMI Watchdog ... done.
number of MP IRQ sources: 21.
number of IO-APIC #8 registers: 64.
testing the IO APIC.......................
IO APIC #8......
.... register #00: 08000000
....... : physical APIC id: 08
.... register #01: 003F0013
....... : max redirection entries: 003F
....... : IO APIC version: 0013
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 0FF 0F 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 0FF 0F 0 0 0 0 0 1 1 61
04 0FF 0F 0 0 0 0 0 1 1 69
05 000 00 1 0 0 0 0 0 0 00
06 0FF 0F 0 0 0 0 0 1 1 71
07 0FF 0F 0 0 0 0 0 1 1 79
08 0FF 0F 0 0 0 1 0 1 1 81
09 0FF 0F 0 0 0 0 0 1 1 89
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 0FF 0F 0 0 0 0 0 1 1 91
0d 000 00 1 0 0 0 0 0 0 00
0e 0FF 0F 0 0 0 0 0 1 1 99
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 0FF 0F 1 1 0 1 0 1 1 A1
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
18 000 00 1 0 0 0 0 0 0 00
19 000 00 1 0 0 0 0 0 0 00
1a 000 00 1 0 0 0 0 0 0 00
1b 000 00 1 0 0 0 0 0 0 00
1c 000 00 1 0 0 0 0 0 0 00
1d 000 00 1 0 0 0 0 0 0 00
1e 000 00 1 0 0 0 0 0 0 00
1f 000 00 1 0 0 0 0 0 0 00
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
23 000 00 1 0 0 0 0 0 0 00
24 0FF 0F 1 1 0 1 0 1 1 A9
25 000 00 1 0 0 0 0 0 0 00
26 000 00 1 0 0 0 0 0 0 00
27 000 00 1 0 0 0 0 0 0 00
28 000 00 1 0 0 0 0 0 0 00
29 000 00 1 0 0 0 0 0 0 00
2a 000 00 1 0 0 0 0 0 0 00
2b 000 00 1 0 0 0 0 0 0 00
2c 000 00 1 0 0 0 0 0 0 00
2d 000 00 1 0 0 0 0 0 0 00
2e 000 00 1 0 0 0 0 0 0 00
2f 000 00 1 0 0 0 0 0 0 00
30 0FF 0F 1 1 0 1 0 1 1 B1
31 0FF 0F 1 1 0 1 0 1 1 B9
32 000 00 1 0 0 0 0 0 0 00
33 000 00 1 0 0 0 0 0 0 00
34 000 00 1 0 0 0 0 0 0 00
35 000 00 1 0 0 0 0 0 0 00
36 000 00 1 0 0 0 0 0 0 00
37 000 00 1 0 0 0 0 0 0 00
38 000 00 1 0 0 0 0 0 0 00
39 000 00 1 0 0 0 0 0 0 00
3a 0FF 0F 1 1 0 1 0 1 1 C1
3b 0FF 0F 1 1 0 1 0 1 1 C9
3c 000 00 1 0 0 0 0 0 0 00
3d 000 00 1 0 0 0 0 0 0 00
3e 000 00 1 0 0 0 0 0 0 00
3f 000 00 1 0 0 0 0 0 0 00
.................................... done.
Initializing CPU#7
calibrating APIC timer ...
..... CPU clock speed is 550.0506 MHz.
..... host bus clock speed is 100.0089 MHz.
cpu: 5, clocks: 1000089, slice: 111121, nr: 7.
cpu: 6, clocks: 1000089, slice: 111121, nr: 8.
cpu: 4, clocks: 1000089, slice: 111121, nr: 6.
CPU5<C0:1000080,C:222224,D:9,S:111121,C:1000089>
CPU6<C0:1000080,C:111104,D:8,S:111121,C:1000089>
CPU4<C0:1000080,C:333344,D:10,S:111121,C:1000089>
cpu: 0, clocks: 1000089, slice: 111121, nr: 2.
cpu: 1, clocks: 1000089, slice: 111121, nr: 3.
cpu: 2, clocks: 1000089, slice: 111121, nr: 4.
cpu: 3, clocks: 1000089, slice: 111121, nr: 5.
CPU0<C0:1000080,C:777824,D:14,S:111121,C:1000089>
CPU3<C0:1000080,C:444464,D:11,S:111121,C:1000089>
CPU1<C0:1000080,C:666704,D:13,S:111121,C:1000089>
CPU2<C0:1000080,C:555584,D:12,S:111121,C:1000089>
cpu: 7, clocks: 1000089, slice: 111121, nr: 1.
CPU7<C0:1000080,C:888944,D:15,S:111121,C:1000089>
checking TSC synchronization across CPUs:
BIOS BUG: CPU#0 improperly initialized, has 114 usecs TSC skew! FIXED.
BIOS BUG: CPU#1 improperly initialized, has 145 usecs TSC skew! FIXED.
BIOS BUG: CPU#2 improperly initialized, has 56 usecs TSC skew! FIXED.
BIOS BUG: CPU#3 improperly initialized, has -95 usecs TSC skew! FIXED.
BIOS BUG: CPU#4 improperly initialized, has -37 usecs TSC skew! FIXED.
BIOS BUG: CPU#5 improperly initialized, has 324 usecs TSC skew! FIXED.
BIOS BUG: CPU#6 improperly initialized, has -161 usecs TSC skew! FIXED.
BIOS BUG: CPU#7 improperly initialized, has -346 usecs TSC skew! FIXED.
Setting commenced=1, go go go
PCI: PCI BIOS revision 2.10 entry at 0xfdaf5
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Interrupt Routing Table found at 0xc00fdea0 [router type 0000/0000]
PCI: Discovered primary peer bus 01 [IRQ]
PCI: Discovered primary peer bus 02 [IRQ]
PCI: Discovered primary peer bus 03 [IRQ]
PCI->APIC IRQ transform: (B0,I0,P0) -> 59
PCI->APIC IRQ transform: (B0,I10,P0) -> 58
PCI->APIC IRQ transform: (B0,I10,P1) -> 18
PCI->APIC IRQ transform: (B0,I12,P0) -> 48
PCI->APIC IRQ transform: (B0,I15,P3) -> 49
PCI->APIC IRQ transform: (B1,I0,P0) -> 59
PCI->APIC IRQ transform: (B1,I7,P0) -> 36
PCI->APIC IRQ transform: (B2,I0,P0) -> 59
PCI->APIC IRQ transform: (B3,I0,P0) -> 59
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (established 262144 bind 65536)
Starting kswapd v1.6
Detected PS/2 Mouse Port.
Serial driver version 4.30 with SHARE_IRQ SERIAL_PCI PCI_IOMEM enabled
LILO boot:
Loading 2.2.12-th13............
Linux version 2.2.12-th13 (root@ls3004) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 SMP Fri Oct 15 13:40:25 CEST 1999
2943MB BIGMEM available.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: OCPRF100 APIC at: 0xFEE00000
Processor #7 Pentium(tm) Pro APIC version 17
Processor #0 Pentium(tm) Pro APIC version 17
Processor #1 Pentium(tm) Pro APIC version 17
Processor #2 Pentium(tm) Pro APIC version 17
Processor #3 Pentium(tm) Pro APIC version 17
Processor #4 Pentium(tm) Pro APIC version 17
Processor #5 Pentium(tm) Pro APIC version 17
Processor #6 Pentium(tm) Pro APIC version 17
I/O APIC #8 Version 19 at 0xFEC00000.
Processors: 8
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 550074910 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 548.86 BogoMIPS
Memory: 3891192k/3932096k available (1104k kernel code, 428k reserved, 39284k data, 88k init, 3014592k bigmem)
VFS: Diskquotas version dquot_6.4.0 initialized
Pentium-III serial number disabled.
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
Pentium-III serial number disabled.
per-CPU timeslice cutoff: 400.05 usecs.
CPU7: Intel Pentium III (Katmai) stepping 03
calibrating APIC timer ...
..... CPU clock speed is 550.0839 MHz.
..... system bus clock speed is 100.0150 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 548.86 BogoMIPS
Pentium-III serial number disabled.
OK.
CPU0: Intel Pentium III (Katmai) stepping 03
Booting processor 1 eip 2000
Calibrating delay loop... 548.86 BogoMIPS
Pentium-III serial number disabled.
OK.
CPU1: Intel Pentium III (Katmai) stepping 03
Booting processor 2 eip 2000
Calibrating delay loop... 548.86 BogoMIPS
Pentium-III serial number disabled.
OK.
CPU2: Intel Pentium III (Katmai) stepping 03
Booting processor 3 eip 2000
Calibrating delay loop... 548.86 BogoMIPS
Pentium-III serial number disabled.
OK.
CPU3: Intel Pentium III (Katmai) stepping 03
Booting processor 4 eip 2000
Calibrating delay loop... 548.86 BogoMIPS
Pentium-III serial number disabled.
OK.
CPU4: Intel Pentium III (Katmai) stepping 03
Booting processor 5 eip 2000
Calibrating delay loop... 548.86 BogoMIPS
Pentium-III serial number disabled.
OK.
CPU5: Intel Pentium III (Katmai) stepping 03
Booting processor 6 eip 2000
Calibrating delay loop... 548.86 BogoMIPS
Pentium-III serial number disabled.
OK.
CPU6: Intel Pentium III (Katmai) stepping 03
Total of 8 processors activated (4390.91 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 5, 10, 11, 15, 16, 17, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 50, 51, 52, 53, 54, 55, 56, 57, 60, 61, 62, 63 not connected.
number of MP IRQ sources: 21.
number of IO-APIC registers: 64.
testing the IO APIC.......................
.... register #00: 08000000
....... : physical APIC id: 08
.... register #01: 003F0013
....... : max redirection entries: 003F
....... : IO APIC version: 0013
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 1 0 0 0 0 0 0 00
06 000 00 0 0 0 0 0 1 1 71
07 000 00 0 0 0 0 0 1 1 79
08 000 00 0 0 0 1 0 1 1 81
09 000 00 0 0 0 0 0 1 1 89
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 0 0 0 0 0 1 1 91
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 99
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 0FF 0F 1 1 0 1 0 1 1 A1
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
18 000 00 1 0 0 0 0 0 0 00
19 000 00 1 0 0 0 0 0 0 00
1a 000 00 1 0 0 0 0 0 0 00
1b 000 00 1 0 0 0 0 0 0 00
1c 000 00 1 0 0 0 0 0 0 00
1d 000 00 1 0 0 0 0 0 0 00
1e 000 00 1 0 0 0 0 0 0 00
1f 000 00 1 0 0 0 0 0 0 00
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
23 000 00 1 0 0 0 0 0 0 00
24 0FF 0F 1 1 0 1 0 1 1 A9
25 000 00 1 0 0 0 0 0 0 00
26 000 00 1 0 0 0 0 0 0 00
27 000 00 1 0 0 0 0 0 0 00
28 000 00 1 0 0 0 0 0 0 00
29 000 00 1 0 0 0 0 0 0 00
2a 000 00 1 0 0 0 0 0 0 00
2b 000 00 1 0 0 0 0 0 0 00
2c 000 00 1 0 0 0 0 0 0 00
2d 000 00 1 0 0 0 0 0 0 00
2e 000 00 1 0 0 0 0 0 0 00
2f 000 00 1 0 0 0 0 0 0 00
30 0FF 0F 1 1 0 1 0 1 1 B1
31 0FF 0F 1 1 0 1 0 1 1 B9
32 000 00 1 0 0 0 0 0 0 00
33 000 00 1 0 0 0 0 0 0 00
34 000 00 1 0 0 0 0 0 0 00
35 000 00 1 0 0 0 0 0 0 00
36 000 00 1 0 0 0 0 0 0 00
37 000 00 1 0 0 0 0 0 0 00
38 000 00 1 0 0 0 0 0 0 00
39 000 00 1 0 0 0 0 0 0 00
3a 0FF 0F 1 1 0 1 0 1 1 C1
3b 0FF 0F 1 1 0 1 0 1 1 C9
3c 000 00 1 0 0 0 0 0 0 00
3d 000 00 1 0 0 0 0 0 0 00
3e 000 00 1 0 0 0 0 0 0 00
3f 000 00 1 0 0 0 0 0 0 00
.................................... done.
PCI: PCI BIOS revision 2.10 entry at 0xfdaf5
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered primary peer bus 01
PCI: Discovered primary peer bus 02
PCI: Discovered primary peer bus 03
PCI->APIC IRQ transform: (B0,I0,P0) -> 59
PCI->APIC IRQ transform: (B0,I10,P0) -> 58
PCI->APIC IRQ transform: (B0,I10,P1) -> 18
PCI->APIC IRQ transform: (B0,I12,P0) -> 48
PCI->APIC IRQ transform: (B0,I15,P3) -> 49
PCI->APIC IRQ transform: (B1,I0,P0) -> 59
PCI->APIC IRQ transform: (B1,I7,P0) -> 36
PCI->APIC IRQ transform: (B2,I0,P0) -> 59
PCI->APIC IRQ transform: (B3,I0,P0) -> 59
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 2048 Unix98 ptys configured
Real Time Clock Driver v1.09
PIIX4: IDE controller on PCI bus 00 dev 79
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1820-0x1827, BIOS settings: hda:DMA, hdb:pio
hda: LTN382, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 40X CD-ROM drive, 120kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
sym53c8xx: at PCI bus 0, device 10, function 0
sym53c8xx: 53c896 detected
sym53c8xx: at PCI bus 0, device 10, function 1
sym53c8xx: 53c896 detected
sym53c896-0: rev=0x05, base=0xf8005400, io_port=0x1000, irq=58
sym53c896-0: ID 7, Fast-40, Parity Checking
sym53c896-0: on-chip RAM at 0xf8000000
sym53c896-0: restart (scsi reset).
sym53c896-0: handling phase mismatch from SCRIPTS.
sym53c896-0: Downloading SCSI SCRIPTS.
sym53c896-1: rev=0x05, base=0xf8005800, io_port=0x1400, irq=18
sym53c896-1: ID 7, Fast-40, Parity Checking
sym53c896-1: on-chip RAM at 0xf8002000
sym53c896-1: restart (scsi reset).
sym53c896-1: handling phase mismatch from SCRIPTS.
sym53c896-1: Downloading SCSI SCRIPTS.
ncr53c8xx: at PCI bus 0, device 10, function 0
ncr53c8xx: IO region 0x1000 to 0x107f is in use
ncr53c8xx: at PCI bus 0, device 10, function 1
ncr53c8xx: IO region 0x1400 to 0x147f is in use
megaraid: v1.04 (August 16, 1999)
scsi0 : sym53c8xx - version 1.3g
scsi1 : sym53c8xx - version 1.3g
scsi : 2 hosts.
Vendor: SEAGATE Model: ST39102LC Rev: 0005
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: SEAGATE Model: ST39102LC Rev: 0005
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Vendor: ESG-SHV Model: SCA HSBP M8 Rev: 0.05
Type: Processor ANSI SCSI revision: 02
sym53c896-0-<0,0>: tagged command queue depth set to 4
sym53c896-0-<1,0>: tagged command queue depth set to 4
scsi : detected 2 SCSI disks total.
sym53c896-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB]
sym53c896-0-<1,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB]
Partition check:
sda: sda1 sda2 < sda5 sda6 sda7 >
sdb: sdb1
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 88k freed
--Multipart_Tue_Oct_19_16:44:40_1999-1--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/