[PATCH v4 00/26] ARM: pxa: magician: Rework HTC Magician support

From: Petr Cvek
Date: Mon Sep 28 2015 - 17:04:13 EST

This patchset will clean, fix, optimize and add multiple devices,
which can be found on the HTC Magician machine.

Platform data for the pasic3-leds driver has been removed, as this
driver do not exist in the vanilla. And it is expected to be recreated
in the future with an incompatible platform data structure.

Default setting of the Samsung LCD pixel clock period has been
increased, so resulting frequency is 50Hz (original 117Hz). Period
can be possibly incresed even more. At this moment there is no video
player with IWMMXT support and software only versions cannot make it
to 30fps. Frequency decreasing has a good impact to memory troughtput
as LCD controller does not do as many memory bursts as at original
speed. This was verified with the lat_mem_rd from the lmbench3.

The Omnivision OV9640 camera has a problem with running on 400kHz
of the I2C clock. It seems it freezes the bus until PXA I2C driver
reload. Datasheet says it OK on 400kHz though. There may be some
compatibility bug in the PXA I2C driver as Omnivision cameras often
uses special I2C protocol (SCCB).

Using the CPU frequency scaling (with help of an MAX1587A regulator)
sometimes causes an SoC failure. It is probably related to the PXA27x
erratum E37, E36, E80 or E89. Infreqent changes mostly works.

STUART removal is a prepare for:

net: irda: pxaficp_ir: dmaengine conversion

Function was tested on the board_id 0x3a version (specifically on
the T-Mobile MDA compact).

Changes from v3:
* Nontrivial rebase for indentation fixup (EGPIO and PXA UDC)

Petr Cvek (26):
ARM: pxa: magician: Fix indentation in machine files
ARM: pxa: magician: Change comments to be more informative
ARM: pxa: magician: Print more specific error message for global
ARM: pxa: magician: Optimize debug messages for LCD power
ARM: pxa: magician: Change description of LCD power GPIO
ARM: pxa: magician: Add new discovered EGPIO pins
ARM: pxa: magician: Fix HTC Magician pin mux definitions
ARM: pxa: magician: Rename abstract LCD GPIOs
ARM: pxa: magician: Optimize powerup delays for Samsung LCD
ARM: pxa: magician: Optimize Samsung LCD refresh to 50Hz
ARM: pxa: magician: Optimize EGPIO initial values
ARM: pxa: magician: Rename charger cable detection EGPIOs
ARM: pxa: magician: Fix and add charging detection functions
ARM: pxa: magician: Fix platform data for both PXA27x I2C controllers
ARM: pxa: magician: Fix redundant GPIO request for pxaficp_ir
ARM: pxa: magician: Fix support for Intel Strata NOR Flash
ARM: pxa: magician: Fix wrongly enabled USB host ports
ARM: pxa: magician: Add support for ADS7846
ARM: pxa: magician: Add support for Omnivision OV9640 camera
ARM: pxa: magician: Add support for MAX1587A Vcore regulator
ARM: pxa: magician: Add support for PXA27x UDC
ARM: pxa: magician: Remove pdata for pasic3-leds
ARM: pxa: magician: Remove definition of the STUART port
ARM: pxa: magician: Add debug message for backlight brightness
ARM: pxa: magician: Add missing regulator for PWM backlight
ARM: pxa: magician: Move platform_add_devices() to the end of

arch/arm/mach-pxa/include/mach/magician.h | 70 ++-
arch/arm/mach-pxa/magician.c | 907 +++++++++++++++++++++---------
2 files changed, 678 insertions(+), 299 deletions(-)


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/