diff -ruN linux-2.3.27/drivers/video/Makefile linux/drivers/video/Makefile
--- linux-2.3.27/drivers/video/Makefile Wed Nov 10 15:15:25 1999
+++ linux/drivers/video/Makefile Fri Nov 12 19:00:37 1999
@@ -1,553 +1,119 @@
-#
-# Makefile for the kernel video drivers.
-#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now inherited from the
-# parent makes..
-#
-
-L_TARGET := video.a
-L_OBJS :=
-M_OBJS :=
-LX_OBJS :=
-MX_OBJS :=
-MOD_LIST_NAME := VIDEO_MODULES
-
-CONFIG_FBGEN_BUILTIN :=
-CONFIG_FBGEN_MODULE :=
-
-# Frame Buffer Console
-
-ifeq ($(CONFIG_FB),y)
- # Nasty trick to make sure all wanted stuff is linked in
- O_TARGET = fbdev.o
- L_OBJS += fbdev.o
-endif
-
-ifeq ($(CONFIG_DUMMY_CONSOLE),y)
- L_OBJS += dummycon.o
-endif
-
-ifeq ($(CONFIG_PROM_CONSOLE),y)
- L_OBJS += promcon.o promcon_tbl.o
-endif
-
-ifeq ($(CONFIG_FB),y)
- L_OBJS += fonts.o
- OX_OBJS += fbcon.o fbcmap.o fbmem.o modedb.o
- ifeq ($(CONFIG_FONT_8x8),y)
- L_OBJS += font_8x8.o
- endif
- ifeq ($(CONFIG_FONT_8x16),y)
- L_OBJS += font_8x16.o
- endif
- ifeq ($(CONFIG_FONT_SUN8x16),y)
- L_OBJS += font_sun8x16.o
- endif
- ifeq ($(CONFIG_FONT_SUN12x22),y)
- L_OBJS += font_sun12x22.o
- endif
- ifeq ($(CONFIG_FONT_6x11),y)
- L_OBJS += font_6x11.o
- endif
- ifeq ($(CONFIG_FONT_ACORN_8x8),y)
- L_OBJS += font_acorn_8x8.o
- endif
- ifeq ($(CONFIG_FONT_PEARL_8x8),y)
- L_OBJS += font_pearl_8x8.o
- endif
-endif
-
-# Frame Buffer Devices
-
-ifeq ($(CONFIG_FB_ACORN),y)
-L_OBJS += acornfb.o
-else
- ifeq ($(CONFIG_FB_ACORN),m)
- M_OBJS += acornfb.o
- endif
-endif
-
-ifeq ($(CONFIG_FB_AMIGA),y)
-L_OBJS += amifb.o
-else
- ifeq ($(CONFIG_FB_AMIGA),m)
- M_OBJS += amifb.o
- endif
-endif
-
-ifeq ($(CONFIG_FB_PM2),y)
-L_OBJS += pm2fb.o
-CONFIG_FBGEN_BUILTIN = y
-else
- ifeq ($(CONFIG_FB_PM2),m)
- M_OBJS += pm2fb.o
- CONFIG_FBGEN_MODULE = y
- endif
-endif
-
-ifeq ($(CONFIG_FB_APOLLO),y)
-L_OBJS += dnfb.o
-endif
-
-ifeq ($(CONFIG_FB_Q40),y)
-L_OBJS += q40fb.o
-endif
-
-ifeq ($(CONFIG_FB_ATARI),y)
-L_OBJS += atafb.o
-else
- ifeq ($(CONFIG_FB_ATARI),m)
- M_OBJS += atafb.o
- endif
-endif
-
-ifeq ($(CONFIG_FB_ATY),y)
-L_OBJS += atyfb.o
-else
- ifeq ($(CONFIG_FB_ATY),m)
- M_OBJS += atyfb.o
- endif
-endif
-
-ifeq ($(CONFIG_FB_ATY128),y)
-L_OBJS += aty128fb.o
-endif
-
-ifeq ($(CONFIG_FB_IGA),y)
-L_OBJS += igafb.o
-endif
-
-ifeq ($(CONFIG_FB_CONTROL),y)
-L_OBJS += controlfb.o
-endif
-
-ifeq ($(CONFIG_FB_PLATINUM),y)
-L_OBJS += platinumfb.o
-endif
-
-ifeq ($(CONFIG_FB_VALKYRIE),y)
-L_OBJS += valkyriefb.o
-endif
-
-ifeq ($(CONFIG_FB_CT65550),y)
-L_OBJS += chipsfb.o
-endif
-
-ifeq ($(CONFIG_FB_CYBER),y)
-L_OBJS += cyberfb.o
-else
- ifeq ($(CONFIG_FB_CYBER),m)
- M_OBJS += cyberfb.o
- endif
-endif
-
-ifeq ($(CONFIG_FB_CYBER2000),y)
-L_OBJS += cyber2000fb.o
-else
- ifeq ($(CONFIG_FB_CYBER2000),m)
- M_OBJS += cyber2000fb.o
- endif
-endif
-
-ifeq ($(CONFIG_FB_SGIVW),y)
-LX_OBJS += sgivwfb.o
-else
- ifeq ($(CONFIG_FB_SGIVW),m)
- MX_OBJS += sgivwfb.o
- endif
-endif
-
-ifeq ($(CONFIG_FB_RIVA),y)
-L_OBJS += rivafb.o riva_hw.o
-endif
-
-ifeq ($(CONFIG_FB_3DFX),y)
-L_OBJS += tdfxfb.o
-endif
-
-ifeq ($(CONFIG_FB_MAC),y)
-L_OBJS += macfb.o
-endif
-
-ifeq ($(CONFIG_FB_HP300),y)
-L_OBJS += hpfb.o
-endif
-
-ifeq ($(CONFIG_FB_OF),y)
-L_OBJS += offb.o macmodes.o
-endif
-
-ifeq ($(CONFIG_FB_IMSTT),y)
-L_OBJS += imsttfb.o
-endif
-
-ifeq ($(CONFIG_FB_RETINAZ3),y)
-L_OBJS += retz3fb.o
-else
- ifeq ($(CONFIG_FB_RETINAZ3),m)
- M_OBJS += retz3fb.o
- endif
-endif
-
-ifeq ($(CONFIG_FB_CLGEN),y)
-L_OBJS += clgenfb.o
-CONFIG_FBGEN_BUILTIN = y
-else
- ifeq ($(CONFIG_FB_CLGEN),m)
- M_OBJS += clgenfb.o
- CONFIG_FBGEN_MODULE = y
- endif
-endif
-
-ifeq ($(CONFIG_FB_S3TRIO),y)
-L_OBJS += S3triofb.o
-else
- ifeq ($(CONFIG_FB_S3TRIO),m)
- M_OBJS += S3triofb.o
- endif
-endif
-
-ifeq ($(CONFIG_FB_TGA),y)
-L_OBJS += tgafb.o
-CONFIG_FBGEN_BUILTIN = y
-else
- ifeq ($(CONFIG_FB_TGA),m)
- M_OBJS += tgafb.o
- CONFIG_FBGEN_MODULE = y
- endif
-endif
-
-ifeq ($(CONFIG_FB_VESA),y)
-L_OBJS += vesafb.o
-endif
-
-ifeq ($(CONFIG_FB_VGA16),y)
-L_OBJS += vga16fb.o
-else
- ifeq ($(CONFIG_FB_VGA16),m)
- M_OBJS += vga16fb.o
- endif
-endif
-
-ifeq ($(CONFIG_FB_VIRGE),y)
-L_OBJS += virgefb.o
-else
- ifeq ($(CONFIG_FB_VIRGE),m)
- M_OBJS += virgefb.o
- endif
-endif
-
-ifdef CONFIG_FB_G364
-L_OBJS := $(L_OBJS) g364fb.o
-endif
-
-ifdef CONFIG_FB_FM2
-L_OBJS := $(L_OBJS) fm2fb.o
-endif
-
-ifeq ($(CONFIG_FB_SBUS),y)
-L_OBJS += sbusfb.o
- ifeq ($(CONFIG_FB_CREATOR),y)
- L_OBJS += creatorfb.o
- else
- ifeq ($(CONFIG_FB_CREATOR),m)
- M_OBJS += creatorfb.o
- endif
- endif
- ifeq ($(CONFIG_FB_CGSIX),y)
- L_OBJS += cgsixfb.o
- else
- ifeq ($(CONFIG_FB_CGSIX),m)
- M_OBJS += cgsixfb.o
- endif
- endif
- ifeq ($(CONFIG_FB_BWTWO),y)
- L_OBJS += bwtwofb.o
- else
- ifeq ($(CONFIG_FB_BWTWO),m)
- M_OBJS += bwtwofb.o
- endif
- endif
- ifeq ($(CONFIG_FB_CGTHREE),y)
- L_OBJS += cgthreefb.o
- else
- ifeq ($(CONFIG_FB_CGTHREE),m)
- M_OBJS += cgthreefb.o
- endif
- endif
- ifeq ($(CONFIG_FB_TCX),y)
- L_OBJS += tcxfb.o
- else
- ifeq ($(CONFIG_FB_TCX),m)
- M_OBJS += tcxfb.o
- endif
- endif
- ifeq ($(CONFIG_FB_CGFOURTEEN),y)
- L_OBJS += cgfourteenfb.o
- else
- ifeq ($(CONFIG_FB_CGFOURTEEN),m)
- M_OBJS += cgfourteenfb.o
- endif
- endif
- ifeq ($(CONFIG_FB_P9100),y)
- L_OBJS += p9100fb.o
- else
- ifeq ($(CONFIG_FB_P9100),m)
- M_OBJS += p9100fb.o
- endif
- endif
- ifeq ($(CONFIG_FB_LEO),y)
- L_OBJS += leofb.o
- else
- ifeq ($(CONFIG_FB_LEO),m)
- M_OBJS += leofb.o
- endif
- endif
-else
- ifeq ($(CONFIG_FB_SBUS),m)
- M_OBJS += sbusfb.o
- ifeq ($(CONFIG_FB_CREATOR),y)
- M_OBJS += creatorfb.o
- else
- ifeq ($(CONFIG_FB_CREATOR),m)
- M_OBJS += creatorfb.o
- endif
- endif
- ifeq ($(CONFIG_FB_CGSIX),y)
- M_OBJS += cgsixfb.o
- else
- ifeq ($(CONFIG_FB_CGSIX),m)
- M_OBJS += cgsixfb.o
- endif
- endif
- ifeq ($(CONFIG_FB_BWTWO),y)
- M_OBJS += bwtwofb.o
- else
- ifeq ($(CONFIG_FB_BWTWO),m)
- M_OBJS += bwtwofb.o
- endif
- endif
- ifeq ($(CONFIG_FB_CGTHREE),y)
- M_OBJS += cgthreefb.o
- else
- ifeq ($(CONFIG_FB_CGTHREE),m)
- M_OBJS += cgthreefb.o
- endif
- endif
- ifeq ($(CONFIG_FB_TCX),y)
- M_OBJS += tcxfb.o
- else
- ifeq ($(CONFIG_FB_TCX),m)
- M_OBJS += tcxfb.o
- endif
- endif
- ifeq ($(CONFIG_FB_CGFOURTEEN),y)
- M_OBJS += cgfourteenfb.o
- else
- ifeq ($(CONFIG_FB_CGFOURTEEN),m)
- M_OBJS += cgfourteenfb.o
- endif
- endif
- ifeq ($(CONFIG_FB_P9100),y)
- M_OBJS += p9100fb.o
- else
- ifeq ($(CONFIG_FB_P9100),m)
- M_OBJS += p9100fb.o
- endif
- endif
- ifeq ($(CONFIG_FB_LEO),y)
- M_OBJS += leofb.o
- else
- ifeq ($(CONFIG_FB_LEO),m)
- M_OBJS += leofb.o
- endif
- endif
- endif
-endif
-
-ifeq ($(CONFIG_FB_VIRTUAL),y)
-L_OBJS += vfb.o
-else
- ifeq ($(CONFIG_FB_VIRTUAL),m)
- M_OBJS += vfb.o
- endif
-endif
-
-ifdef CONFIG_FBGEN_BUILTIN
-OX_OBJS += fbgen.o
-else
- ifdef CONFIG_FBGEN_MODULE
- MX_OBJS += fbgen.o
- endif
-endif
-
-ifeq ($(CONFIG_FB_MATROX),y)
-L_OBJS += matroxfb.o
-else
- ifeq ($(CONFIG_FB_MATROX),m)
- M_OBJS += matroxfb.o
- endif
-endif
+# Makefile for the Linux video drivers.
+# 5 Aug 1999, James Simmons, <mailto:jsimmons@edgeglobal.com>
+# Rewritten to use lists instead of if-statements.
+
+SUB_DIRS :=
+MOD_SUB_DIRS :=
+MOD_IN_SUB_DIRS :=
+ALL_SUB_DIRS :=
+
+# All of the (potential) objects that export symbols.
+# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
+
+export-objs := fbmem.o fbcmap.o fbcon.o fbcon-afb.o fbcon-ilbm.o fbcon-vga.o fbcon-iplan2p2.o fbcon-iplan2p4.o fbcon-iplan2p8.o fbcon-vga-planes.o fbcon-cfb16.o fbcon-cfb2.o fbcon-cfb24.o fbcon-cfb32.o fbcon-cfb4.o fbcon-cfb8.o fbcon-mac.o fbcon-mfb.o fbcon-vga.o
+
+# Object file lists.
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_DUMMY_CONSOLE) += dummycon.o
+obj-$(CONFIG_SGI_NEWPORT_CONSOLE) += newport_con.o vga_font.o
+obj-$(CONFIG_PROM_CONSOLE) += promcon.o promcon_tbl.o
+obj-$(CONFIG_VGA_CONSOLE) += vgacon.o
+obj-$(CONFIG_MDA_CONSOLE) += mdacon.o
+
+obj-$(CONFIG_FONT_SUN8x16) += font_sun8x16.o
+obj-$(CONFIG_FONT_SUN12x22) += font_sun12x22.o
+obj-$(CONFIG_FONT_8x8) += font_8x8.o
+obj-$(CONFIG_FONT_8x16) += font_8x16.o
+obj-$(CONFIG_FONT_6x11) += font_6x11.o
+obj-$(CONFIG_FONT_PEARL_8x8) += font_pearl_8x8.o
+obj-$(CONFIG_FONT_ACORN_8x8) += font_acorn_8x8.o
+
+obj-$(CONFIG_FB) += fbmem.o fbcmap.o modedb.o fbcon.o fonts.o
+
+obj-$(CONFIG_FB_ACORN) += acornfb.o
+obj-$(CONFIG_FB_AMIGA) += amifb.o
+obj-$(CONFIG_FB_PM2) += pm2fb.o fbgen.o
+obj-$(CONFIG_FB_APOLLO) += dnfb.o
+obj-$(CONFIG_FB_Q40) += q40fb.o
+obj-$(CONFIG_FB_ATARI) += atafb.o
+obj-$(CONFIG_FB_ATY) += atyfb.o
+obj-$(CONFIG_FB_ATY128) += aty128fb.o
+obj-$(CONFIG_FB_IGA) += igafb.o
+obj-$(CONFIG_FB_CONTROL) += controlfb.o
+obj-$(CONFIG_FB_PLATINUM) += platinumfb.o
+obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o
+obj-$(CONFIG_FB_CT65550) += chipsfb.o
+obj-$(CONFIG_FB_CYBER) += cyberfb.o
+obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o
+obj-$(CONFIG_FB_SGIVW) += sgivwfb.o
+obj-$(CONFIG_FB_RIVA) += rivafb.o riva_hw.o
+obj-$(CONFIG_FB_3DFX) += tdfxfb.o
+obj-$(CONFIG_FB_MAC) += macfb.o
+obj-$(CONFIG_FB_HP300) += hpfb.o
+obj-$(CONFIG_FB_OF) += offb.o macmodes.o
+obj-$(CONFIG_FB_IMSTT) += imsttfb.o
+obj-$(CONFIG_FB_RETINAZ3) += retz3fb.o
+obj-$(CONFIG_FB_CLGEN) += clgenfb.o fbgen.o
+obj-$(CONFIG_FB_S3TRIO) += S3triofb.o
+obj-$(CONFIG_FB_TGA) += tgafb.o fbgen.o
+obj-$(CONFIG_FB_VESA) += vesafb.o
+obj-$(CONFIG_FB_VGA16) += vga16fb.o fbcon-vga-planes.o
+obj-$(CONFIG_FB_VIRGE) += virgefb.o
+obj-$(CONFIG_FB_G364) += g364fb.o
+obj-$(CONFIG_FB_FM2) += fm2fb.o
+obj-$(CONFIG_FB_CREATOR) += creatorfb.o sbusfb.o
+obj-$(CONFIG_FB_CGSIX) += cgsixfb.o sbusfb.o
+obj-$(CONFIG_FB_BWTWO) += bwtwofb.o sbusfb.o
+obj-$(CONFIG_FB_CGTHREE) += cgthreefb.o sbusfb.o
+obj-$(CONFIG_FB_TCX) += tcxfb.o sbusfb.o
+obj-$(CONFIG_FB_CGFOURTEEN) += cgfourteenfb.o sbusfb.o
+obj-$(CONFIG_FB_P9100) += p9100fb.o sbusfb.o
+obj-$(CONFIG_FB_LEO) += leofb.o sbusfb.o
+obj-$(CONFIG_FB_MATROX) += matroxfb.o
+obj-$(CONFIG_FB_VIRTUAL) += vfb.o
# Generic Low Level Drivers
-ifeq ($(CONFIG_FBCON_AFB),y)
-OX_OBJS += fbcon-afb.o
-else
- ifeq ($(CONFIG_FBCON_AFB),m)
- MX_OBJS += fbcon-afb.o
- endif
-endif
-
-ifeq ($(CONFIG_FBCON_CFB2),y)
-OX_OBJS += fbcon-cfb2.o
-else
- ifeq ($(CONFIG_FBCON_CFB2),m)
- MX_OBJS += fbcon-cfb2.o
- endif
-endif
-
-ifeq ($(CONFIG_FBCON_CFB4),y)
-OX_OBJS += fbcon-cfb4.o
-else
- ifeq ($(CONFIG_FBCON_CFB4),m)
- MX_OBJS += fbcon-cfb4.o
- endif
-endif
-
-ifeq ($(CONFIG_FBCON_CFB8),y)
-OX_OBJS += fbcon-cfb8.o
-else
- ifeq ($(CONFIG_FBCON_CFB8),m)
- MX_OBJS += fbcon-cfb8.o
- endif
-endif
-
-ifeq ($(CONFIG_FBCON_CFB16),y)
-OX_OBJS += fbcon-cfb16.o
-else
- ifeq ($(CONFIG_FBCON_CFB16),m)
- MX_OBJS += fbcon-cfb16.o
- endif
-endif
-
-ifeq ($(CONFIG_FBCON_CFB24),y)
-OX_OBJS += fbcon-cfb24.o
-else
- ifeq ($(CONFIG_FBCON_CFB24),m)
- MX_OBJS += fbcon-cfb24.o
- endif
-endif
-
-ifeq ($(CONFIG_FBCON_CFB32),y)
-OX_OBJS += fbcon-cfb32.o
-else
- ifeq ($(CONFIG_FBCON_CFB32),m)
- MX_OBJS += fbcon-cfb32.o
- endif
-endif
-
-ifeq ($(CONFIG_FBCON_ILBM),y)
-OX_OBJS += fbcon-ilbm.o
-else
- ifeq ($(CONFIG_FBCON_ILBM),m)
- MX_OBJS += fbcon-ilbm.o
- endif
-endif
-
-ifeq ($(CONFIG_FBCON_IPLAN2P2),y)
-OX_OBJS += fbcon-iplan2p2.o
-else
- ifeq ($(CONFIG_FBCON_IPLAN2P2),m)
- MX_OBJS += fbcon-iplan2p2.o
- endif
-endif
-
-ifeq ($(CONFIG_FBCON_IPLAN2P4),y)
-OX_OBJS += fbcon-iplan2p4.o
-else
- ifeq ($(CONFIG_FBCON_IPLAN2P4),m)
- MX_OBJS += fbcon-iplan2p4.o
- endif
-endif
-
-ifeq ($(CONFIG_FBCON_IPLAN2P8),y)
-OX_OBJS += fbcon-iplan2p8.o
-else
- ifeq ($(CONFIG_FBCON_IPLAN2P8),m)
- MX_OBJS += fbcon-iplan2p8.o
- endif
-endif
-
-ifeq ($(CONFIG_FBCON_IPLAN2P16),y)
-OX_OBJS += fbcon-iplan2p16.o
-else
- ifeq ($(CONFIG_FBCON_IPLAN2P16),m)
- MX_OBJS += fbcon-iplan2p16.o
- endif
-endif
-
-ifeq ($(CONFIG_FBCON_MAC),y)
-OX_OBJS += fbcon-mac.o
-else
- ifeq ($(CONFIG_FBCON_MAC),m)
- MX_OBJS += fbcon-mac.o
- endif
-endif
-
-ifeq ($(CONFIG_FBCON_MFB),y)
-OX_OBJS += fbcon-mfb.o
-else
- ifeq ($(CONFIG_FBCON_MFB),m)
- MX_OBJS += fbcon-mfb.o
- endif
-endif
-
-ifeq ($(CONFIG_FBCON_VGA_PLANES),y)
-OX_OBJS += fbcon-vga-planes.o
-else
- ifeq ($(CONFIG_FBCON_VGA_PLANES),m)
- MX_OBJS += fbcon-vga-planes.o
- endif
-endif
-
-ifeq ($(CONFIG_FBCON_VGA),y)
-OX_OBJS += fbcon-vga.o
-else
- ifeq ($(CONFIG_FBCON_VGA),m)
- MX_OBJS += fbcon-vga.o
- endif
-endif
-
-# VGA Text Console
-
-ifdef CONFIG_VGA_CONSOLE
-L_OBJS += vgacon.o
-endif
-
-# MDA Text Console
-
-ifeq ($(CONFIG_MDA_CONSOLE),y)
-L_OBJS += mdacon.o
-else
- ifeq ($(CONFIG_MDA_CONSOLE),m)
- M_OBJS += mdacon.o
- endif
-endif
-
-# Newport Text Console
-
-ifeq ($(CONFIG_SGI_NEWPORT_CONSOLE),y)
-L_OBJS += newport_con.o vga_font.o
-else
- ifeq ($(CONFIG_SGI_NEWPORT_CONSOLE),m)
- M_OBJS += newport_con.o vga_font.o
- endif
-endif
+obj-$(CONFIG_FBCON_AFB) += fbcon-afb.o
+obj-$(CONFIG_FBCON_CFB2) += fbcon-cfb2.o
+obj-$(CONFIG_FBCON_CFB4) += fbcon-cfb4.o
+obj-$(CONFIG_FBCON_CFB8) += fbcon-cfb8.o
+obj-$(CONFIG_FBCON_CFB16) += fbcon-cfb16.o
+obj-$(CONFIG_FBCON_CFB24) += fbcon-cfb24.o
+obj-$(CONFIG_FBCON_CFB32) += fbcon-cfb32.o
+obj-$(CONFIG_FBCON_ILBM) += fbcon-ilbm.o
+obj-$(CONFIG_FBCON_IPLAN2P2) += fbcon-iplan2p2.o
+obj-$(CONFIG_FBCON_IPLAN2P4) += fbcon-iplan2p4.o
+obj-$(CONFIG_FBCON_IPLAN2P8) += fbcon-iplan2p8.o
+obj-$(CONFIG_FBCON_IPLAN2P16) += fbcon-iplan2p16.o
+obj-$(CONFIG_FBCON_MAC) += fbcon-mac.o
+obj-$(CONFIG_FBCON_MFB) += fbcon-mfb.o
+obj-$(CONFIG_FBCON_VGA) += fbcon-vga.o
+
+# Files that are both resident and modular: remove from modular.
+
+obj-m := $(filter-out $(obj-y), $(obj-m))
+
+# Take multi-part drivers out of obj-y and put components in.
+
+obj-y := $(filter-out $(list-multi), $(obj-y))
+
+# Translate to Rules.make lists.
+
+L_TARGET := video.a
+# This is a nice idea but needs depmod altering
+#MOD_LIST_NAME := VIDEO_MODULES
+
+L_OBJS := $(sort $(filter-out $(export-objs), $(obj-y)))
+LX_OBJS := $(sort $(filter $(export-objs), $(obj-y)))
+M_OBJS := $(sort $(filter-out $(export-objs), $(obj-m)))
+MX_OBJS := $(sort $(filter $(export-objs), $(obj-m)))
include $(TOPDIR)/Rules.make
diff -ruN linux-2.3.27/drivers/video/fbmem.c linux/drivers/video/fbmem.c
--- linux-2.3.27/drivers/video/fbmem.c Wed Nov 10 15:15:25 1999
+++ linux/drivers/video/fbmem.c Fri Nov 12 19:00:37 1999
@@ -674,39 +674,6 @@
fb_drivers[i].init();
}
-
-int fbmon_valid_timings(u_int pixclock, u_int htotal, u_int vtotal,
- const struct fb_info *fb_info)
-{
-#if 0
- /*
- * long long divisions .... $#%%#$
- */
- unsigned long long hpicos, vpicos;
- const unsigned long long _1e12 = 1000000000000ULL;
- const struct fb_monspecs *monspecs = &fb_info->monspecs;
-
- hpicos = (unsigned long long)htotal*(unsigned long long)pixclock;
- vpicos = (unsigned long long)vtotal*(unsigned long long)hpicos;
- if (!vpicos)
- return 0;
-
- if (monspecs->hfmin == 0)
- return 1;
-
- if (hpicos*monspecs->hfmin > _1e12 || hpicos*monspecs->hfmax < _1e12 ||
- vpicos*monspecs->vfmin > _1e12 || vpicos*monspecs->vfmax < _1e12)
- return 0;
-#endif
- return 1;
-}
-
-int fbmon_dpms(const struct fb_info *fb_info)
-{
- return fb_info->monspecs.dpms;
-}
-
-
/*
* Command line options
*/
diff -ruN linux-2.3.27/drivers/video/fbmon.c linux/drivers/video/fbmon.c
--- linux-2.3.27/drivers/video/fbmon.c Wed Dec 31 19:00:00 1969
+++ linux/drivers/video/fbmon.c Fri Nov 12 19:00:37 1999
@@ -0,0 +1,73 @@
+/*
+ * linux/drivers/video/fbmon.c
+ *
+ * Copyright (C) 1999 James Simmons
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * Notes:
+ * This code handles the different types of monitors that are out their.
+ * Most video cards for example can support a mode like 800x600 but fix
+ * frequency monitors can't. So the code here checks if the monitor can
+ * support the mode as well as the card can. Fbmonospecs takes on
+ * different meaning with different types of monitors. For multifrequency
+ * monitors fbmonospecs represents the range of frequencies the monitor
+ * can support. Only one fbmonospec needs to be allocated. The fbmonospecs
+ * pointer in fb_info points to this one. If you specific a mode that has
+ * timing greater than the allowed range then setting the video mode will
+ * fail. With multifrequency monitors you can set any mode you like as long
+ * as you have a programmable clock on the video card.
+ * With fixed frequency monitors you have only a SET of very narrow
+ * allowed frequency ranges. So for a fixed fequency monitor you have a
+ * array of fbmonospecs. The fbmonospecs in fb_info represents the
+ * monitor frequency for the CURRENT mode. If you change the mode and ask
+ * for fbmonospecs you will NOT get the same values as before. Note this
+ * is not true for multifrequency monitors where you do get the same
+ * fbmonospecs each time. Also the values in each fbmonospecs represent the
+ * very narrow frequency band for range. Well you can't have exactly the
+ * same frequencies from fixed monitor. So some tolerance is excepted.
+ * By DEFAULT all monitors are assumed fixed frequency since they are so
+ * easy to fry or screw up a mode with. Just try setting a 800x600 mode on
+ * one. After you boot you can run a simple program the tells what kind of
+ * monitor you have. If you have a multifrequency monitor then you can set
+ * any mode size you like as long as your video card has a programmable clock.
+ * By default also besides assuming you have a fixed frequency monitor it
+ * assumes the monitor only supports lower modes. This way for example you
+ * can't set a 1280x1024 mode on a fixed frequency monitor that can only
+ * support up to 1024x768.
+ *
+ */
+#include <linux/fb.h>
+
+int fbmon_valid_timings(u_int pixclock, u_int htotal, u_int vtotal,
+ const struct fb_info *fb_info)
+{
+#if 0
+ /*
+ * long long divisions .... $#%%#$
+ */
+ unsigned long long hpicos, vpicos;
+ const unsigned long long _1e12 = 1000000000000ULL;
+ const struct fb_monspecs *monspecs = &fb_info->monspecs;
+
+ hpicos = (unsigned long long)htotal*(unsigned long long)pixclock;
+ vpicos = (unsigned long long)vtotal*(unsigned long long)hpicos;
+ if (!vpicos)
+ return 0;
+
+ if (monspecs->hfmin == 0)
+ return 1;
+
+ if (hpicos*monspecs->hfmin > _1e12 || hpicos*monspecs->hfmax < _1e12 ||
+ vpicos*monspecs->vfmin > _1e12 || vpicos*monspecs->vfmax < _1e12)
+ return 0;
+#endif
+ return 1;
+}
+
+int fbmon_dpms(const struct fb_info *fb_info)
+{
+ return fb_info->monspecs->dpms;
+}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/