Re: [PATCH] hwrng: Add TX4939 RNG driver

[Matt Mackall]

On Mon, 2009-06-01 at 01:45 +0900, Atsushi Nemoto wrote:
> On Fri, 29 May 2009 16:29:07 -0700, Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> wrote:
> > I assume that the MIPS patch "[PATCH] TXx9: Add TX4939 RNG support"
> > depends upon this patch?
> 
> To build kernel or driver, no dependencies.  To use this device
> actually, both patches are needed.
> 
> > > +static u64 read_rng(void __iomem *base, unsigned int offset)
> > > +{
> > > +	/* Caller must disable interrupts */
> > > +	return ____raw_readq(base + offset);
> > > +}
> > 
> > What is the reasoning behind the local_irq_disable() requirement?
> > 
> > Because I'm wondering whether this is safe on SMP?
> 
> As Ralf replied, These local_irq_disable stuff are just for 64-bit
> access on 32-bit kernel.  Maybe something like this is preferred?
> 
> static void ____raw_io_start(void)
> {
> #ifndef CONFIG_64BIT
> 	/* some comments... */
> 	local_irq_enable();
> #endif
> }
> 
> static void ____raw_io_end(void)
> {
> #ifndef CONFIG_64BIT
> 	/* see above */
> 	local_irq_disable();
> #endif
> }
> 
> For SMP concurrent access, these rountines are protected by mutex in
> rng-core.  Also this SoC does not support SMP.  There should be no
> problem here.
> 
> > > +	for (i = 0; i < 20; i++) {
> ...
> > > +		udelay(1);
> > > +	}
> > > +	return rngdev->data_avail;
> > > +}
> > 
> > The mysterious udelay() needs a comment, because there is no way in
> > which the reader can otherwise work out why it is there.
> 
> Well, this comments can be applied most RNG drivers ;)
> 
> Anyway, I will add some comment here.  I take this loop (20 loops with
> udelay) from other drivers and changed to udelay(1) because the
> datasheed states "90 bus clock cycles by default" for generation
> (typically 450ns for this SoC).
> 
> > > +static int tx4939_rng_data_read(struct hwrng *rng, u32 *buffer)
> > > +{
> > > +	struct tx4939_rng *rngdev = container_of(rng, struct tx4939_rng, rng);
> > > +
> > > +	rngdev->data_avail--;
> > > +	*buffer = *((u32 *)&rngdev->databuf + rngdev->data_avail);
> > > +	return sizeof(u32);
> > > +}
> > 
> > Concurrent callers can corrupt rngdev->data_avail ?
> 
> This is protected by rng_mutex in rng-core.
> 
> > > +	/* Start RNG */
> > > +	write_rng(TX4939_RNG_RCSR_ST, rngdev->base, TX4939_RNG_RCSR);
> > > +	local_irq_enable();
> > > +	/* drop first two results */
> > 
> > The comment doesn't provide the reason for doing this?
> 
> >From the datasheet:
> 
> 	The quality of the random numbers generated immediately after
> 	reset can be insufficient.  Therefore, do not use random
> 	numbers obtained from the first and second generations; use
> 	the ones from the third or subsequent generation.

Does the datasheet say anything about -how- the random numbers are
produced? Most physical sources that I'm aware of don't have this sort
of issue. But some pseudo-RNGs do. So this looks a little worrisome.

-- 
http://selenic.com : development and support for Mercurial and Linux


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/