I recently took all of the hardware out of an SS-10, CPU's, disk
controller, etc, and put it back in a 4/670MP that I had retired, and fired it
up to play news server for a while. It has run stable under 2.2.x.
It had 384MB of RAM in it. But I had other 4/670MP's around and I had
this idea that I could take memory from them and put more in this machine
allowing it to cache more and maybe speed up news processing.
With 384MB the machine boots and runs Linux like a top. I tried to
increase this to 512MB but when I put the additional memory in the boot does
not complete. After doing the partition check, it prints something like:
dma device 29 unknown
dma device 29 unknown
dma device 29 unknown
dma device 29 unknown
It prints that four times, then complains that it can't open the root
partition and waits for L1-A.
Take the last 128MB of memory back out and everything is OK again. No
changes to fstab or disk configuration or anything other than memory. The
memory test tested all 512MB without any problem and there wasn't any other
indication of bad memory.
Is there something about the 4/670MP DMA hardware that restricts it to
384MB? I tried putting more memory in one of these running SunOS once and it
didn't complain but didn't run stable.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/