I see a comment about 40.0MB/sec below. This is an ultra2 card,
cable, and tape drive. Should it say 80.0MB/sec?
Oct 22 08:55:23 rpppc2 kernel: (scsi0) <Adaptec AHA-294X Ultra2 SCSI host adapter> found at PCI 16/0
Oct 22 08:55:23 rpppc2 kernel: (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
Oct 22 08:55:23 rpppc2 kernel: (scsi0) Downloading sequencer code... 374 instructions downloaded
Oct 22 08:55:23 rpppc2 kernel: scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.20/3.2.4
Oct 22 08:55:23 rpppc2 kernel: <Adaptec AHA-294X Ultra2 SCSI host adapter>
Oct 22 08:55:23 rpppc2 kernel: scsi : 1 host.
Oct 22 08:55:23 rpppc2 kernel: (scsi0:0:0:0) Synchronous at 40.0 Mbyte/sec, offset 15.
Oct 22 08:55:23 rpppc2 kernel: Vendor: SONY Model: SDT-10000 Rev: 0101
Oct 22 08:55:23 rpppc2 kernel: Type: Sequential-Access ANSI SCSI revision: 02
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/