RE: SMP system with Abit BP6, dual celeron

Tom Livingston (tsl@volition.org)
Sun, 31 Oct 1999 14:24:18 -0800

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Rogier Wolff: "hanging system."
Previous message: Joseph Gooch: "2.2.14pre3 Masquerade Fix"

Gabor Lenart wrote:
> Another interesting symptom : kernel compiling (it's for testing stability
> with 'make -j 30') stops, but does not exit or so ... Alt+sysreq combos
> reports 13 processes with 'R" state. Machine was usable for a while on
> other terminals.

This is consistent with an unreliable overclock. Reduce the cpu speed to
the factory speed and see if this cures your problem. You may need extra
voltage to run reliably at these speeds, or you may be unable to completely.

tom

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

Next message: Rogier Wolff: "hanging system."
Previous message: Joseph Gooch: "2.2.14pre3 Masquerade Fix"