[PATCH] libata: Fix ATAPI error handling

[Jeff Garzik]

Patch 1/2 for review by the linux-scsi crowd.

Please do not apply, I would prefer to get an ack and apply this myself.

The patch also needs a tiny bit of work on the libata side.




From: Hannes Reinecke <hare@xxxxxxx>
Subject: Fix sata atapi error handling

SCSI commands which end up on the error handler need special attention;
we have to make sure that eh_cmd_q is properly emptied or scsi_eh will
try to forever finalize the command.

With this patch eh_cmd_q is explicitely emptied if not done so in the
strategy handler and a proper abort sequence is executed for each
command if required.
We rely on the strategy handler to fill out proper sense information for
us as SATA is 'special' when it comes to command sense gathering.

Signed-off-by: Kurt Garloff <garloff@xxxxxxx>
Signed-off-by: Jens Axboe <axboe@xxxxxxx>
Acked-by: Andreas Gruenbacher <agruen@xxxxxxx>

Index: linux-2.6.11/drivers/scsi/libata-core.c
===================================================================
--- linux-2.6.11.orig/drivers/scsi/libata-core.c
+++ linux-2.6.11/drivers/scsi/libata-core.c
@@ -41,6 +41,7 @@
 #include <scsi/scsi.h>
 #include "scsi.h"
 #include "scsi_priv.h"
+#include "scsi_logging.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
 #include <asm/io.h>
@@ -2587,6 +2588,11 @@ static void atapi_request_sense(struct a
 	DPRINTK("EXIT\n");
 }
 
+void ata_qc_timeout_done(struct scsi_cmnd *scmd)
+{
+	return;
+}
+
 /**
  *	ata_qc_timeout - Handle timeout of queued command
  *	@qc: Command that timed out
@@ -2618,17 +2624,16 @@ static void ata_qc_timeout(struct ata_qu
 		struct scsi_cmnd *cmd = qc->scsicmd;
 
 		if (!scsi_eh_eflags_chk(cmd, SCSI_EH_CANCEL_CMD)) {
-
 			/* finish completing original command */
+			qc->scsidone = ata_qc_timeout_done;
+
 			__ata_qc_complete(qc);
 
 			atapi_request_sense(ap, dev, cmd);
 
 			cmd->result = (CHECK_CONDITION << 1) | (DID_OK << 16);
-			scsi_finish_command(cmd);
-
-			goto out;
 		}
+		goto out;
 	}
 
 	/* hack alert!  We cannot use the supplied completion
Index: linux-2.6.11/drivers/scsi/libata-scsi.c
===================================================================
--- linux-2.6.11.orig/drivers/scsi/libata-scsi.c
+++ linux-2.6.11/drivers/scsi/libata-scsi.c
@@ -633,12 +633,6 @@ int ata_scsi_error(struct Scsi_Host *hos
 	ap = (struct ata_port *) &host->hostdata[0];
 	ap->ops->eng_timeout(ap);
 
-	/* TODO: this is per-command; when queueing is supported
-	 * this code will either change or move to a more
-	 * appropriate place
-	 */
-	host->host_failed--;
-
 	DPRINTK("EXIT\n");
 	return 0;
 }
Index: linux-2.6.11/drivers/scsi/scsi_error.c
===================================================================
--- linux-2.6.11.orig/drivers/scsi/scsi_error.c
+++ linux-2.6.11/drivers/scsi/scsi_error.c
@@ -1610,6 +1610,40 @@ static void scsi_unjam_host(struct Scsi_
 	scsi_eh_flush_done_q(&eh_done_q);
 }
 
+static void scsi_invoke_strategy_handler(struct Scsi_Host *shost)
+{
+	int rtn;
+	struct list_head *lh, *lh_sf;
+	struct scsi_cmnd *scmd;
+	unsigned long flags;
+	LIST_HEAD(eh_work_q);
+	LIST_HEAD(eh_done_q);
+
+	rtn = shost->hostt->eh_strategy_handler(shost);
+
+	spin_lock_irqsave(shost->host_lock, flags);
+	list_splice_init(&shost->eh_cmd_q, &eh_work_q);
+	spin_unlock_irqrestore(shost->host_lock, flags);
+
+	SCSI_LOG_ERROR_RECOVERY(1, scsi_eh_prt_fail_stats(shost, &eh_work_q));
+
+	list_for_each_safe(lh, lh_sf, &eh_work_q) {
+		scmd = list_entry(lh, struct scsi_cmnd, eh_entry);
+
+		if (scsi_eh_eflags_chk(scmd, SCSI_EH_CANCEL_CMD) ||
+		    !SCSI_SENSE_VALID(scmd))
+			continue;
+		scmd->retries = scmd->allowed;
+		scsi_eh_finish_cmd(scmd, &eh_done_q);
+	}
+
+	if (!list_empty(&eh_work_q))
+		if (!scsi_eh_abort_cmds(&eh_work_q, &eh_done_q))
+			scsi_eh_ready_devs(shost, &eh_work_q, &eh_done_q);
+
+	scsi_eh_flush_done_q(&eh_done_q);
+}
+
 /**
  * scsi_error_handler - Handle errors/timeouts of SCSI cmds.
  * @data:	Host for which we are running.
@@ -1624,7 +1658,6 @@ static void scsi_unjam_host(struct Scsi_
 int scsi_error_handler(void *data)
 {
 	struct Scsi_Host *shost = (struct Scsi_Host *) data;
-	int rtn;
 	DECLARE_MUTEX_LOCKED(sem);
 
 	/*
@@ -1680,8 +1713,8 @@ int scsi_error_handler(void *data)
 		 * what we need to do to get it up and online again (if we can).
 		 * If we fail, we end up taking the thing offline.
 		 */
-		if (shost->hostt->eh_strategy_handler) 
-			rtn = shost->hostt->eh_strategy_handler(shost);
+		if (shost->hostt->eh_strategy_handler)
+			scsi_invoke_strategy_handler(shost);
 		else
 			scsi_unjam_host(shost);
 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/