Re: access beyond end of device errors in 2.2.13pre18 AND 2.2.5

Dan Hollis (goemon@sasami.anime.net)
Wed, 27 Oct 1999 13:44:59 -0700 (PDT)

On Wed, 27 Oct 1999, Daniel Roesen wrote:
> > Well I do have a similar Problem with LVD Scsi drives (IBM DDRS)
> > connected to an 7890 Adaptec U2W controller (on board on Asus P2Bs);
> > Intel Pentium II 400MHz, 128MB RAM. Running kernel 2.2.5-22.
> Hm, no problems over here.
> (scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at PCI 6/0
> (scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 15.
> Vendor: IBM Model: DDRS-34560D Rev: DC1B
> (scsi0:0:10:0) Synchronous at 80.0 Mbyte/sec, offset 15.
> Vendor: IBM Model: DDRS-34560D Rev: DC1B

No problems here either.

scsi0 : sym53c8xx - version 1.3g
scsi : 1 host.
Vendor: IBM Model: DDRS-34560D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: IBM Model: DDRS-34560D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
sym53c875E-0-<0,0>: tagged command queue depth set to 4
sym53c875E-0-<1,0>: tagged command queue depth set to 4
scsi : detected 2 SCSI disks total.
sym53c875E-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8925000 [4357 MB] [4.4 GB]
sym53c875E-0-<1,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8925000 [4357 MB] [4.4 GB]

-Dan

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/