Re: WOL with forcedeth broken sincef55c21fd9a92a444e55ad1ca4e4732d56661bf2e

From: Philipp Matthias Hahn
Date: Fri Feb 06 2009 - 00:33:34 EST


Hello!

On Fri, Feb 06, 2009 at 01:13:30AM +0100, Rafael J. Wysocki wrote:
...
> > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12614
> > > Subject : WOL with forcedeth broken since f55c21fd9a92a444e55ad1ca4e4732d56661bf2e
...
> > Strage, at the moment I can't seem to reproduce the problem. I've
> > switched back to the version of 2.6.28.3 and now it seems to work.
> > I'll continue with tesing.
>
> OK, but for now I'll close the bug as unreproducible.

Just this morning I had to use the reverted address to wake up my
desktop PC after 6 hours of poweroff.

Yesterdays tests were domething like the following:
Grub: Linux "loglevel=9 ignore_loglevel break=modules"
dmesg -c > /dev/null
modprobe forcedeth
dmesg
ethtool -s eth0 wol g
echo NMAC > /proc/acpi/wakeup
reboot to Grub using Alt-SysRq-B
Grub: "halt"
I have to reboot back to Grub, since doing a "poweroff" from initrd or
pressing Alt-SysRq-O seems to turn of WOL.

...
> The "echo NMAC > /proc/acpi/wakeup" thing shouldn't be necessary if you do
> "ethtool -s eth0 wol g".

Will try.

On Thu, Feb 05, 2009 at 03:35:25PM -0800, Yinghai Lu wrote:
> > Nether the less here's the output of dmesg:
> > forcedeth: Reverse Engineered nFoce ethernet driver. Version 0.61.
> > ACPI: PCI Interrupt Link [LMAC] enables at IRQ 23
> > forcedeth: 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
> > forcedeth: 0000:00:14.0: setting latency timer to 64
> > * nv_probe: MAC_ADDR_REV ELSE
> > nv_probe: set workaround bit for reversed mac addr
>
> that means your BIOS doesn't reverse mac addr.
> this is the one for new BIOS or old BIOS?

This is the new BIOS.

BYtE
Philipp Hahn
--
/ / (_)__ __ ____ __ Philipp Hahn
/ /__/ / _ \/ // /\ \/ /
/____/_/_//_/\_,_/ /_/\_\ pmhahn@xxxxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/