RE: [E1000-devel] e1000e 0000:00:19.0 eth0: Hardware Error

[Ronciak, John]

Boris,

What kind of system (platform) is this happening on?  It's a LOM correct?  Can you run 'lspci -vvv' and output the results?

Thanks.

Cheers,
John


> -----Original Message-----
> From: Borislav Petkov [mailto:bp@xxxxxxxxx]
> Sent: Thursday, April 10, 2014 5:00 AM
> To: e1000-devel@xxxxxxxxxxxxxxxxxxxxx
> Cc: netdev@xxxxxxxxxxxxxxx; lkml
> Subject: [E1000-devel] e1000e 0000:00:19.0 eth0: Hardware Error
> 
> Hi guys,
> 
> I started getting those sporadic
> 
> [133178.640890] e1000e 0000:00:19.0 eth0: Hardware Error
> [133179.293148] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
> [133179.394226] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
> [133179.397200] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [133181.338258] e1000e 0000:00:19.0 eth0: Hardware Error
> [133182.077209] pci_pm_runtime_suspend():
> e1000_runtime_suspend+0x0/0x40 [e1000e] returns -2
> 
> messages with 3.14 and I haven't had them before. After this, I do
> 
> rmmod e1000e && modprobe e1000e
> 
> and I get:
> 
> [133221.891555] e1000e 0000:00:19.0 eth0: removed PHC [133228.181552]
> e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [133228.181562]
> e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
> [133228.182241] e1000e 0000:00:19.0: Interrupt Throttling Rate
> (ints/sec) set to dynamic conservative mode [133228.182332] e1000e
> 0000:00:19.0: irq 45 for MSI/MSI-X [133229.009837] e1000e: probe of
> 0000:00:19.0 failed with error -2
> 			^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> 
> [133307.107217] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
> [133307.107228] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
> [133307.107814] e1000e 0000:00:19.0: Interrupt Throttling Rate
> (ints/sec) set to dynamic conservative mode [133307.107959] e1000e
> 0000:00:19.0: irq 45 for MSI/MSI-X [133307.935921] e1000e: probe of
> 0000:00:19.0 failed with error -2
> 
> ...
> 
> [133841.361905] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
> [133841.361914] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
> [133841.362451] e1000e 0000:00:19.0: Interrupt Throttling Rate
> (ints/sec) set to dynamic conservative mode [133841.362520] e1000e
> 0000:00:19.0: irq 45 for MSI/MSI-X [133842.192710] e1000e: probe of
> 0000:00:19.0 failed with error -2
> 
> each time I try and eth0 is dead. Only a reboot helps, I've come to
> find out so far.
> 
> Any ideas?
> 
> --
> Regards/Gruss,
>     Boris.
> 
> Sent from a fat crate under my desk. Formatting is fine.
> --
> 
> -----------------------------------------------------------------------
> -------
> Put Bad Developers to Shame
> Dominate Development with Jenkins Continuous Integration Continuously
> Automate Build, Test & Deployment Start a new project now. Try Jenkins
> in the cloud.
> http://p.sf.net/sfu/13600_Cloudbees
> _______________________________________________
> E1000-devel mailing list
> E1000-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/e1000-devel
> To learn more about Intel® Ethernet, visit
> http://communities.intel.com/community/wired
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/