Re: 3C59x Problem in 2.2.16

From: Robert A. Morris (ramorris@dilithium.net)
Date: Sat Jun 10 2000 - 11:26:39 EST


On Sat, 10 Jun 2000, you wrote:
> Does 2.2.15 on the machine with 2.2.16 problems also behave nicely ?

Yes, I've used 2.2.10-2.2.15 on that machine with that card without incident
(before that I had a different network card).

> If 2.2.15 is fine then you can copy the 3c59x.[ch] from 2.2.15 into 2.2.16
> and build a hybrid kernel quite safely.

I've done so and I'm now running the hybrid kernel. That seems to fix all the
errors.

FWIW, running stock 2.2.16 on a similar Athlon setup with a 3Com 3c905B Cyclone
*without* the BNC and AUI interfaces (dmesg info below) on a web server I'm in
charge of has generated no problems. This is on a separate physical network
though.

Here's the info on the card that works with 2.2.16:

3c59x.c:v0.99H 27May00 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c905B Cyclone 100baseTx at 0xd000, 00:10:5a:c9:44:0e, IRQ 12
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
  MII transceiver found at address 24, status 782d.
  Enabling bus-master transmits and whole-frame receives.

If this really is a bug, I'm willing to help test any patches or perform any
tests that anyone asks.

Thanks!

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Jun 15 2000 - 21:00:21 EST