----- Original Message -----
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: Anthony Barbachan <barbacha@hinako.ambusiness.com>
Sent: Thursday, October 21, 1999 2:04 PM
Subject: Re: Maximum number of SCSI drives detectable when loading SCSI
drivers as modules.
> There is a limit unless you tweak the scsi module code yes.
>
----- Original Message -----
From: Matthew Jacob <mjacob@feral.com>
To: Anthony Barbachan <barbacha@Hinako.AMBusiness.com>
Cc: <linux-kernel@vger.rutgers.edu>
Sent: Thursday, October 21, 1999 1:40 PM
Subject: Re: Maximum number of SCSI drives detectable when loading
SCSIdrivers as modules.
>
> See the lines at the bottom of hosts.h.
>
>
> On Thu, 21 Oct 1999, Anthony Barbachan wrote:
>
> > Is there some limit to the number of SCSI drives detectable when loading
> > SCSI drivers as modules? I've sean similar behavior from two distinct
> > SCSI cards. A Future Domain TMC-18C30 and an Adaptec 1510a. Both
drivers
> > would only detect 3 of 5 or 3 of 4 SCSI drives on the chain. The Future
> > Domain driver has an option to enable the use of some old SCSI device
> > detection code. If I enable this code section, the Future Domain driver
> > is able to detect all the drives on the chain. Unfortunately the Future
> > Domain has also proved unreliable and I would like to switch to the
> > Adaptec insead, so is there any way I can get that driver to recognize
all
> > of my SCSI drives?
> >
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/